Closing Down on Apache Camel 3.1

classic Classic list List threaded Threaded
95 messages Options
12345
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Andrea Cosentino-3
If we want to cut 3.1.0 I'm fine with it I can add the other aws2
components later

Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha scritto:

> So we want an RC right? So we are doing rc1? Or do we want a final
> release? I still have to finish the aws2 components
>
> Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha scritto:
>
>> Hi
>>
>> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
>> etc which we did for 3.0.
>> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
>> to upgrade to 3.1.0.
>>
>> And then we can work on 3.2 and get it released within a couple of
>> months or so, eg to get innovation out quicker to the community.
>> Especially now as we have kafka connectors, quarkus, spring boot as
>> sub projects and they all need to innovate, especially the first two.
>>
>>
>> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
>> <[hidden email]> wrote:
>> >
>> > I didn't read RC.. I'm getting old
>> >
>> > Inviato da Yahoo Mail su Android
>> >
>> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<[hidden email]>
>> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
>> release of 3.1.
>> >
>> > Sorry, I misunderstood
>> >
>> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
>> scritto:
>> >
>> > > Hi
>> > >
>> > > Oh sorry I think its actually better to get an RC cut this weekend.
>> > > The code is ready as-is.
>> > > Even though I found a little optimization I am currently working on.
>> > >
>> > > There are end users whom want 3.1 now as 3.0 is "using too much object
>> > > allocations".
>> > >
>> > > Gregor so if you can find time then let us know.
>> > >
>> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <[hidden email]>
>> > > wrote:
>> > > >
>> > > > Hello Gregor,
>> > > >
>> > > > There is still some work pending.
>> > > >
>> > > > Probably torwards the end of February.
>> > > >
>> > > > Thanks for your time
>> > > >
>> > > >
>> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <[hidden email]>
>> ha
>> > > > scritto:
>> > > >
>> > > > > Absolutely, should we cut an RC this weekend already?
>> > > > >
>> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <[hidden email]>
>> > > wrote:
>> > > > >
>> > > > > > Hi
>> > > > > >
>> > > > > > The OSGi blueprint issue has been fixed, it works now again for
>> both
>> > > > > > JDK8 and 11 on Karaf.
>> > > > > >
>> > > > > > Gregor if you are listening, then can you let us know if you
>> have
>> > > time
>> > > > > > in the foreseeable future to built the release?
>> > > > > >
>> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
>> [hidden email]>
>> > > > > wrote:
>> > > > > > >
>> > > > > > > Hi
>> > > > > > >
>> > > > > > > Okay so things are going well.
>> > > > > > >
>> > > > > > > The examples has been migrated.
>> > > > > > > Spring Boot documentation is now online on the website. And
>> the
>> > > auto
>> > > > > > > configuration options is included in the component doc of
>> those
>> > > whom
>> > > > > > > support SB (see bottom).
>> > > > > > > Camel Kafka Connector doc is now also online.
>> > > > > > >
>> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
>> This
>> > > works
>> > > > > > > with JDK11.
>> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
>> > > > > > >
>> > > > > > > As this potentially is a hard issue to resolve, then we can
>> add
>> > > this
>> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
>> worst-case
>> > > > > > > for 3.2 if we need bigger changes.
>> > > > > > >
>> > > > > > > The CI server looks good. I fixed the ES test errors that was
>> > > flaky.
>> > > > > > > The other test errors were also related to "port number in
>> use"
>> > > etc.
>> > > > > > >
>> > > > > > > For JDK11 there are 2 cxf test errors related to SSL security
>> > > > > > >
>> > > > > >
>> > > > >
>> > >
>> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
>> > > > > > >
>> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
>> > > [hidden email]>
>> > > > > > wrote:
>> > > > > > > >
>> > > > > > > > Hi
>> > > > > > > >
>> > > > > > > > Oh we have even more awesome progress now.
>> > > > > > > >
>> > > > > > > > All the work with reflection vs source code generated
>> > > configurers has
>> > > > > > bene done.
>> > > > > > > > And also on the model with the property placeholders. Thats
>> a
>> > > great
>> > > > > > > > win as we avoid loading 200 classes and have about 90kb map
>> > > object
>> > > > > > > > instance in memory (biggest object domination from Camel
>> > > according to
>> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
>> > > > > > > >
>> > > > > > > > The OSGi blueprint issue has also been fixed.
>> > > > > > > >
>> > > > > > > > The examples are currently being migrated and its removed
>> from
>> > > the
>> > > > > > main repo.
>> > > > > > > > Omar is working on this.
>> > > > > > > >
>> > > > > > > > The spring boot still has outstanding to have the docs and
>> its
>> > > > > website
>> > > > > > > > as part of the Camel website.
>> > > > > > > > Zoran will help with this.
>> > > > > > > >
>> > > > > > > > The etcd component has a wrong structure with
>> > > endpoints/components.
>> > > > > > > > I will look into this.
>> > > > > > > >
>> > > > > > > > The snakeyaml component needs to be deprecated, and if we
>> have
>> > > the
>> > > > > > > > time to add jacksonyaml as a new yaml dataformat and use it
>> as
>> > > > > > > > default.
>> > > > > > > > And if so remove snakeyaml.
>> > > > > > > >
>> > > > > > > > And then we need to fix test failures on CI on both JDK8 and
>> > > JDK11
>> > > > > > > >
>> > > > > > > > And I may add a few more optimizations.
>> > > > > > > >
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
>> > > [hidden email]>
>> > > > > > wrote:
>> > > > > > > > >
>> > > > > > > > > Hi
>> > > > > > > > >
>> > > > > > > > > I just wanted to start the process of getting closer to
>> Camel
>> > > 3.1
>> > > > > > release.
>> > > > > > > > > Despite 3.0 was released only a while back, then we have
>> made
>> > > great
>> > > > > > > > > progress on 3.1 that is important to get in the hands of
>> the
>> > > Camel
>> > > > > > > > > users. And for Camel users that migrate to 3.x can then
>> skip
>> > > 3.0
>> > > > > and
>> > > > > > > > > go straight to 3.1.
>> > > > > > > > >
>> > > > > > > > > I am working on some further optimizations in the core
>> for 3.1,
>> > > > > and I
>> > > > > > > > > hope to find time to share more details in a blog.
>> > > > > > > > >
>> > > > > > > > > However to get the other work (high level) done and ready
>> for
>> > > 3.1,
>> > > > > > > > > then lets discuss them here on the @dev mailing list.
>> > > > > > > > >
>> > > > > > > > > On top of my head we have to do
>> > > > > > > > >
>> > > > > > > > > 1)
>> > > > > > > > > Finish the separation of camel-spring-boot (there are some
>> > > tools
>> > > > > that
>> > > > > > > > > update docs and generate component list) that needs to be
>> > > > > completed.
>> > > > > > > > >
>> > > > > > > > > 2)
>> > > > > > > > > Generate source code configurer for data formats and
>> languages
>> > > > > > > > >
>> > > > > > > > > 3)
>> > > > > > > > > The component configuration fluent builder (would be nice)
>> > > > > > > > >
>> > > > > > > > > 4)
>> > > > > > > > > More camel AWS SDK2 components
>> > > > > > > > >
>> > > > > > > > > 5)
>> > > > > > > > > Camel Main to plugin the new lightweight XML route
>> > > parser/loader
>> > > > > (for
>> > > > > > > > > example auto discover on classpath the JAR and use it
>> instead
>> > > of
>> > > > > > JAXB)
>> > > > > > > > >
>> > > > > > > > > There are other things of course, but these are the
>> bigger high
>> > > > > level
>> > > > > > > > > things I could remember.
>> > > > > > > > >
>> > > > > > > > > The usual work with new components, examples, other
>> > > improvements is
>> > > > > > of
>> > > > > > > > > course also ongoing.
>> > > > > > > > >
>> > > > > > > > > Lets see if we can get this done and release Camel 3.1 in
>> > > February.
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > > --
>> > > > > > > > > Claus Ibsen
>> > > > > > > > > -----------------
>> > > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > > > >
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Claus Ibsen
>> > > > > > > > -----------------
>> > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > --
>> > > > > > > Claus Ibsen
>> > > > > > > -----------------
>> > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Claus Ibsen
>> > > > > > -----------------
>> > > > > > http://davsclaus.com @davsclaus
>> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > >
>> > > > >
>> > >
>> > >
>> > >
>> > > --
>> > > Claus Ibsen
>> > > -----------------
>> > > http://davsclaus.com @davsclaus
>> > > Camel in Action 2: https://www.manning.com/ibsen2
>> > >
>> >
>>
>>
>> --
>> Claus Ibsen
>> -----------------
>> http://davsclaus.com @davsclaus
>> Camel in Action 2: https://www.manning.com/ibsen2
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Claus Ibsen-2
Hi

There are a few things I am working on. I will let you know later
today when its done and the code base should be ready for cutting the
3.1.0 release.

On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]> wrote:

>
> If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> components later
>
> Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha scritto:
>
> > So we want an RC right? So we are doing rc1? Or do we want a final
> > release? I still have to finish the aws2 components
> >
> > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha scritto:
> >
> >> Hi
> >>
> >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> >> etc which we did for 3.0.
> >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> >> to upgrade to 3.1.0.
> >>
> >> And then we can work on 3.2 and get it released within a couple of
> >> months or so, eg to get innovation out quicker to the community.
> >> Especially now as we have kafka connectors, quarkus, spring boot as
> >> sub projects and they all need to innovate, especially the first two.
> >>
> >>
> >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> >> <[hidden email]> wrote:
> >> >
> >> > I didn't read RC.. I'm getting old
> >> >
> >> > Inviato da Yahoo Mail su Android
> >> >
> >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<[hidden email]>
> >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> >> release of 3.1.
> >> >
> >> > Sorry, I misunderstood
> >> >
> >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> >> scritto:
> >> >
> >> > > Hi
> >> > >
> >> > > Oh sorry I think its actually better to get an RC cut this weekend.
> >> > > The code is ready as-is.
> >> > > Even though I found a little optimization I am currently working on.
> >> > >
> >> > > There are end users whom want 3.1 now as 3.0 is "using too much object
> >> > > allocations".
> >> > >
> >> > > Gregor so if you can find time then let us know.
> >> > >
> >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <[hidden email]>
> >> > > wrote:
> >> > > >
> >> > > > Hello Gregor,
> >> > > >
> >> > > > There is still some work pending.
> >> > > >
> >> > > > Probably torwards the end of February.
> >> > > >
> >> > > > Thanks for your time
> >> > > >
> >> > > >
> >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <[hidden email]>
> >> ha
> >> > > > scritto:
> >> > > >
> >> > > > > Absolutely, should we cut an RC this weekend already?
> >> > > > >
> >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <[hidden email]>
> >> > > wrote:
> >> > > > >
> >> > > > > > Hi
> >> > > > > >
> >> > > > > > The OSGi blueprint issue has been fixed, it works now again for
> >> both
> >> > > > > > JDK8 and 11 on Karaf.
> >> > > > > >
> >> > > > > > Gregor if you are listening, then can you let us know if you
> >> have
> >> > > time
> >> > > > > > in the foreseeable future to built the release?
> >> > > > > >
> >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> >> [hidden email]>
> >> > > > > wrote:
> >> > > > > > >
> >> > > > > > > Hi
> >> > > > > > >
> >> > > > > > > Okay so things are going well.
> >> > > > > > >
> >> > > > > > > The examples has been migrated.
> >> > > > > > > Spring Boot documentation is now online on the website. And
> >> the
> >> > > auto
> >> > > > > > > configuration options is included in the component doc of
> >> those
> >> > > whom
> >> > > > > > > support SB (see bottom).
> >> > > > > > > Camel Kafka Connector doc is now also online.
> >> > > > > > >
> >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> >> This
> >> > > works
> >> > > > > > > with JDK11.
> >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> >> > > > > > >
> >> > > > > > > As this potentially is a hard issue to resolve, then we can
> >> add
> >> > > this
> >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> >> worst-case
> >> > > > > > > for 3.2 if we need bigger changes.
> >> > > > > > >
> >> > > > > > > The CI server looks good. I fixed the ES test errors that was
> >> > > flaky.
> >> > > > > > > The other test errors were also related to "port number in
> >> use"
> >> > > etc.
> >> > > > > > >
> >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL security
> >> > > > > > >
> >> > > > > >
> >> > > > >
> >> > >
> >> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> >> > > > > > >
> >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> >> > > [hidden email]>
> >> > > > > > wrote:
> >> > > > > > > >
> >> > > > > > > > Hi
> >> > > > > > > >
> >> > > > > > > > Oh we have even more awesome progress now.
> >> > > > > > > >
> >> > > > > > > > All the work with reflection vs source code generated
> >> > > configurers has
> >> > > > > > bene done.
> >> > > > > > > > And also on the model with the property placeholders. Thats
> >> a
> >> > > great
> >> > > > > > > > win as we avoid loading 200 classes and have about 90kb map
> >> > > object
> >> > > > > > > > instance in memory (biggest object domination from Camel
> >> > > according to
> >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> >> > > > > > > >
> >> > > > > > > > The OSGi blueprint issue has also been fixed.
> >> > > > > > > >
> >> > > > > > > > The examples are currently being migrated and its removed
> >> from
> >> > > the
> >> > > > > > main repo.
> >> > > > > > > > Omar is working on this.
> >> > > > > > > >
> >> > > > > > > > The spring boot still has outstanding to have the docs and
> >> its
> >> > > > > website
> >> > > > > > > > as part of the Camel website.
> >> > > > > > > > Zoran will help with this.
> >> > > > > > > >
> >> > > > > > > > The etcd component has a wrong structure with
> >> > > endpoints/components.
> >> > > > > > > > I will look into this.
> >> > > > > > > >
> >> > > > > > > > The snakeyaml component needs to be deprecated, and if we
> >> have
> >> > > the
> >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and use it
> >> as
> >> > > > > > > > default.
> >> > > > > > > > And if so remove snakeyaml.
> >> > > > > > > >
> >> > > > > > > > And then we need to fix test failures on CI on both JDK8 and
> >> > > JDK11
> >> > > > > > > >
> >> > > > > > > > And I may add a few more optimizations.
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> >> > > [hidden email]>
> >> > > > > > wrote:
> >> > > > > > > > >
> >> > > > > > > > > Hi
> >> > > > > > > > >
> >> > > > > > > > > I just wanted to start the process of getting closer to
> >> Camel
> >> > > 3.1
> >> > > > > > release.
> >> > > > > > > > > Despite 3.0 was released only a while back, then we have
> >> made
> >> > > great
> >> > > > > > > > > progress on 3.1 that is important to get in the hands of
> >> the
> >> > > Camel
> >> > > > > > > > > users. And for Camel users that migrate to 3.x can then
> >> skip
> >> > > 3.0
> >> > > > > and
> >> > > > > > > > > go straight to 3.1.
> >> > > > > > > > >
> >> > > > > > > > > I am working on some further optimizations in the core
> >> for 3.1,
> >> > > > > and I
> >> > > > > > > > > hope to find time to share more details in a blog.
> >> > > > > > > > >
> >> > > > > > > > > However to get the other work (high level) done and ready
> >> for
> >> > > 3.1,
> >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> >> > > > > > > > >
> >> > > > > > > > > On top of my head we have to do
> >> > > > > > > > >
> >> > > > > > > > > 1)
> >> > > > > > > > > Finish the separation of camel-spring-boot (there are some
> >> > > tools
> >> > > > > that
> >> > > > > > > > > update docs and generate component list) that needs to be
> >> > > > > completed.
> >> > > > > > > > >
> >> > > > > > > > > 2)
> >> > > > > > > > > Generate source code configurer for data formats and
> >> languages
> >> > > > > > > > >
> >> > > > > > > > > 3)
> >> > > > > > > > > The component configuration fluent builder (would be nice)
> >> > > > > > > > >
> >> > > > > > > > > 4)
> >> > > > > > > > > More camel AWS SDK2 components
> >> > > > > > > > >
> >> > > > > > > > > 5)
> >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> >> > > parser/loader
> >> > > > > (for
> >> > > > > > > > > example auto discover on classpath the JAR and use it
> >> instead
> >> > > of
> >> > > > > > JAXB)
> >> > > > > > > > >
> >> > > > > > > > > There are other things of course, but these are the
> >> bigger high
> >> > > > > level
> >> > > > > > > > > things I could remember.
> >> > > > > > > > >
> >> > > > > > > > > The usual work with new components, examples, other
> >> > > improvements is
> >> > > > > > of
> >> > > > > > > > > course also ongoing.
> >> > > > > > > > >
> >> > > > > > > > > Lets see if we can get this done and release Camel 3.1 in
> >> > > February.
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > > --
> >> > > > > > > > > Claus Ibsen
> >> > > > > > > > > -----------------
> >> > > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > > --
> >> > > > > > > > Claus Ibsen
> >> > > > > > > > -----------------
> >> > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > > --
> >> > > > > > > Claus Ibsen
> >> > > > > > > -----------------
> >> > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > --
> >> > > > > > Claus Ibsen
> >> > > > > > -----------------
> >> > > > > > http://davsclaus.com @davsclaus
> >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > >
> >> > > > >
> >> > >
> >> > >
> >> > >
> >> > > --
> >> > > Claus Ibsen
> >> > > -----------------
> >> > > http://davsclaus.com @davsclaus
> >> > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > >
> >> >
> >>
> >>
> >> --
> >> Claus Ibsen
> >> -----------------
> >> http://davsclaus.com @davsclaus
> >> Camel in Action 2: https://www.manning.com/ibsen2
> >>
> >



--
Claus Ibsen
-----------------
http://davsclaus.com @davsclaus
Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
Thanks for the heads-up.

On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:

> Hi
>
> There are a few things I am working on. I will let you know later
> today when its done and the code base should be ready for cutting the
> 3.1.0 release.
>
> On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> wrote:
> >
> > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > components later
> >
> > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> scritto:
> >
> > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > release? I still have to finish the aws2 components
> > >
> > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> scritto:
> > >
> > >> Hi
> > >>
> > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > >> etc which we did for 3.0.
> > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > >> to upgrade to 3.1.0.
> > >>
> > >> And then we can work on 3.2 and get it released within a couple of
> > >> months or so, eg to get innovation out quicker to the community.
> > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > >> sub projects and they all need to innovate, especially the first two.
> > >>
> > >>
> > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > >> <[hidden email]> wrote:
> > >> >
> > >> > I didn't read RC.. I'm getting old
> > >> >
> > >> > Inviato da Yahoo Mail su Android
> > >> >
> > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> [hidden email]>
> > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > >> release of 3.1.
> > >> >
> > >> > Sorry, I misunderstood
> > >> >
> > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > >> scritto:
> > >> >
> > >> > > Hi
> > >> > >
> > >> > > Oh sorry I think its actually better to get an RC cut this
> weekend.
> > >> > > The code is ready as-is.
> > >> > > Even though I found a little optimization I am currently working
> on.
> > >> > >
> > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> object
> > >> > > allocations".
> > >> > >
> > >> > > Gregor so if you can find time then let us know.
> > >> > >
> > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> [hidden email]>
> > >> > > wrote:
> > >> > > >
> > >> > > > Hello Gregor,
> > >> > > >
> > >> > > > There is still some work pending.
> > >> > > >
> > >> > > > Probably torwards the end of February.
> > >> > > >
> > >> > > > Thanks for your time
> > >> > > >
> > >> > > >
> > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> [hidden email]>
> > >> ha
> > >> > > > scritto:
> > >> > > >
> > >> > > > > Absolutely, should we cut an RC this weekend already?
> > >> > > > >
> > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> [hidden email]>
> > >> > > wrote:
> > >> > > > >
> > >> > > > > > Hi
> > >> > > > > >
> > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> for
> > >> both
> > >> > > > > > JDK8 and 11 on Karaf.
> > >> > > > > >
> > >> > > > > > Gregor if you are listening, then can you let us know if you
> > >> have
> > >> > > time
> > >> > > > > > in the foreseeable future to built the release?
> > >> > > > > >
> > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > >> [hidden email]>
> > >> > > > > wrote:
> > >> > > > > > >
> > >> > > > > > > Hi
> > >> > > > > > >
> > >> > > > > > > Okay so things are going well.
> > >> > > > > > >
> > >> > > > > > > The examples has been migrated.
> > >> > > > > > > Spring Boot documentation is now online on the website.
> And
> > >> the
> > >> > > auto
> > >> > > > > > > configuration options is included in the component doc of
> > >> those
> > >> > > whom
> > >> > > > > > > support SB (see bottom).
> > >> > > > > > > Camel Kafka Connector doc is now also online.
> > >> > > > > > >
> > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > >> This
> > >> > > works
> > >> > > > > > > with JDK11.
> > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > >> > > > > > >
> > >> > > > > > > As this potentially is a hard issue to resolve, then we
> can
> > >> add
> > >> > > this
> > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > >> worst-case
> > >> > > > > > > for 3.2 if we need bigger changes.
> > >> > > > > > >
> > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> was
> > >> > > flaky.
> > >> > > > > > > The other test errors were also related to "port number in
> > >> use"
> > >> > > etc.
> > >> > > > > > >
> > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> security
> > >> > > > > > >
> > >> > > > > >
> > >> > > > >
> > >> > >
> > >>
> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > >> > > > > > >
> > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > >> > > [hidden email]>
> > >> > > > > > wrote:
> > >> > > > > > > >
> > >> > > > > > > > Hi
> > >> > > > > > > >
> > >> > > > > > > > Oh we have even more awesome progress now.
> > >> > > > > > > >
> > >> > > > > > > > All the work with reflection vs source code generated
> > >> > > configurers has
> > >> > > > > > bene done.
> > >> > > > > > > > And also on the model with the property placeholders.
> Thats
> > >> a
> > >> > > great
> > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> map
> > >> > > object
> > >> > > > > > > > instance in memory (biggest object domination from Camel
> > >> > > according to
> > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > >> > > > > > > >
> > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > >> > > > > > > >
> > >> > > > > > > > The examples are currently being migrated and its
> removed
> > >> from
> > >> > > the
> > >> > > > > > main repo.
> > >> > > > > > > > Omar is working on this.
> > >> > > > > > > >
> > >> > > > > > > > The spring boot still has outstanding to have the docs
> and
> > >> its
> > >> > > > > website
> > >> > > > > > > > as part of the Camel website.
> > >> > > > > > > > Zoran will help with this.
> > >> > > > > > > >
> > >> > > > > > > > The etcd component has a wrong structure with
> > >> > > endpoints/components.
> > >> > > > > > > > I will look into this.
> > >> > > > > > > >
> > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> we
> > >> have
> > >> > > the
> > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> use it
> > >> as
> > >> > > > > > > > default.
> > >> > > > > > > > And if so remove snakeyaml.
> > >> > > > > > > >
> > >> > > > > > > > And then we need to fix test failures on CI on both
> JDK8 and
> > >> > > JDK11
> > >> > > > > > > >
> > >> > > > > > > > And I may add a few more optimizations.
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > >> > > [hidden email]>
> > >> > > > > > wrote:
> > >> > > > > > > > >
> > >> > > > > > > > > Hi
> > >> > > > > > > > >
> > >> > > > > > > > > I just wanted to start the process of getting closer
> to
> > >> Camel
> > >> > > 3.1
> > >> > > > > > release.
> > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> have
> > >> made
> > >> > > great
> > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> of
> > >> the
> > >> > > Camel
> > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> then
> > >> skip
> > >> > > 3.0
> > >> > > > > and
> > >> > > > > > > > > go straight to 3.1.
> > >> > > > > > > > >
> > >> > > > > > > > > I am working on some further optimizations in the core
> > >> for 3.1,
> > >> > > > > and I
> > >> > > > > > > > > hope to find time to share more details in a blog.
> > >> > > > > > > > >
> > >> > > > > > > > > However to get the other work (high level) done and
> ready
> > >> for
> > >> > > 3.1,
> > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > >> > > > > > > > >
> > >> > > > > > > > > On top of my head we have to do
> > >> > > > > > > > >
> > >> > > > > > > > > 1)
> > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> some
> > >> > > tools
> > >> > > > > that
> > >> > > > > > > > > update docs and generate component list) that needs
> to be
> > >> > > > > completed.
> > >> > > > > > > > >
> > >> > > > > > > > > 2)
> > >> > > > > > > > > Generate source code configurer for data formats and
> > >> languages
> > >> > > > > > > > >
> > >> > > > > > > > > 3)
> > >> > > > > > > > > The component configuration fluent builder (would be
> nice)
> > >> > > > > > > > >
> > >> > > > > > > > > 4)
> > >> > > > > > > > > More camel AWS SDK2 components
> > >> > > > > > > > >
> > >> > > > > > > > > 5)
> > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > >> > > parser/loader
> > >> > > > > (for
> > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > >> instead
> > >> > > of
> > >> > > > > > JAXB)
> > >> > > > > > > > >
> > >> > > > > > > > > There are other things of course, but these are the
> > >> bigger high
> > >> > > > > level
> > >> > > > > > > > > things I could remember.
> > >> > > > > > > > >
> > >> > > > > > > > > The usual work with new components, examples, other
> > >> > > improvements is
> > >> > > > > > of
> > >> > > > > > > > > course also ongoing.
> > >> > > > > > > > >
> > >> > > > > > > > > Lets see if we can get this done and release Camel
> 3.1 in
> > >> > > February.
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > > --
> > >> > > > > > > > > Claus Ibsen
> > >> > > > > > > > > -----------------
> > >> > > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > > --
> > >> > > > > > > > Claus Ibsen
> > >> > > > > > > > -----------------
> > >> > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > > >
> > >> > > > > > >
> > >> > > > > > >
> > >> > > > > > > --
> > >> > > > > > > Claus Ibsen
> > >> > > > > > > -----------------
> > >> > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > >
> > >> > > > > >
> > >> > > > > >
> > >> > > > > > --
> > >> > > > > > Claus Ibsen
> > >> > > > > > -----------------
> > >> > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > >
> > >> > > > >
> > >> > >
> > >> > >
> > >> > >
> > >> > > --
> > >> > > Claus Ibsen
> > >> > > -----------------
> > >> > > http://davsclaus.com @davsclaus
> > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > >
> > >> >
> > >>
> > >>
> > >> --
> > >> Claus Ibsen
> > >> -----------------
> > >> http://davsclaus.com @davsclaus
> > >> Camel in Action 2: https://www.manning.com/ibsen2
> > >>
> > >
>
>
>
> --
> Claus Ibsen
> -----------------
> http://davsclaus.com @davsclaus
> Camel in Action 2: https://www.manning.com/ibsen2
>
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Claus Ibsen-2
Hi

I am still working, running final set of tests before pushing.

There were just a few too good optimizations in core type converter
that I couldn't let go without.


On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
<[hidden email]> wrote:

>
> Thanks for the heads-up.
>
> On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:
>
> > Hi
> >
> > There are a few things I am working on. I will let you know later
> > today when its done and the code base should be ready for cutting the
> > 3.1.0 release.
> >
> > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> > wrote:
> > >
> > > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > > components later
> > >
> > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> > scritto:
> > >
> > > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > > release? I still have to finish the aws2 components
> > > >
> > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> > scritto:
> > > >
> > > >> Hi
> > > >>
> > > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > > >> etc which we did for 3.0.
> > > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > > >> to upgrade to 3.1.0.
> > > >>
> > > >> And then we can work on 3.2 and get it released within a couple of
> > > >> months or so, eg to get innovation out quicker to the community.
> > > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > > >> sub projects and they all need to innovate, especially the first two.
> > > >>
> > > >>
> > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > >> <[hidden email]> wrote:
> > > >> >
> > > >> > I didn't read RC.. I'm getting old
> > > >> >
> > > >> > Inviato da Yahoo Mail su Android
> > > >> >
> > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > [hidden email]>
> > > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > > >> release of 3.1.
> > > >> >
> > > >> > Sorry, I misunderstood
> > > >> >
> > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > > >> scritto:
> > > >> >
> > > >> > > Hi
> > > >> > >
> > > >> > > Oh sorry I think its actually better to get an RC cut this
> > weekend.
> > > >> > > The code is ready as-is.
> > > >> > > Even though I found a little optimization I am currently working
> > on.
> > > >> > >
> > > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> > object
> > > >> > > allocations".
> > > >> > >
> > > >> > > Gregor so if you can find time then let us know.
> > > >> > >
> > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > [hidden email]>
> > > >> > > wrote:
> > > >> > > >
> > > >> > > > Hello Gregor,
> > > >> > > >
> > > >> > > > There is still some work pending.
> > > >> > > >
> > > >> > > > Probably torwards the end of February.
> > > >> > > >
> > > >> > > > Thanks for your time
> > > >> > > >
> > > >> > > >
> > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > [hidden email]>
> > > >> ha
> > > >> > > > scritto:
> > > >> > > >
> > > >> > > > > Absolutely, should we cut an RC this weekend already?
> > > >> > > > >
> > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > [hidden email]>
> > > >> > > wrote:
> > > >> > > > >
> > > >> > > > > > Hi
> > > >> > > > > >
> > > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> > for
> > > >> both
> > > >> > > > > > JDK8 and 11 on Karaf.
> > > >> > > > > >
> > > >> > > > > > Gregor if you are listening, then can you let us know if you
> > > >> have
> > > >> > > time
> > > >> > > > > > in the foreseeable future to built the release?
> > > >> > > > > >
> > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > >> [hidden email]>
> > > >> > > > > wrote:
> > > >> > > > > > >
> > > >> > > > > > > Hi
> > > >> > > > > > >
> > > >> > > > > > > Okay so things are going well.
> > > >> > > > > > >
> > > >> > > > > > > The examples has been migrated.
> > > >> > > > > > > Spring Boot documentation is now online on the website.
> > And
> > > >> the
> > > >> > > auto
> > > >> > > > > > > configuration options is included in the component doc of
> > > >> those
> > > >> > > whom
> > > >> > > > > > > support SB (see bottom).
> > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > >> > > > > > >
> > > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > > >> This
> > > >> > > works
> > > >> > > > > > > with JDK11.
> > > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > >> > > > > > >
> > > >> > > > > > > As this potentially is a hard issue to resolve, then we
> > can
> > > >> add
> > > >> > > this
> > > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > > >> worst-case
> > > >> > > > > > > for 3.2 if we need bigger changes.
> > > >> > > > > > >
> > > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> > was
> > > >> > > flaky.
> > > >> > > > > > > The other test errors were also related to "port number in
> > > >> use"
> > > >> > > etc.
> > > >> > > > > > >
> > > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> > security
> > > >> > > > > > >
> > > >> > > > > >
> > > >> > > > >
> > > >> > >
> > > >>
> > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > >> > > > > > >
> > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > >> > > [hidden email]>
> > > >> > > > > > wrote:
> > > >> > > > > > > >
> > > >> > > > > > > > Hi
> > > >> > > > > > > >
> > > >> > > > > > > > Oh we have even more awesome progress now.
> > > >> > > > > > > >
> > > >> > > > > > > > All the work with reflection vs source code generated
> > > >> > > configurers has
> > > >> > > > > > bene done.
> > > >> > > > > > > > And also on the model with the property placeholders.
> > Thats
> > > >> a
> > > >> > > great
> > > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> > map
> > > >> > > object
> > > >> > > > > > > > instance in memory (biggest object domination from Camel
> > > >> > > according to
> > > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > > >> > > > > > > >
> > > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > > >> > > > > > > >
> > > >> > > > > > > > The examples are currently being migrated and its
> > removed
> > > >> from
> > > >> > > the
> > > >> > > > > > main repo.
> > > >> > > > > > > > Omar is working on this.
> > > >> > > > > > > >
> > > >> > > > > > > > The spring boot still has outstanding to have the docs
> > and
> > > >> its
> > > >> > > > > website
> > > >> > > > > > > > as part of the Camel website.
> > > >> > > > > > > > Zoran will help with this.
> > > >> > > > > > > >
> > > >> > > > > > > > The etcd component has a wrong structure with
> > > >> > > endpoints/components.
> > > >> > > > > > > > I will look into this.
> > > >> > > > > > > >
> > > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> > we
> > > >> have
> > > >> > > the
> > > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> > use it
> > > >> as
> > > >> > > > > > > > default.
> > > >> > > > > > > > And if so remove snakeyaml.
> > > >> > > > > > > >
> > > >> > > > > > > > And then we need to fix test failures on CI on both
> > JDK8 and
> > > >> > > JDK11
> > > >> > > > > > > >
> > > >> > > > > > > > And I may add a few more optimizations.
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > > >> > > [hidden email]>
> > > >> > > > > > wrote:
> > > >> > > > > > > > >
> > > >> > > > > > > > > Hi
> > > >> > > > > > > > >
> > > >> > > > > > > > > I just wanted to start the process of getting closer
> > to
> > > >> Camel
> > > >> > > 3.1
> > > >> > > > > > release.
> > > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> > have
> > > >> made
> > > >> > > great
> > > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> > of
> > > >> the
> > > >> > > Camel
> > > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> > then
> > > >> skip
> > > >> > > 3.0
> > > >> > > > > and
> > > >> > > > > > > > > go straight to 3.1.
> > > >> > > > > > > > >
> > > >> > > > > > > > > I am working on some further optimizations in the core
> > > >> for 3.1,
> > > >> > > > > and I
> > > >> > > > > > > > > hope to find time to share more details in a blog.
> > > >> > > > > > > > >
> > > >> > > > > > > > > However to get the other work (high level) done and
> > ready
> > > >> for
> > > >> > > 3.1,
> > > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > > >> > > > > > > > >
> > > >> > > > > > > > > On top of my head we have to do
> > > >> > > > > > > > >
> > > >> > > > > > > > > 1)
> > > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> > some
> > > >> > > tools
> > > >> > > > > that
> > > >> > > > > > > > > update docs and generate component list) that needs
> > to be
> > > >> > > > > completed.
> > > >> > > > > > > > >
> > > >> > > > > > > > > 2)
> > > >> > > > > > > > > Generate source code configurer for data formats and
> > > >> languages
> > > >> > > > > > > > >
> > > >> > > > > > > > > 3)
> > > >> > > > > > > > > The component configuration fluent builder (would be
> > nice)
> > > >> > > > > > > > >
> > > >> > > > > > > > > 4)
> > > >> > > > > > > > > More camel AWS SDK2 components
> > > >> > > > > > > > >
> > > >> > > > > > > > > 5)
> > > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > > >> > > parser/loader
> > > >> > > > > (for
> > > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > > >> instead
> > > >> > > of
> > > >> > > > > > JAXB)
> > > >> > > > > > > > >
> > > >> > > > > > > > > There are other things of course, but these are the
> > > >> bigger high
> > > >> > > > > level
> > > >> > > > > > > > > things I could remember.
> > > >> > > > > > > > >
> > > >> > > > > > > > > The usual work with new components, examples, other
> > > >> > > improvements is
> > > >> > > > > > of
> > > >> > > > > > > > > course also ongoing.
> > > >> > > > > > > > >
> > > >> > > > > > > > > Lets see if we can get this done and release Camel
> > 3.1 in
> > > >> > > February.
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > > --
> > > >> > > > > > > > > Claus Ibsen
> > > >> > > > > > > > > -----------------
> > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > > --
> > > >> > > > > > > > Claus Ibsen
> > > >> > > > > > > > -----------------
> > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > > >
> > > >> > > > > > >
> > > >> > > > > > >
> > > >> > > > > > > --
> > > >> > > > > > > Claus Ibsen
> > > >> > > > > > > -----------------
> > > >> > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > > > --
> > > >> > > > > > Claus Ibsen
> > > >> > > > > > -----------------
> > > >> > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > >
> > > >> > > > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > --
> > > >> > > Claus Ibsen
> > > >> > > -----------------
> > > >> > > http://davsclaus.com @davsclaus
> > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > >
> > > >> >
> > > >>
> > > >>
> > > >> --
> > > >> Claus Ibsen
> > > >> -----------------
> > > >> http://davsclaus.com @davsclaus
> > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > >>
> > > >
> >
> >
> >
> > --
> > Claus Ibsen
> > -----------------
> > http://davsclaus.com @davsclaus
> > Camel in Action 2: https://www.manning.com/ibsen2
> >



--
Claus Ibsen
-----------------
http://davsclaus.com @davsclaus
Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Claus Ibsen-2
Hi

Okay it should all be done now. The last bits at pushed and the code
base is ready for the release.
The RAT plugin has been run and fixed license issues and also CS
should be fixed.

On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]> wrote:

>
> Hi
>
> I am still working, running final set of tests before pushing.
>
> There were just a few too good optimizations in core type converter
> that I couldn't let go without.
>
>
> On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> <[hidden email]> wrote:
> >
> > Thanks for the heads-up.
> >
> > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:
> >
> > > Hi
> > >
> > > There are a few things I am working on. I will let you know later
> > > today when its done and the code base should be ready for cutting the
> > > 3.1.0 release.
> > >
> > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> > > wrote:
> > > >
> > > > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > > > components later
> > > >
> > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> > > scritto:
> > > >
> > > > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > > > release? I still have to finish the aws2 components
> > > > >
> > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> > > scritto:
> > > > >
> > > > >> Hi
> > > > >>
> > > > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > > > >> etc which we did for 3.0.
> > > > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > > > >> to upgrade to 3.1.0.
> > > > >>
> > > > >> And then we can work on 3.2 and get it released within a couple of
> > > > >> months or so, eg to get innovation out quicker to the community.
> > > > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > > > >> sub projects and they all need to innovate, especially the first two.
> > > > >>
> > > > >>
> > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > >> <[hidden email]> wrote:
> > > > >> >
> > > > >> > I didn't read RC.. I'm getting old
> > > > >> >
> > > > >> > Inviato da Yahoo Mail su Android
> > > > >> >
> > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > [hidden email]>
> > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > > > >> release of 3.1.
> > > > >> >
> > > > >> > Sorry, I misunderstood
> > > > >> >
> > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > > > >> scritto:
> > > > >> >
> > > > >> > > Hi
> > > > >> > >
> > > > >> > > Oh sorry I think its actually better to get an RC cut this
> > > weekend.
> > > > >> > > The code is ready as-is.
> > > > >> > > Even though I found a little optimization I am currently working
> > > on.
> > > > >> > >
> > > > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> > > object
> > > > >> > > allocations".
> > > > >> > >
> > > > >> > > Gregor so if you can find time then let us know.
> > > > >> > >
> > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > [hidden email]>
> > > > >> > > wrote:
> > > > >> > > >
> > > > >> > > > Hello Gregor,
> > > > >> > > >
> > > > >> > > > There is still some work pending.
> > > > >> > > >
> > > > >> > > > Probably torwards the end of February.
> > > > >> > > >
> > > > >> > > > Thanks for your time
> > > > >> > > >
> > > > >> > > >
> > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > [hidden email]>
> > > > >> ha
> > > > >> > > > scritto:
> > > > >> > > >
> > > > >> > > > > Absolutely, should we cut an RC this weekend already?
> > > > >> > > > >
> > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > [hidden email]>
> > > > >> > > wrote:
> > > > >> > > > >
> > > > >> > > > > > Hi
> > > > >> > > > > >
> > > > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> > > for
> > > > >> both
> > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > >> > > > > >
> > > > >> > > > > > Gregor if you are listening, then can you let us know if you
> > > > >> have
> > > > >> > > time
> > > > >> > > > > > in the foreseeable future to built the release?
> > > > >> > > > > >
> > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > >> [hidden email]>
> > > > >> > > > > wrote:
> > > > >> > > > > > >
> > > > >> > > > > > > Hi
> > > > >> > > > > > >
> > > > >> > > > > > > Okay so things are going well.
> > > > >> > > > > > >
> > > > >> > > > > > > The examples has been migrated.
> > > > >> > > > > > > Spring Boot documentation is now online on the website.
> > > And
> > > > >> the
> > > > >> > > auto
> > > > >> > > > > > > configuration options is included in the component doc of
> > > > >> those
> > > > >> > > whom
> > > > >> > > > > > > support SB (see bottom).
> > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > >> > > > > > >
> > > > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > > > >> This
> > > > >> > > works
> > > > >> > > > > > > with JDK11.
> > > > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > >> > > > > > >
> > > > >> > > > > > > As this potentially is a hard issue to resolve, then we
> > > can
> > > > >> add
> > > > >> > > this
> > > > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > > > >> worst-case
> > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > >> > > > > > >
> > > > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> > > was
> > > > >> > > flaky.
> > > > >> > > > > > > The other test errors were also related to "port number in
> > > > >> use"
> > > > >> > > etc.
> > > > >> > > > > > >
> > > > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> > > security
> > > > >> > > > > > >
> > > > >> > > > > >
> > > > >> > > > >
> > > > >> > >
> > > > >>
> > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > >> > > > > > >
> > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > >> > > [hidden email]>
> > > > >> > > > > > wrote:
> > > > >> > > > > > > >
> > > > >> > > > > > > > Hi
> > > > >> > > > > > > >
> > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > >> > > > > > > >
> > > > >> > > > > > > > All the work with reflection vs source code generated
> > > > >> > > configurers has
> > > > >> > > > > > bene done.
> > > > >> > > > > > > > And also on the model with the property placeholders.
> > > Thats
> > > > >> a
> > > > >> > > great
> > > > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> > > map
> > > > >> > > object
> > > > >> > > > > > > > instance in memory (biggest object domination from Camel
> > > > >> > > according to
> > > > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > > > >> > > > > > > >
> > > > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > > > >> > > > > > > >
> > > > >> > > > > > > > The examples are currently being migrated and its
> > > removed
> > > > >> from
> > > > >> > > the
> > > > >> > > > > > main repo.
> > > > >> > > > > > > > Omar is working on this.
> > > > >> > > > > > > >
> > > > >> > > > > > > > The spring boot still has outstanding to have the docs
> > > and
> > > > >> its
> > > > >> > > > > website
> > > > >> > > > > > > > as part of the Camel website.
> > > > >> > > > > > > > Zoran will help with this.
> > > > >> > > > > > > >
> > > > >> > > > > > > > The etcd component has a wrong structure with
> > > > >> > > endpoints/components.
> > > > >> > > > > > > > I will look into this.
> > > > >> > > > > > > >
> > > > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> > > we
> > > > >> have
> > > > >> > > the
> > > > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> > > use it
> > > > >> as
> > > > >> > > > > > > > default.
> > > > >> > > > > > > > And if so remove snakeyaml.
> > > > >> > > > > > > >
> > > > >> > > > > > > > And then we need to fix test failures on CI on both
> > > JDK8 and
> > > > >> > > JDK11
> > > > >> > > > > > > >
> > > > >> > > > > > > > And I may add a few more optimizations.
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > > > >> > > [hidden email]>
> > > > >> > > > > > wrote:
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > Hi
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > I just wanted to start the process of getting closer
> > > to
> > > > >> Camel
> > > > >> > > 3.1
> > > > >> > > > > > release.
> > > > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> > > have
> > > > >> made
> > > > >> > > great
> > > > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> > > of
> > > > >> the
> > > > >> > > Camel
> > > > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> > > then
> > > > >> skip
> > > > >> > > 3.0
> > > > >> > > > > and
> > > > >> > > > > > > > > go straight to 3.1.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > I am working on some further optimizations in the core
> > > > >> for 3.1,
> > > > >> > > > > and I
> > > > >> > > > > > > > > hope to find time to share more details in a blog.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > However to get the other work (high level) done and
> > > ready
> > > > >> for
> > > > >> > > 3.1,
> > > > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > On top of my head we have to do
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > 1)
> > > > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> > > some
> > > > >> > > tools
> > > > >> > > > > that
> > > > >> > > > > > > > > update docs and generate component list) that needs
> > > to be
> > > > >> > > > > completed.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > 2)
> > > > >> > > > > > > > > Generate source code configurer for data formats and
> > > > >> languages
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > 3)
> > > > >> > > > > > > > > The component configuration fluent builder (would be
> > > nice)
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > 4)
> > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > 5)
> > > > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > > > >> > > parser/loader
> > > > >> > > > > (for
> > > > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > > > >> instead
> > > > >> > > of
> > > > >> > > > > > JAXB)
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > There are other things of course, but these are the
> > > > >> bigger high
> > > > >> > > > > level
> > > > >> > > > > > > > > things I could remember.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > The usual work with new components, examples, other
> > > > >> > > improvements is
> > > > >> > > > > > of
> > > > >> > > > > > > > > course also ongoing.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > Lets see if we can get this done and release Camel
> > > 3.1 in
> > > > >> > > February.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > --
> > > > >> > > > > > > > > Claus Ibsen
> > > > >> > > > > > > > > -----------------
> > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > >
> > > > >> > > > > > > > --
> > > > >> > > > > > > > Claus Ibsen
> > > > >> > > > > > > > -----------------
> > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >> > > > > > >
> > > > >> > > > > > >
> > > > >> > > > > > >
> > > > >> > > > > > > --
> > > > >> > > > > > > Claus Ibsen
> > > > >> > > > > > > -----------------
> > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >> > > > > >
> > > > >> > > > > >
> > > > >> > > > > >
> > > > >> > > > > > --
> > > > >> > > > > > Claus Ibsen
> > > > >> > > > > > -----------------
> > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >> > > > > >
> > > > >> > > > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > > --
> > > > >> > > Claus Ibsen
> > > > >> > > -----------------
> > > > >> > > http://davsclaus.com @davsclaus
> > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >> > >
> > > > >> >
> > > > >>
> > > > >>
> > > > >> --
> > > > >> Claus Ibsen
> > > > >> -----------------
> > > > >> http://davsclaus.com @davsclaus
> > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > >>
> > > > >
> > >
> > >
> > >
> > > --
> > > Claus Ibsen
> > > -----------------
> > > http://davsclaus.com @davsclaus
> > > Camel in Action 2: https://www.manning.com/ibsen2
> > >
>
>
>
> --
> Claus Ibsen
> -----------------
> http://davsclaus.com @davsclaus
> Camel in Action 2: https://www.manning.com/ibsen2



--
Claus Ibsen
-----------------
http://davsclaus.com @davsclaus
Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
Hi Everyone:

I've started validating the branch for a 3.1 release but I am getting
the following error when preparing the release:

[ERROR] Failed to execute goal
org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
(default-cli) on project camel: The version could not be updated:
${camel-bundle-plugin-version} -> [Help 1]
org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
execute goal org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
(default-cli) on project camel: The version could not be updated:
${camel-bundle-plugin-version}

I know there have been some changes around camel-bundle-plugin in
https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
I am not sure what is causing the issues yet.

Thanks,
Gregor

On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]> wrote:

>
> Hi
>
> Okay it should all be done now. The last bits at pushed and the code
> base is ready for the release.
> The RAT plugin has been run and fixed license issues and also CS
> should be fixed.
>
> On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]> wrote:
> >
> > Hi
> >
> > I am still working, running final set of tests before pushing.
> >
> > There were just a few too good optimizations in core type converter
> > that I couldn't let go without.
> >
> >
> > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > <[hidden email]> wrote:
> > >
> > > Thanks for the heads-up.
> > >
> > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:
> > >
> > > > Hi
> > > >
> > > > There are a few things I am working on. I will let you know later
> > > > today when its done and the code base should be ready for cutting the
> > > > 3.1.0 release.
> > > >
> > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> > > > wrote:
> > > > >
> > > > > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > > > > components later
> > > > >
> > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> > > > scritto:
> > > > >
> > > > > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > > > > release? I still have to finish the aws2 components
> > > > > >
> > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> > > > scritto:
> > > > > >
> > > > > >> Hi
> > > > > >>
> > > > > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > > > > >> etc which we did for 3.0.
> > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > > > > >> to upgrade to 3.1.0.
> > > > > >>
> > > > > >> And then we can work on 3.2 and get it released within a couple of
> > > > > >> months or so, eg to get innovation out quicker to the community.
> > > > > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > > > > >> sub projects and they all need to innovate, especially the first two.
> > > > > >>
> > > > > >>
> > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > >> <[hidden email]> wrote:
> > > > > >> >
> > > > > >> > I didn't read RC.. I'm getting old
> > > > > >> >
> > > > > >> > Inviato da Yahoo Mail su Android
> > > > > >> >
> > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > [hidden email]>
> > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > > > > >> release of 3.1.
> > > > > >> >
> > > > > >> > Sorry, I misunderstood
> > > > > >> >
> > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > > > > >> scritto:
> > > > > >> >
> > > > > >> > > Hi
> > > > > >> > >
> > > > > >> > > Oh sorry I think its actually better to get an RC cut this
> > > > weekend.
> > > > > >> > > The code is ready as-is.
> > > > > >> > > Even though I found a little optimization I am currently working
> > > > on.
> > > > > >> > >
> > > > > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> > > > object
> > > > > >> > > allocations".
> > > > > >> > >
> > > > > >> > > Gregor so if you can find time then let us know.
> > > > > >> > >
> > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > [hidden email]>
> > > > > >> > > wrote:
> > > > > >> > > >
> > > > > >> > > > Hello Gregor,
> > > > > >> > > >
> > > > > >> > > > There is still some work pending.
> > > > > >> > > >
> > > > > >> > > > Probably torwards the end of February.
> > > > > >> > > >
> > > > > >> > > > Thanks for your time
> > > > > >> > > >
> > > > > >> > > >
> > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > [hidden email]>
> > > > > >> ha
> > > > > >> > > > scritto:
> > > > > >> > > >
> > > > > >> > > > > Absolutely, should we cut an RC this weekend already?
> > > > > >> > > > >
> > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > [hidden email]>
> > > > > >> > > wrote:
> > > > > >> > > > >
> > > > > >> > > > > > Hi
> > > > > >> > > > > >
> > > > > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> > > > for
> > > > > >> both
> > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > >> > > > > >
> > > > > >> > > > > > Gregor if you are listening, then can you let us know if you
> > > > > >> have
> > > > > >> > > time
> > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > >> > > > > >
> > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > >> [hidden email]>
> > > > > >> > > > > wrote:
> > > > > >> > > > > > >
> > > > > >> > > > > > > Hi
> > > > > >> > > > > > >
> > > > > >> > > > > > > Okay so things are going well.
> > > > > >> > > > > > >
> > > > > >> > > > > > > The examples has been migrated.
> > > > > >> > > > > > > Spring Boot documentation is now online on the website.
> > > > And
> > > > > >> the
> > > > > >> > > auto
> > > > > >> > > > > > > configuration options is included in the component doc of
> > > > > >> those
> > > > > >> > > whom
> > > > > >> > > > > > > support SB (see bottom).
> > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > >> > > > > > >
> > > > > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > > > > >> This
> > > > > >> > > works
> > > > > >> > > > > > > with JDK11.
> > > > > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > >> > > > > > >
> > > > > >> > > > > > > As this potentially is a hard issue to resolve, then we
> > > > can
> > > > > >> add
> > > > > >> > > this
> > > > > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > > > > >> worst-case
> > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > >> > > > > > >
> > > > > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> > > > was
> > > > > >> > > flaky.
> > > > > >> > > > > > > The other test errors were also related to "port number in
> > > > > >> use"
> > > > > >> > > etc.
> > > > > >> > > > > > >
> > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> > > > security
> > > > > >> > > > > > >
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > >
> > > > > >>
> > > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > >> > > > > > >
> > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > >> > > [hidden email]>
> > > > > >> > > > > > wrote:
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > Hi
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > All the work with reflection vs source code generated
> > > > > >> > > configurers has
> > > > > >> > > > > > bene done.
> > > > > >> > > > > > > > And also on the model with the property placeholders.
> > > > Thats
> > > > > >> a
> > > > > >> > > great
> > > > > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> > > > map
> > > > > >> > > object
> > > > > >> > > > > > > > instance in memory (biggest object domination from Camel
> > > > > >> > > according to
> > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > The examples are currently being migrated and its
> > > > removed
> > > > > >> from
> > > > > >> > > the
> > > > > >> > > > > > main repo.
> > > > > >> > > > > > > > Omar is working on this.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > The spring boot still has outstanding to have the docs
> > > > and
> > > > > >> its
> > > > > >> > > > > website
> > > > > >> > > > > > > > as part of the Camel website.
> > > > > >> > > > > > > > Zoran will help with this.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > The etcd component has a wrong structure with
> > > > > >> > > endpoints/components.
> > > > > >> > > > > > > > I will look into this.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> > > > we
> > > > > >> have
> > > > > >> > > the
> > > > > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> > > > use it
> > > > > >> as
> > > > > >> > > > > > > > default.
> > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > And then we need to fix test failures on CI on both
> > > > JDK8 and
> > > > > >> > > JDK11
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > > > > >> > > [hidden email]>
> > > > > >> > > > > > wrote:
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > Hi
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > I just wanted to start the process of getting closer
> > > > to
> > > > > >> Camel
> > > > > >> > > 3.1
> > > > > >> > > > > > release.
> > > > > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> > > > have
> > > > > >> made
> > > > > >> > > great
> > > > > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> > > > of
> > > > > >> the
> > > > > >> > > Camel
> > > > > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> > > > then
> > > > > >> skip
> > > > > >> > > 3.0
> > > > > >> > > > > and
> > > > > >> > > > > > > > > go straight to 3.1.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > I am working on some further optimizations in the core
> > > > > >> for 3.1,
> > > > > >> > > > > and I
> > > > > >> > > > > > > > > hope to find time to share more details in a blog.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > However to get the other work (high level) done and
> > > > ready
> > > > > >> for
> > > > > >> > > 3.1,
> > > > > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > On top of my head we have to do
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > 1)
> > > > > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> > > > some
> > > > > >> > > tools
> > > > > >> > > > > that
> > > > > >> > > > > > > > > update docs and generate component list) that needs
> > > > to be
> > > > > >> > > > > completed.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > 2)
> > > > > >> > > > > > > > > Generate source code configurer for data formats and
> > > > > >> languages
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > 3)
> > > > > >> > > > > > > > > The component configuration fluent builder (would be
> > > > nice)
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > 4)
> > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > 5)
> > > > > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > > > > >> > > parser/loader
> > > > > >> > > > > (for
> > > > > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > > > > >> instead
> > > > > >> > > of
> > > > > >> > > > > > JAXB)
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > There are other things of course, but these are the
> > > > > >> bigger high
> > > > > >> > > > > level
> > > > > >> > > > > > > > > things I could remember.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > The usual work with new components, examples, other
> > > > > >> > > improvements is
> > > > > >> > > > > > of
> > > > > >> > > > > > > > > course also ongoing.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > Lets see if we can get this done and release Camel
> > > > 3.1 in
> > > > > >> > > February.
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > >
> > > > > >> > > > > > > > > --
> > > > > >> > > > > > > > > Claus Ibsen
> > > > > >> > > > > > > > > -----------------
> > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > >
> > > > > >> > > > > > > > --
> > > > > >> > > > > > > > Claus Ibsen
> > > > > >> > > > > > > > -----------------
> > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > >
> > > > > >> > > > > > > --
> > > > > >> > > > > > > Claus Ibsen
> > > > > >> > > > > > > -----------------
> > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > >
> > > > > >> > > > > > --
> > > > > >> > > > > > Claus Ibsen
> > > > > >> > > > > > -----------------
> > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >> > > > > >
> > > > > >> > > > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > --
> > > > > >> > > Claus Ibsen
> > > > > >> > > -----------------
> > > > > >> > > http://davsclaus.com @davsclaus
> > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >> > >
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >> --
> > > > > >> Claus Ibsen
> > > > > >> -----------------
> > > > > >> http://davsclaus.com @davsclaus
> > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >>
> > > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Claus Ibsen
> > > > -----------------
> > > > http://davsclaus.com @davsclaus
> > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >
> >
> >
> >
> > --
> > Claus Ibsen
> > -----------------
> > http://davsclaus.com @davsclaus
> > Camel in Action 2: https://www.manning.com/ibsen2
>
>
>
> --
> Claus Ibsen
> -----------------
> http://davsclaus.com @davsclaus
> Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Claus Ibsen-2
Hi Gregor

Thanks for starting the release.

Yeah doing a git grep on that placeholders shows that its never
assigned a version.
Since the plugin is part of the release, then it can maybe just be
${project.version} instead.

On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
<[hidden email]> wrote:

>
> Hi Everyone:
>
> I've started validating the branch for a 3.1 release but I am getting
> the following error when preparing the release:
>
> [ERROR] Failed to execute goal
> org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> (default-cli) on project camel: The version could not be updated:
> ${camel-bundle-plugin-version} -> [Help 1]
> org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> execute goal org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> (default-cli) on project camel: The version could not be updated:
> ${camel-bundle-plugin-version}
>
> I know there have been some changes around camel-bundle-plugin in
> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> I am not sure what is causing the issues yet.
>
> Thanks,
> Gregor
>
> On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]> wrote:
> >
> > Hi
> >
> > Okay it should all be done now. The last bits at pushed and the code
> > base is ready for the release.
> > The RAT plugin has been run and fixed license issues and also CS
> > should be fixed.
> >
> > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]> wrote:
> > >
> > > Hi
> > >
> > > I am still working, running final set of tests before pushing.
> > >
> > > There were just a few too good optimizations in core type converter
> > > that I couldn't let go without.
> > >
> > >
> > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > <[hidden email]> wrote:
> > > >
> > > > Thanks for the heads-up.
> > > >
> > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:
> > > >
> > > > > Hi
> > > > >
> > > > > There are a few things I am working on. I will let you know later
> > > > > today when its done and the code base should be ready for cutting the
> > > > > 3.1.0 release.
> > > > >
> > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> > > > > wrote:
> > > > > >
> > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > > > > > components later
> > > > > >
> > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> > > > > scritto:
> > > > > >
> > > > > > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > > > > > release? I still have to finish the aws2 components
> > > > > > >
> > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> > > > > scritto:
> > > > > > >
> > > > > > >> Hi
> > > > > > >>
> > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > > > > > >> etc which we did for 3.0.
> > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > > > > > >> to upgrade to 3.1.0.
> > > > > > >>
> > > > > > >> And then we can work on 3.2 and get it released within a couple of
> > > > > > >> months or so, eg to get innovation out quicker to the community.
> > > > > > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > > > > > >> sub projects and they all need to innovate, especially the first two.
> > > > > > >>
> > > > > > >>
> > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > >> <[hidden email]> wrote:
> > > > > > >> >
> > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > >> >
> > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > >> >
> > > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > [hidden email]>
> > > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > > > > > >> release of 3.1.
> > > > > > >> >
> > > > > > >> > Sorry, I misunderstood
> > > > > > >> >
> > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > > > > > >> scritto:
> > > > > > >> >
> > > > > > >> > > Hi
> > > > > > >> > >
> > > > > > >> > > Oh sorry I think its actually better to get an RC cut this
> > > > > weekend.
> > > > > > >> > > The code is ready as-is.
> > > > > > >> > > Even though I found a little optimization I am currently working
> > > > > on.
> > > > > > >> > >
> > > > > > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> > > > > object
> > > > > > >> > > allocations".
> > > > > > >> > >
> > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > >> > >
> > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > [hidden email]>
> > > > > > >> > > wrote:
> > > > > > >> > > >
> > > > > > >> > > > Hello Gregor,
> > > > > > >> > > >
> > > > > > >> > > > There is still some work pending.
> > > > > > >> > > >
> > > > > > >> > > > Probably torwards the end of February.
> > > > > > >> > > >
> > > > > > >> > > > Thanks for your time
> > > > > > >> > > >
> > > > > > >> > > >
> > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > [hidden email]>
> > > > > > >> ha
> > > > > > >> > > > scritto:
> > > > > > >> > > >
> > > > > > >> > > > > Absolutely, should we cut an RC this weekend already?
> > > > > > >> > > > >
> > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > [hidden email]>
> > > > > > >> > > wrote:
> > > > > > >> > > > >
> > > > > > >> > > > > > Hi
> > > > > > >> > > > > >
> > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> > > > > for
> > > > > > >> both
> > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > >> > > > > >
> > > > > > >> > > > > > Gregor if you are listening, then can you let us know if you
> > > > > > >> have
> > > > > > >> > > time
> > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > >> > > > > >
> > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > >> [hidden email]>
> > > > > > >> > > > > wrote:
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > Hi
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > Okay so things are going well.
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > The examples has been migrated.
> > > > > > >> > > > > > > Spring Boot documentation is now online on the website.
> > > > > And
> > > > > > >> the
> > > > > > >> > > auto
> > > > > > >> > > > > > > configuration options is included in the component doc of
> > > > > > >> those
> > > > > > >> > > whom
> > > > > > >> > > > > > > support SB (see bottom).
> > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > > > > > >> This
> > > > > > >> > > works
> > > > > > >> > > > > > > with JDK11.
> > > > > > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > As this potentially is a hard issue to resolve, then we
> > > > > can
> > > > > > >> add
> > > > > > >> > > this
> > > > > > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > > > > > >> worst-case
> > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> > > > > was
> > > > > > >> > > flaky.
> > > > > > >> > > > > > > The other test errors were also related to "port number in
> > > > > > >> use"
> > > > > > >> > > etc.
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> > > > > security
> > > > > > >> > > > > > >
> > > > > > >> > > > > >
> > > > > > >> > > > >
> > > > > > >> > >
> > > > > > >>
> > > > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > >> > > [hidden email]>
> > > > > > >> > > > > > wrote:
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > Hi
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > All the work with reflection vs source code generated
> > > > > > >> > > configurers has
> > > > > > >> > > > > > bene done.
> > > > > > >> > > > > > > > And also on the model with the property placeholders.
> > > > > Thats
> > > > > > >> a
> > > > > > >> > > great
> > > > > > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> > > > > map
> > > > > > >> > > object
> > > > > > >> > > > > > > > instance in memory (biggest object domination from Camel
> > > > > > >> > > according to
> > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > The examples are currently being migrated and its
> > > > > removed
> > > > > > >> from
> > > > > > >> > > the
> > > > > > >> > > > > > main repo.
> > > > > > >> > > > > > > > Omar is working on this.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > The spring boot still has outstanding to have the docs
> > > > > and
> > > > > > >> its
> > > > > > >> > > > > website
> > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > The etcd component has a wrong structure with
> > > > > > >> > > endpoints/components.
> > > > > > >> > > > > > > > I will look into this.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> > > > > we
> > > > > > >> have
> > > > > > >> > > the
> > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> > > > > use it
> > > > > > >> as
> > > > > > >> > > > > > > > default.
> > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > And then we need to fix test failures on CI on both
> > > > > JDK8 and
> > > > > > >> > > JDK11
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > > > > > >> > > [hidden email]>
> > > > > > >> > > > > > wrote:
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > Hi
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > I just wanted to start the process of getting closer
> > > > > to
> > > > > > >> Camel
> > > > > > >> > > 3.1
> > > > > > >> > > > > > release.
> > > > > > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> > > > > have
> > > > > > >> made
> > > > > > >> > > great
> > > > > > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> > > > > of
> > > > > > >> the
> > > > > > >> > > Camel
> > > > > > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> > > > > then
> > > > > > >> skip
> > > > > > >> > > 3.0
> > > > > > >> > > > > and
> > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > I am working on some further optimizations in the core
> > > > > > >> for 3.1,
> > > > > > >> > > > > and I
> > > > > > >> > > > > > > > > hope to find time to share more details in a blog.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > However to get the other work (high level) done and
> > > > > ready
> > > > > > >> for
> > > > > > >> > > 3.1,
> > > > > > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > 1)
> > > > > > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> > > > > some
> > > > > > >> > > tools
> > > > > > >> > > > > that
> > > > > > >> > > > > > > > > update docs and generate component list) that needs
> > > > > to be
> > > > > > >> > > > > completed.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > 2)
> > > > > > >> > > > > > > > > Generate source code configurer for data formats and
> > > > > > >> languages
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > 3)
> > > > > > >> > > > > > > > > The component configuration fluent builder (would be
> > > > > nice)
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > 4)
> > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > 5)
> > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > > > > > >> > > parser/loader
> > > > > > >> > > > > (for
> > > > > > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > > > > > >> instead
> > > > > > >> > > of
> > > > > > >> > > > > > JAXB)
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > There are other things of course, but these are the
> > > > > > >> bigger high
> > > > > > >> > > > > level
> > > > > > >> > > > > > > > > things I could remember.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > The usual work with new components, examples, other
> > > > > > >> > > improvements is
> > > > > > >> > > > > > of
> > > > > > >> > > > > > > > > course also ongoing.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > Lets see if we can get this done and release Camel
> > > > > 3.1 in
> > > > > > >> > > February.
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > >
> > > > > > >> > > > > > > > > --
> > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > >> > > > > > > > > -----------------
> > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > >
> > > > > > >> > > > > > > > --
> > > > > > >> > > > > > > > Claus Ibsen
> > > > > > >> > > > > > > > -----------------
> > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >> > > > > > >
> > > > > > >> > > > > > >
> > > > > > >> > > > > > >
> > > > > > >> > > > > > > --
> > > > > > >> > > > > > > Claus Ibsen
> > > > > > >> > > > > > > -----------------
> > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >> > > > > >
> > > > > > >> > > > > >
> > > > > > >> > > > > >
> > > > > > >> > > > > > --
> > > > > > >> > > > > > Claus Ibsen
> > > > > > >> > > > > > -----------------
> > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >> > > > > >
> > > > > > >> > > > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > >
> > > > > > >> > > --
> > > > > > >> > > Claus Ibsen
> > > > > > >> > > -----------------
> > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >> > >
> > > > > > >> >
> > > > > > >>
> > > > > > >>
> > > > > > >> --
> > > > > > >> Claus Ibsen
> > > > > > >> -----------------
> > > > > > >> http://davsclaus.com @davsclaus
> > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >>
> > > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Claus Ibsen
> > > > > -----------------
> > > > > http://davsclaus.com @davsclaus
> > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >
> > >
> > >
> > >
> > > --
> > > Claus Ibsen
> > > -----------------
> > > http://davsclaus.com @davsclaus
> > > Camel in Action 2: https://www.manning.com/ibsen2
> >
> >
> >
> > --
> > Claus Ibsen
> > -----------------
> > http://davsclaus.com @davsclaus
> > Camel in Action 2: https://www.manning.com/ibsen2



--
Claus Ibsen
-----------------
http://davsclaus.com @davsclaus
Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
Hi Claus,

There's an assignment in the parent/pom.xml already:

<camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>

(see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)

I am wondering why that isn't sufficient.

Thanks,
Gregor

On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:

>
> Hi Gregor
>
> Thanks for starting the release.
>
> Yeah doing a git grep on that placeholders shows that its never
> assigned a version.
> Since the plugin is part of the release, then it can maybe just be
> ${project.version} instead.
>
> On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> <[hidden email]> wrote:
> >
> > Hi Everyone:
> >
> > I've started validating the branch for a 3.1 release but I am getting
> > the following error when preparing the release:
> >
> > [ERROR] Failed to execute goal
> > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > (default-cli) on project camel: The version could not be updated:
> > ${camel-bundle-plugin-version} -> [Help 1]
> > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > execute goal org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > (default-cli) on project camel: The version could not be updated:
> > ${camel-bundle-plugin-version}
> >
> > I know there have been some changes around camel-bundle-plugin in
> > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > I am not sure what is causing the issues yet.
> >
> > Thanks,
> > Gregor
> >
> > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]> wrote:
> > >
> > > Hi
> > >
> > > Okay it should all be done now. The last bits at pushed and the code
> > > base is ready for the release.
> > > The RAT plugin has been run and fixed license issues and also CS
> > > should be fixed.
> > >
> > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]> wrote:
> > > >
> > > > Hi
> > > >
> > > > I am still working, running final set of tests before pushing.
> > > >
> > > > There were just a few too good optimizations in core type converter
> > > > that I couldn't let go without.
> > > >
> > > >
> > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > <[hidden email]> wrote:
> > > > >
> > > > > Thanks for the heads-up.
> > > > >
> > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <[hidden email]> wrote:
> > > > >
> > > > > > Hi
> > > > > >
> > > > > > There are a few things I am working on. I will let you know later
> > > > > > today when its done and the code base should be ready for cutting the
> > > > > > 3.1.0 release.
> > > > > >
> > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <[hidden email]>
> > > > > > wrote:
> > > > > > >
> > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other aws2
> > > > > > > components later
> > > > > > >
> > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <[hidden email]> ha
> > > > > > scritto:
> > > > > > >
> > > > > > > > So we want an RC right? So we are doing rc1? Or do we want a final
> > > > > > > > release? I still have to finish the aws2 components
> > > > > > > >
> > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <[hidden email]> ha
> > > > > > scritto:
> > > > > > > >
> > > > > > > >> Hi
> > > > > > > >>
> > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and not a RC1 RC2
> > > > > > > >> etc which we did for 3.0.
> > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and encourage users
> > > > > > > >> to upgrade to 3.1.0.
> > > > > > > >>
> > > > > > > >> And then we can work on 3.2 and get it released within a couple of
> > > > > > > >> months or so, eg to get innovation out quicker to the community.
> > > > > > > >> Especially now as we have kafka connectors, quarkus, spring boot as
> > > > > > > >> sub projects and they all need to innovate, especially the first two.
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > >> <[hidden email]> wrote:
> > > > > > > >> >
> > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > >> >
> > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > >> >
> > > > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > [hidden email]>
> > > > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought about the final
> > > > > > > >> release of 3.1.
> > > > > > > >> >
> > > > > > > >> > Sorry, I misunderstood
> > > > > > > >> >
> > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <[hidden email]> ha
> > > > > > > >> scritto:
> > > > > > > >> >
> > > > > > > >> > > Hi
> > > > > > > >> > >
> > > > > > > >> > > Oh sorry I think its actually better to get an RC cut this
> > > > > > weekend.
> > > > > > > >> > > The code is ready as-is.
> > > > > > > >> > > Even though I found a little optimization I am currently working
> > > > > > on.
> > > > > > > >> > >
> > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is "using too much
> > > > > > object
> > > > > > > >> > > allocations".
> > > > > > > >> > >
> > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > >> > >
> > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > [hidden email]>
> > > > > > > >> > > wrote:
> > > > > > > >> > > >
> > > > > > > >> > > > Hello Gregor,
> > > > > > > >> > > >
> > > > > > > >> > > > There is still some work pending.
> > > > > > > >> > > >
> > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > >> > > >
> > > > > > > >> > > > Thanks for your time
> > > > > > > >> > > >
> > > > > > > >> > > >
> > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > [hidden email]>
> > > > > > > >> ha
> > > > > > > >> > > > scritto:
> > > > > > > >> > > >
> > > > > > > >> > > > > Absolutely, should we cut an RC this weekend already?
> > > > > > > >> > > > >
> > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > [hidden email]>
> > > > > > > >> > > wrote:
> > > > > > > >> > > > >
> > > > > > > >> > > > > > Hi
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it works now again
> > > > > > for
> > > > > > > >> both
> > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > Gregor if you are listening, then can you let us know if you
> > > > > > > >> have
> > > > > > > >> > > time
> > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > >> [hidden email]>
> > > > > > > >> > > > > wrote:
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > Hi
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > >> > > > > > > Spring Boot documentation is now online on the website.
> > > > > > And
> > > > > > > >> the
> > > > > > > >> > > auto
> > > > > > > >> > > > > > > configuration options is included in the component doc of
> > > > > > > >> those
> > > > > > > >> > > whom
> > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > There is one issue with OSGi blueprint on Karaf with JDK8.
> > > > > > > >> This
> > > > > > > >> > > works
> > > > > > > >> > > > > > > with JDK11.
> > > > > > > >> > > > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > As this potentially is a hard issue to resolve, then we
> > > > > > can
> > > > > > > >> add
> > > > > > > >> > > this
> > > > > > > >> > > > > > > as a known issue, and see if we can fix it for 3.1.1, or
> > > > > > > >> worst-case
> > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test errors that
> > > > > > was
> > > > > > > >> > > flaky.
> > > > > > > >> > > > > > > The other test errors were also related to "port number in
> > > > > > > >> use"
> > > > > > > >> > > etc.
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related to SSL
> > > > > > security
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > >
> > > > > > > >> > > > >
> > > > > > > >> > >
> > > > > > > >>
> > > > > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > >> > > [hidden email]>
> > > > > > > >> > > > > > wrote:
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > Hi
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > All the work with reflection vs source code generated
> > > > > > > >> > > configurers has
> > > > > > > >> > > > > > bene done.
> > > > > > > >> > > > > > > > And also on the model with the property placeholders.
> > > > > > Thats
> > > > > > > >> a
> > > > > > > >> > > great
> > > > > > > >> > > > > > > > win as we avoid loading 200 classes and have about 90kb
> > > > > > map
> > > > > > > >> > > object
> > > > > > > >> > > > > > > > instance in memory (biggest object domination from Camel
> > > > > > > >> > > according to
> > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext again ;)
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > The OSGi blueprint issue has also been fixed.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > The examples are currently being migrated and its
> > > > > > removed
> > > > > > > >> from
> > > > > > > >> > > the
> > > > > > > >> > > > > > main repo.
> > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > The spring boot still has outstanding to have the docs
> > > > > > and
> > > > > > > >> its
> > > > > > > >> > > > > website
> > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > The etcd component has a wrong structure with
> > > > > > > >> > > endpoints/components.
> > > > > > > >> > > > > > > > I will look into this.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > The snakeyaml component needs to be deprecated, and if
> > > > > > we
> > > > > > > >> have
> > > > > > > >> > > the
> > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml dataformat and
> > > > > > use it
> > > > > > > >> as
> > > > > > > >> > > > > > > > default.
> > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > And then we need to fix test failures on CI on both
> > > > > > JDK8 and
> > > > > > > >> > > JDK11
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus Ibsen <
> > > > > > > >> > > [hidden email]>
> > > > > > > >> > > > > > wrote:
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > Hi
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > I just wanted to start the process of getting closer
> > > > > > to
> > > > > > > >> Camel
> > > > > > > >> > > 3.1
> > > > > > > >> > > > > > release.
> > > > > > > >> > > > > > > > > Despite 3.0 was released only a while back, then we
> > > > > > have
> > > > > > > >> made
> > > > > > > >> > > great
> > > > > > > >> > > > > > > > > progress on 3.1 that is important to get in the hands
> > > > > > of
> > > > > > > >> the
> > > > > > > >> > > Camel
> > > > > > > >> > > > > > > > > users. And for Camel users that migrate to 3.x can
> > > > > > then
> > > > > > > >> skip
> > > > > > > >> > > 3.0
> > > > > > > >> > > > > and
> > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > I am working on some further optimizations in the core
> > > > > > > >> for 3.1,
> > > > > > > >> > > > > and I
> > > > > > > >> > > > > > > > > hope to find time to share more details in a blog.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > However to get the other work (high level) done and
> > > > > > ready
> > > > > > > >> for
> > > > > > > >> > > 3.1,
> > > > > > > >> > > > > > > > > then lets discuss them here on the @dev mailing list.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > 1)
> > > > > > > >> > > > > > > > > Finish the separation of camel-spring-boot (there are
> > > > > > some
> > > > > > > >> > > tools
> > > > > > > >> > > > > that
> > > > > > > >> > > > > > > > > update docs and generate component list) that needs
> > > > > > to be
> > > > > > > >> > > > > completed.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > 2)
> > > > > > > >> > > > > > > > > Generate source code configurer for data formats and
> > > > > > > >> languages
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > 3)
> > > > > > > >> > > > > > > > > The component configuration fluent builder (would be
> > > > > > nice)
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > 4)
> > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > 5)
> > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight XML route
> > > > > > > >> > > parser/loader
> > > > > > > >> > > > > (for
> > > > > > > >> > > > > > > > > example auto discover on classpath the JAR and use it
> > > > > > > >> instead
> > > > > > > >> > > of
> > > > > > > >> > > > > > JAXB)
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > There are other things of course, but these are the
> > > > > > > >> bigger high
> > > > > > > >> > > > > level
> > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > The usual work with new components, examples, other
> > > > > > > >> > > improvements is
> > > > > > > >> > > > > > of
> > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > Lets see if we can get this done and release Camel
> > > > > > 3.1 in
> > > > > > > >> > > February.
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > >
> > > > > > > >> > > > > > > > > --
> > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > >> > > > > > > > > -----------------
> > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > >
> > > > > > > >> > > > > > > > --
> > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > >> > > > > > > > -----------------
> > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > >
> > > > > > > >> > > > > > > --
> > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > >> > > > > > > -----------------
> > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > >> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >> > > > > >
> > > > > > > >> > > > > >
> > > > > > > >> > > > > >
> > > > > > > >> > > > > > --
> > > > > > > >> > > > > > Claus Ibsen
> > > > > > > >> > > > > > -----------------
> > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >> > > > > >
> > > > > > > >> > > > >
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > > --
> > > > > > > >> > > Claus Ibsen
> > > > > > > >> > > -----------------
> > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> --
> > > > > > > >> Claus Ibsen
> > > > > > > >> -----------------
> > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >>
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Claus Ibsen
> > > > -----------------
> > > > http://davsclaus.com @davsclaus
> > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >
> > >
> > >
> > > --
> > > Claus Ibsen
> > > -----------------
> > > http://davsclaus.com @davsclaus
> > > Camel in Action 2: https://www.manning.com/ibsen2
>
>
>
> --
> Claus Ibsen
> -----------------
> http://davsclaus.com @davsclaus
> Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Andrea Cosentino-3
If you run help:effective-pom the version seems to be correct for it

<camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>

Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
[hidden email]> ha scritto:

> Hi Claus,
>
> There's an assignment in the parent/pom.xml already:
>
>
> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
>
> (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
>
> I am wondering why that isn't sufficient.
>
> Thanks,
> Gregor
>
> On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> >
> > Hi Gregor
> >
> > Thanks for starting the release.
> >
> > Yeah doing a git grep on that placeholders shows that its never
> > assigned a version.
> > Since the plugin is part of the release, then it can maybe just be
> > ${project.version} instead.
> >
> > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > <[hidden email]> wrote:
> > >
> > > Hi Everyone:
> > >
> > > I've started validating the branch for a 3.1 release but I am getting
> > > the following error when preparing the release:
> > >
> > > [ERROR] Failed to execute goal
> > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > (default-cli) on project camel: The version could not be updated:
> > > ${camel-bundle-plugin-version} -> [Help 1]
> > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > execute goal
> org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > (default-cli) on project camel: The version could not be updated:
> > > ${camel-bundle-plugin-version}
> > >
> > > I know there have been some changes around camel-bundle-plugin in
> > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > I am not sure what is causing the issues yet.
> > >
> > > Thanks,
> > > Gregor
> > >
> > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> wrote:
> > > >
> > > > Hi
> > > >
> > > > Okay it should all be done now. The last bits at pushed and the code
> > > > base is ready for the release.
> > > > The RAT plugin has been run and fixed license issues and also CS
> > > > should be fixed.
> > > >
> > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> wrote:
> > > > >
> > > > > Hi
> > > > >
> > > > > I am still working, running final set of tests before pushing.
> > > > >
> > > > > There were just a few too good optimizations in core type converter
> > > > > that I couldn't let go without.
> > > > >
> > > > >
> > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > <[hidden email]> wrote:
> > > > > >
> > > > > > Thanks for the heads-up.
> > > > > >
> > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> [hidden email]> wrote:
> > > > > >
> > > > > > > Hi
> > > > > > >
> > > > > > > There are a few things I am working on. I will let you know
> later
> > > > > > > today when its done and the code base should be ready for
> cutting the
> > > > > > > 3.1.0 release.
> > > > > > >
> > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> [hidden email]>
> > > > > > > wrote:
> > > > > > > >
> > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> aws2
> > > > > > > > components later
> > > > > > > >
> > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> [hidden email]> ha
> > > > > > > scritto:
> > > > > > > >
> > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> a final
> > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > >
> > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> [hidden email]> ha
> > > > > > > scritto:
> > > > > > > > >
> > > > > > > > >> Hi
> > > > > > > > >>
> > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> not a RC1 RC2
> > > > > > > > >> etc which we did for 3.0.
> > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> encourage users
> > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > >>
> > > > > > > > >> And then we can work on 3.2 and get it released within a
> couple of
> > > > > > > > >> months or so, eg to get innovation out quicker to the
> community.
> > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> spring boot as
> > > > > > > > >> sub projects and they all need to innovate, especially
> the first two.
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > >> >
> > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > >> >
> > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > >> >
> > > > > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > [hidden email]>
> > > > > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought
> about the final
> > > > > > > > >> release of 3.1.
> > > > > > > > >> >
> > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > >> >
> > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> [hidden email]> ha
> > > > > > > > >> scritto:
> > > > > > > > >> >
> > > > > > > > >> > > Hi
> > > > > > > > >> > >
> > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> this
> > > > > > > weekend.
> > > > > > > > >> > > The code is ready as-is.
> > > > > > > > >> > > Even though I found a little optimization I am
> currently working
> > > > > > > on.
> > > > > > > > >> > >
> > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> "using too much
> > > > > > > object
> > > > > > > > >> > > allocations".
> > > > > > > > >> > >
> > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > >> > >
> > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > [hidden email]>
> > > > > > > > >> > > wrote:
> > > > > > > > >> > > >
> > > > > > > > >> > > > Hello Gregor,
> > > > > > > > >> > > >
> > > > > > > > >> > > > There is still some work pending.
> > > > > > > > >> > > >
> > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > >> > > >
> > > > > > > > >> > > > Thanks for your time
> > > > > > > > >> > > >
> > > > > > > > >> > > >
> > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > [hidden email]>
> > > > > > > > >> ha
> > > > > > > > >> > > > scritto:
> > > > > > > > >> > > >
> > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> already?
> > > > > > > > >> > > > >
> > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > [hidden email]>
> > > > > > > > >> > > wrote:
> > > > > > > > >> > > > >
> > > > > > > > >> > > > > > Hi
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> works now again
> > > > > > > for
> > > > > > > > >> both
> > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> us know if you
> > > > > > > > >> have
> > > > > > > > >> > > time
> > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > >> [hidden email]>
> > > > > > > > >> > > > > wrote:
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > Hi
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> the website.
> > > > > > > And
> > > > > > > > >> the
> > > > > > > > >> > > auto
> > > > > > > > >> > > > > > > configuration options is included in the
> component doc of
> > > > > > > > >> those
> > > > > > > > >> > > whom
> > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> Karaf with JDK8.
> > > > > > > > >> This
> > > > > > > > >> > > works
> > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > >> > > > > > >
> https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > As this potentially is a hard issue to
> resolve, then we
> > > > > > > can
> > > > > > > > >> add
> > > > > > > > >> > > this
> > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> for 3.1.1, or
> > > > > > > > >> worst-case
> > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> errors that
> > > > > > > was
> > > > > > > > >> > > flaky.
> > > > > > > > >> > > > > > > The other test errors were also related to
> "port number in
> > > > > > > > >> use"
> > > > > > > > >> > > etc.
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> to SSL
> > > > > > > security
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > >
> > > > > > > > >> > >
> > > > > > > > >>
> > > > > > >
> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > >> > > [hidden email]>
> > > > > > > > >> > > > > > wrote:
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > Hi
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > All the work with reflection vs source code
> generated
> > > > > > > > >> > > configurers has
> > > > > > > > >> > > > > > bene done.
> > > > > > > > >> > > > > > > > And also on the model with the property
> placeholders.
> > > > > > > Thats
> > > > > > > > >> a
> > > > > > > > >> > > great
> > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> have about 90kb
> > > > > > > map
> > > > > > > > >> > > object
> > > > > > > > >> > > > > > > > instance in memory (biggest object
> domination from Camel
> > > > > > > > >> > > according to
> > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> again ;)
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> fixed.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > The examples are currently being migrated
> and its
> > > > > > > removed
> > > > > > > > >> from
> > > > > > > > >> > > the
> > > > > > > > >> > > > > > main repo.
> > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> have the docs
> > > > > > > and
> > > > > > > > >> its
> > > > > > > > >> > > > > website
> > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> with
> > > > > > > > >> > > endpoints/components.
> > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> deprecated, and if
> > > > > > > we
> > > > > > > > >> have
> > > > > > > > >> > > the
> > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> dataformat and
> > > > > > > use it
> > > > > > > > >> as
> > > > > > > > >> > > > > > > > default.
> > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> on both
> > > > > > > JDK8 and
> > > > > > > > >> > > JDK11
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> Ibsen <
> > > > > > > > >> > > [hidden email]>
> > > > > > > > >> > > > > > wrote:
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > Hi
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > I just wanted to start the process of
> getting closer
> > > > > > > to
> > > > > > > > >> Camel
> > > > > > > > >> > > 3.1
> > > > > > > > >> > > > > > release.
> > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> back, then we
> > > > > > > have
> > > > > > > > >> made
> > > > > > > > >> > > great
> > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> in the hands
> > > > > > > of
> > > > > > > > >> the
> > > > > > > > >> > > Camel
> > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> to 3.x can
> > > > > > > then
> > > > > > > > >> skip
> > > > > > > > >> > > 3.0
> > > > > > > > >> > > > > and
> > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > I am working on some further
> optimizations in the core
> > > > > > > > >> for 3.1,
> > > > > > > > >> > > > > and I
> > > > > > > > >> > > > > > > > > hope to find time to share more details
> in a blog.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > However to get the other work (high
> level) done and
> > > > > > > ready
> > > > > > > > >> for
> > > > > > > > >> > > 3.1,
> > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> mailing list.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > 1)
> > > > > > > > >> > > > > > > > > Finish the separation of
> camel-spring-boot (there are
> > > > > > > some
> > > > > > > > >> > > tools
> > > > > > > > >> > > > > that
> > > > > > > > >> > > > > > > > > update docs and generate component list)
> that needs
> > > > > > > to be
> > > > > > > > >> > > > > completed.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > 2)
> > > > > > > > >> > > > > > > > > Generate source code configurer for data
> formats and
> > > > > > > > >> languages
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > 3)
> > > > > > > > >> > > > > > > > > The component configuration fluent
> builder (would be
> > > > > > > nice)
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > 4)
> > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > 5)
> > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> XML route
> > > > > > > > >> > > parser/loader
> > > > > > > > >> > > > > (for
> > > > > > > > >> > > > > > > > > example auto discover on classpath the
> JAR and use it
> > > > > > > > >> instead
> > > > > > > > >> > > of
> > > > > > > > >> > > > > > JAXB)
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > There are other things of course, but
> these are the
> > > > > > > > >> bigger high
> > > > > > > > >> > > > > level
> > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > The usual work with new components,
> examples, other
> > > > > > > > >> > > improvements is
> > > > > > > > >> > > > > > of
> > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> release Camel
> > > > > > > 3.1 in
> > > > > > > > >> > > February.
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > >
> > > > > > > > >> > > > > > > > > --
> > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > >> > > > > > > > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > >
> > > > > > > > >> > > > > > > > --
> > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > >> > > > > > > > -----------------
> > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > >> > > > > > > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > >
> > > > > > > > >> > > > > > > --
> > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > >> > > > > > > -----------------
> > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > >> > > > > > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > > > --
> > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > >> > > > > > -----------------
> > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > >> > > > > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > > > > > > >> > > > > >
> > > > > > > > >> > > > >
> > > > > > > > >> > >
> > > > > > > > >> > >
> > > > > > > > >> > >
> > > > > > > > >> > > --
> > > > > > > > >> > > Claus Ibsen
> > > > > > > > >> > > -----------------
> > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > >> > >
> > > > > > > > >> >
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> --
> > > > > > > > >> Claus Ibsen
> > > > > > > > >> -----------------
> > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > >>
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Claus Ibsen
> > > > > > > -----------------
> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Claus Ibsen
> > > > > -----------------
> > > > > http://davsclaus.com @davsclaus
> > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >
> > > >
> > > >
> > > > --
> > > > Claus Ibsen
> > > > -----------------
> > > > http://davsclaus.com @davsclaus
> > > > Camel in Action 2: https://www.manning.com/ibsen2
> >
> >
> >
> > --
> > Claus Ibsen
> > -----------------
> > http://davsclaus.com @davsclaus
> > Camel in Action 2: https://www.manning.com/ibsen2
>
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
Yes, that's why I am not sure why the release plugin fails on it. I
believe this worked without issues before the refactoring for
CAMEL-14444 that added the version tags explicitly to every occurrence
where the camel-bundle-plugin is used.


On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]> wrote:

>
> If you run help:effective-pom the version seems to be correct for it
>
> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
>
> Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> [hidden email]> ha scritto:
>
> > Hi Claus,
> >
> > There's an assignment in the parent/pom.xml already:
> >
> >
> > <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> >
> > (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> >
> > I am wondering why that isn't sufficient.
> >
> > Thanks,
> > Gregor
> >
> > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> > >
> > > Hi Gregor
> > >
> > > Thanks for starting the release.
> > >
> > > Yeah doing a git grep on that placeholders shows that its never
> > > assigned a version.
> > > Since the plugin is part of the release, then it can maybe just be
> > > ${project.version} instead.
> > >
> > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > <[hidden email]> wrote:
> > > >
> > > > Hi Everyone:
> > > >
> > > > I've started validating the branch for a 3.1 release but I am getting
> > > > the following error when preparing the release:
> > > >
> > > > [ERROR] Failed to execute goal
> > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > (default-cli) on project camel: The version could not be updated:
> > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > > execute goal
> > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > (default-cli) on project camel: The version could not be updated:
> > > > ${camel-bundle-plugin-version}
> > > >
> > > > I know there have been some changes around camel-bundle-plugin in
> > > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > I am not sure what is causing the issues yet.
> > > >
> > > > Thanks,
> > > > Gregor
> > > >
> > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> > wrote:
> > > > >
> > > > > Hi
> > > > >
> > > > > Okay it should all be done now. The last bits at pushed and the code
> > > > > base is ready for the release.
> > > > > The RAT plugin has been run and fixed license issues and also CS
> > > > > should be fixed.
> > > > >
> > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> > wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > I am still working, running final set of tests before pushing.
> > > > > >
> > > > > > There were just a few too good optimizations in core type converter
> > > > > > that I couldn't let go without.
> > > > > >
> > > > > >
> > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > <[hidden email]> wrote:
> > > > > > >
> > > > > > > Thanks for the heads-up.
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > [hidden email]> wrote:
> > > > > > >
> > > > > > > > Hi
> > > > > > > >
> > > > > > > > There are a few things I am working on. I will let you know
> > later
> > > > > > > > today when its done and the code base should be ready for
> > cutting the
> > > > > > > > 3.1.0 release.
> > > > > > > >
> > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > [hidden email]>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> > aws2
> > > > > > > > > components later
> > > > > > > > >
> > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > [hidden email]> ha
> > > > > > > > scritto:
> > > > > > > > >
> > > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> > a final
> > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > >
> > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > [hidden email]> ha
> > > > > > > > scritto:
> > > > > > > > > >
> > > > > > > > > >> Hi
> > > > > > > > > >>
> > > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> > not a RC1 RC2
> > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> > encourage users
> > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > >>
> > > > > > > > > >> And then we can work on 3.2 and get it released within a
> > couple of
> > > > > > > > > >> months or so, eg to get innovation out quicker to the
> > community.
> > > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> > spring boot as
> > > > > > > > > >> sub projects and they all need to innovate, especially
> > the first two.
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > >> >
> > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > >> >
> > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > >> >
> > > > > > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > > [hidden email]>
> > > > > > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought
> > about the final
> > > > > > > > > >> release of 3.1.
> > > > > > > > > >> >
> > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > >> >
> > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > [hidden email]> ha
> > > > > > > > > >> scritto:
> > > > > > > > > >> >
> > > > > > > > > >> > > Hi
> > > > > > > > > >> > >
> > > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> > this
> > > > > > > > weekend.
> > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > >> > > Even though I found a little optimization I am
> > currently working
> > > > > > > > on.
> > > > > > > > > >> > >
> > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> > "using too much
> > > > > > > > object
> > > > > > > > > >> > > allocations".
> > > > > > > > > >> > >
> > > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > > >> > >
> > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > > [hidden email]>
> > > > > > > > > >> > > wrote:
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > >> > > >
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > [hidden email]>
> > > > > > > > > >> ha
> > > > > > > > > >> > > > scritto:
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> > already?
> > > > > > > > > >> > > > >
> > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > > [hidden email]>
> > > > > > > > > >> > > wrote:
> > > > > > > > > >> > > > >
> > > > > > > > > >> > > > > > Hi
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> > works now again
> > > > > > > > for
> > > > > > > > > >> both
> > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> > us know if you
> > > > > > > > > >> have
> > > > > > > > > >> > > time
> > > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > > >> [hidden email]>
> > > > > > > > > >> > > > > wrote:
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > Hi
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> > the website.
> > > > > > > > And
> > > > > > > > > >> the
> > > > > > > > > >> > > auto
> > > > > > > > > >> > > > > > > configuration options is included in the
> > component doc of
> > > > > > > > > >> those
> > > > > > > > > >> > > whom
> > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> > Karaf with JDK8.
> > > > > > > > > >> This
> > > > > > > > > >> > > works
> > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > >> > > > > > >
> > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > resolve, then we
> > > > > > > > can
> > > > > > > > > >> add
> > > > > > > > > >> > > this
> > > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> > for 3.1.1, or
> > > > > > > > > >> worst-case
> > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> > errors that
> > > > > > > > was
> > > > > > > > > >> > > flaky.
> > > > > > > > > >> > > > > > > The other test errors were also related to
> > "port number in
> > > > > > > > > >> use"
> > > > > > > > > >> > > etc.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> > to SSL
> > > > > > > > security
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > >
> > > > > > > > > >> > >
> > > > > > > > > >>
> > > > > > > >
> > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > > >> > > [hidden email]>
> > > > > > > > > >> > > > > > wrote:
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > All the work with reflection vs source code
> > generated
> > > > > > > > > >> > > configurers has
> > > > > > > > > >> > > > > > bene done.
> > > > > > > > > >> > > > > > > > And also on the model with the property
> > placeholders.
> > > > > > > > Thats
> > > > > > > > > >> a
> > > > > > > > > >> > > great
> > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> > have about 90kb
> > > > > > > > map
> > > > > > > > > >> > > object
> > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > domination from Camel
> > > > > > > > > >> > > according to
> > > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> > again ;)
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> > fixed.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The examples are currently being migrated
> > and its
> > > > > > > > removed
> > > > > > > > > >> from
> > > > > > > > > >> > > the
> > > > > > > > > >> > > > > > main repo.
> > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> > have the docs
> > > > > > > > and
> > > > > > > > > >> its
> > > > > > > > > >> > > > > website
> > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> > with
> > > > > > > > > >> > > endpoints/components.
> > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > deprecated, and if
> > > > > > > > we
> > > > > > > > > >> have
> > > > > > > > > >> > > the
> > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> > dataformat and
> > > > > > > > use it
> > > > > > > > > >> as
> > > > > > > > > >> > > > > > > > default.
> > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> > on both
> > > > > > > > JDK8 and
> > > > > > > > > >> > > JDK11
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> > Ibsen <
> > > > > > > > > >> > > [hidden email]>
> > > > > > > > > >> > > > > > wrote:
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > I just wanted to start the process of
> > getting closer
> > > > > > > > to
> > > > > > > > > >> Camel
> > > > > > > > > >> > > 3.1
> > > > > > > > > >> > > > > > release.
> > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> > back, then we
> > > > > > > > have
> > > > > > > > > >> made
> > > > > > > > > >> > > great
> > > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> > in the hands
> > > > > > > > of
> > > > > > > > > >> the
> > > > > > > > > >> > > Camel
> > > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> > to 3.x can
> > > > > > > > then
> > > > > > > > > >> skip
> > > > > > > > > >> > > 3.0
> > > > > > > > > >> > > > > and
> > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > I am working on some further
> > optimizations in the core
> > > > > > > > > >> for 3.1,
> > > > > > > > > >> > > > > and I
> > > > > > > > > >> > > > > > > > > hope to find time to share more details
> > in a blog.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > However to get the other work (high
> > level) done and
> > > > > > > > ready
> > > > > > > > > >> for
> > > > > > > > > >> > > 3.1,
> > > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> > mailing list.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > >> > > > > > > > > Finish the separation of
> > camel-spring-boot (there are
> > > > > > > > some
> > > > > > > > > >> > > tools
> > > > > > > > > >> > > > > that
> > > > > > > > > >> > > > > > > > > update docs and generate component list)
> > that needs
> > > > > > > > to be
> > > > > > > > > >> > > > > completed.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > >> > > > > > > > > Generate source code configurer for data
> > formats and
> > > > > > > > > >> languages
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > >> > > > > > > > > The component configuration fluent
> > builder (would be
> > > > > > > > nice)
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> > XML route
> > > > > > > > > >> > > parser/loader
> > > > > > > > > >> > > > > (for
> > > > > > > > > >> > > > > > > > > example auto discover on classpath the
> > JAR and use it
> > > > > > > > > >> instead
> > > > > > > > > >> > > of
> > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > There are other things of course, but
> > these are the
> > > > > > > > > >> bigger high
> > > > > > > > > >> > > > > level
> > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > The usual work with new components,
> > examples, other
> > > > > > > > > >> > > improvements is
> > > > > > > > > >> > > > > > of
> > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> > release Camel
> > > > > > > > 3.1 in
> > > > > > > > > >> > > February.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > --
> > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > --
> > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > --
> > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > --
> > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > -----------------
> > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > >
> > > > > > > > > >> > >
> > > > > > > > > >> > >
> > > > > > > > > >> > >
> > > > > > > > > >> > > --
> > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > >> > > -----------------
> > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > >> > >
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> --
> > > > > > > > > >> Claus Ibsen
> > > > > > > > > >> -----------------
> > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Claus Ibsen
> > > > > > > > -----------------
> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Claus Ibsen
> > > > > -----------------
> > > > > http://davsclaus.com @davsclaus
> > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >
> > >
> > >
> > > --
> > > Claus Ibsen
> > > -----------------
> > > http://davsclaus.com @davsclaus
> > > Camel in Action 2: https://www.manning.com/ibsen2
> >
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Andrea Cosentino-2
Were you able to workaround it for the moment?

--
Andrea Cosentino 
----------------------------------
Apache Camel PMC Chair
Apache Karaf Committer
Apache Servicemix PMC Member
Email: [hidden email]
Twitter: @oscerd2
Github: oscerd






On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <[hidden email]> wrote:





Yes, that's why I am not sure why the release plugin fails on it. I
believe this worked without issues before the refactoring for
CAMEL-14444 that added the version tags explicitly to every occurrence
where the camel-bundle-plugin is used.


On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]> wrote:

>
> If you run help:effective-pom the version seems to be correct for it
>
> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
>
> Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> [hidden email]> ha scritto:
>
> > Hi Claus,
> >
> > There's an assignment in the parent/pom.xml already:
> >
> >
> > <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> >
> > (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> >
> > I am wondering why that isn't sufficient.
> >
> > Thanks,
> > Gregor
> >
> > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> > >
> > > Hi Gregor
> > >
> > > Thanks for starting the release.
> > >
> > > Yeah doing a git grep on that placeholders shows that its never
> > > assigned a version.
> > > Since the plugin is part of the release, then it can maybe just be
> > > ${project.version} instead.
> > >
> > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > <[hidden email]> wrote:
> > > >
> > > > Hi Everyone:
> > > >
> > > > I've started validating the branch for a 3.1 release but I am getting
> > > > the following error when preparing the release:
> > > >
> > > > [ERROR] Failed to execute goal
> > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > (default-cli) on project camel: The version could not be updated:
> > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > > execute goal
> > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > (default-cli) on project camel: The version could not be updated:
> > > > ${camel-bundle-plugin-version}
> > > >
> > > > I know there have been some changes around camel-bundle-plugin in
> > > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > I am not sure what is causing the issues yet.
> > > >
> > > > Thanks,
> > > > Gregor
> > > >
> > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> > wrote:
> > > > >
> > > > > Hi
> > > > >
> > > > > Okay it should all be done now. The last bits at pushed and the code
> > > > > base is ready for the release.
> > > > > The RAT plugin has been run and fixed license issues and also CS
> > > > > should be fixed.
> > > > >
> > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> > wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > I am still working, running final set of tests before pushing.
> > > > > >
> > > > > > There were just a few too good optimizations in core type converter
> > > > > > that I couldn't let go without.
> > > > > >
> > > > > >
> > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > <[hidden email]> wrote:
> > > > > > >
> > > > > > > Thanks for the heads-up.
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > [hidden email]> wrote:
> > > > > > >
> > > > > > > > Hi
> > > > > > > >
> > > > > > > > There are a few things I am working on. I will let you know
> > later
> > > > > > > > today when its done and the code base should be ready for
> > cutting the
> > > > > > > > 3.1.0 release.
> > > > > > > >
> > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > [hidden email]>
> > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> > aws2
> > > > > > > > > components later
> > > > > > > > >
> > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > [hidden email]> ha
> > > > > > > > scritto:
> > > > > > > > >
> > > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> > a final
> > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > >
> > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > [hidden email]> ha
> > > > > > > > scritto:
> > > > > > > > > >
> > > > > > > > > >> Hi
> > > > > > > > > >>
> > > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> > not a RC1 RC2
> > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> > encourage users
> > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > >>
> > > > > > > > > >> And then we can work on 3.2 and get it released within a
> > couple of
> > > > > > > > > >> months or so, eg to get innovation out quicker to the
> > community.
> > > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> > spring boot as
> > > > > > > > > >> sub projects and they all need to innovate, especially
> > the first two.
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > >> >
> > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > >> >
> > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > >> >
> > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > > [hidden email]>
> > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I thought
> > about the final
> > > > > > > > > >> release of 3.1.
> > > > > > > > > >> >
> > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > >> >
> > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > [hidden email]> ha
> > > > > > > > > >> scritto:
> > > > > > > > > >> >
> > > > > > > > > >> > > Hi
> > > > > > > > > >> > >
> > > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> > this
> > > > > > > > weekend.
> > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > >> > > Even though I found a little optimization I am
> > currently working
> > > > > > > > on.
> > > > > > > > > >> > >
> > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> > "using too much
> > > > > > > > object
> > > > > > > > > >> > > allocations".
> > > > > > > > > >> > >
> > > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > > >> > >
> > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > > [hidden email]>
> > > > > > > > > >> > > wrote:
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > >> > > >
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > [hidden email]>
> > > > > > > > > >> ha
> > > > > > > > > >> > > > scritto:
> > > > > > > > > >> > > >
> > > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> > already?
> > > > > > > > > >> > > > >
> > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > > [hidden email]>
> > > > > > > > > >> > > wrote:
> > > > > > > > > >> > > > >
> > > > > > > > > >> > > > > > Hi
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> > works now again
> > > > > > > > for
> > > > > > > > > >> both
> > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> > us know if you
> > > > > > > > > >> have
> > > > > > > > > >> > > time
> > > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > > >> [hidden email]>
> > > > > > > > > >> > > > > wrote:
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > Hi
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> > the website.
> > > > > > > > And
> > > > > > > > > >> the
> > > > > > > > > >> > > auto
> > > > > > > > > >> > > > > > > configuration options is included in the
> > component doc of
> > > > > > > > > >> those
> > > > > > > > > >> > > whom
> > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> > Karaf with JDK8.
> > > > > > > > > >> This
> > > > > > > > > >> > > works
> > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > >> > > > > > >
> > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > resolve, then we
> > > > > > > > can
> > > > > > > > > >> add
> > > > > > > > > >> > > this
> > > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> > for 3.1.1, or
> > > > > > > > > >> worst-case
> > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> > errors that
> > > > > > > > was
> > > > > > > > > >> > > flaky.
> > > > > > > > > >> > > > > > > The other test errors were also related to
> > "port number in
> > > > > > > > > >> use"
> > > > > > > > > >> > > etc.
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> > to SSL
> > > > > > > > security
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > >
> > > > > > > > > >> > >
> > > > > > > > > >>
> > > > > > > >
> > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > > >> > > [hidden email]>
> > > > > > > > > >> > > > > > wrote:
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > All the work with reflection vs source code
> > generated
> > > > > > > > > >> > > configurers has
> > > > > > > > > >> > > > > > bene done.
> > > > > > > > > >> > > > > > > > And also on the model with the property
> > placeholders.
> > > > > > > > Thats
> > > > > > > > > >> a
> > > > > > > > > >> > > great
> > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> > have about 90kb
> > > > > > > > map
> > > > > > > > > >> > > object
> > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > domination from Camel
> > > > > > > > > >> > > according to
> > > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> > again ;)
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> > fixed.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The examples are currently being migrated
> > and its
> > > > > > > > removed
> > > > > > > > > >> from
> > > > > > > > > >> > > the
> > > > > > > > > >> > > > > > main repo.
> > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> > have the docs
> > > > > > > > and
> > > > > > > > > >> its
> > > > > > > > > >> > > > > website
> > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> > with
> > > > > > > > > >> > > endpoints/components.
> > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > deprecated, and if
> > > > > > > > we
> > > > > > > > > >> have
> > > > > > > > > >> > > the
> > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> > dataformat and
> > > > > > > > use it
> > > > > > > > > >> as
> > > > > > > > > >> > > > > > > > default.
> > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> > on both
> > > > > > > > JDK8 and
> > > > > > > > > >> > > JDK11
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> > Ibsen <
> > > > > > > > > >> > > [hidden email]>
> > > > > > > > > >> > > > > > wrote:
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > I just wanted to start the process of
> > getting closer
> > > > > > > > to
> > > > > > > > > >> Camel
> > > > > > > > > >> > > 3.1
> > > > > > > > > >> > > > > > release.
> > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> > back, then we
> > > > > > > > have
> > > > > > > > > >> made
> > > > > > > > > >> > > great
> > > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> > in the hands
> > > > > > > > of
> > > > > > > > > >> the
> > > > > > > > > >> > > Camel
> > > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> > to 3.x can
> > > > > > > > then
> > > > > > > > > >> skip
> > > > > > > > > >> > > 3.0
> > > > > > > > > >> > > > > and
> > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > I am working on some further
> > optimizations in the core
> > > > > > > > > >> for 3.1,
> > > > > > > > > >> > > > > and I
> > > > > > > > > >> > > > > > > > > hope to find time to share more details
> > in a blog.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > However to get the other work (high
> > level) done and
> > > > > > > > ready
> > > > > > > > > >> for
> > > > > > > > > >> > > 3.1,
> > > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> > mailing list.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > >> > > > > > > > > Finish the separation of
> > camel-spring-boot (there are
> > > > > > > > some
> > > > > > > > > >> > > tools
> > > > > > > > > >> > > > > that
> > > > > > > > > >> > > > > > > > > update docs and generate component list)
> > that needs
> > > > > > > > to be
> > > > > > > > > >> > > > > completed.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > >> > > > > > > > > Generate source code configurer for data
> > formats and
> > > > > > > > > >> languages
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > >> > > > > > > > > The component configuration fluent
> > builder (would be
> > > > > > > > nice)
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> > XML route
> > > > > > > > > >> > > parser/loader
> > > > > > > > > >> > > > > (for
> > > > > > > > > >> > > > > > > > > example auto discover on classpath the
> > JAR and use it
> > > > > > > > > >> instead
> > > > > > > > > >> > > of
> > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > There are other things of course, but
> > these are the
> > > > > > > > > >> bigger high
> > > > > > > > > >> > > > > level
> > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > The usual work with new components,
> > examples, other
> > > > > > > > > >> > > improvements is
> > > > > > > > > >> > > > > > of
> > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> > release Camel
> > > > > > > > 3.1 in
> > > > > > > > > >> > > February.
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > >
> > > > > > > > > >> > > > > > > > > --
> > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > >
> > > > > > > > > >> > > > > > > > --
> > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > >
> > > > > > > > > >> > > > > > > --
> > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > > > --
> > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > >> > > > > > -----------------
> > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > > > > Camel in Action 2:
> > https://www.manning.com/ibsen2
> > > > > > > > > >> > > > > >
> > > > > > > > > >> > > > >
> > > > > > > > > >> > >
> > > > > > > > > >> > >
> > > > > > > > > >> > >
> > > > > > > > > >> > > --
> > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > >> > > -----------------
> > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > >> > >
> > > > > > > > > >> >
> > > > > > > > > >>
> > > > > > > > > >>
> > > > > > > > > >> --
> > > > > > > > > >> Claus Ibsen
> > > > > > > > > >> -----------------
> > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > >>
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Claus Ibsen
> > > > > > > > -----------------
> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Claus Ibsen
> > > > > -----------------
> > > > > http://davsclaus.com @davsclaus
> > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >
> > >
> > >
> > > --
> > > Claus Ibsen
> > > -----------------
> > > http://davsclaus.com @davsclaus
> > > Camel in Action 2: https://www.manning.com/ibsen2
> >
Reply | Threaded
Open this post in threaded view
|

Re: Re: Closing Down on Apache Camel 3.1

Claus Ibsen-2
In reply to this post by Gregor Zurowski-2
On Mon, Feb 17, 2020 at 7:34 PM Gregor Zurowski
<[hidden email]> wrote:
>
> Yes, that's why I am not sure why the release plugin fails on it. I
> believe this worked without issues before the refactoring for
> CAMEL-14444 that added the version tags explicitly to every occurrence
> where the camel-bundle-plugin is used.
>

We can likely use ${project.version} where its used except for the
maven archetypes which I think are a bit "special".


>
> On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]> wrote:
> >
> > If you run help:effective-pom the version seems to be correct for it
> >
> > <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> >
> > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > [hidden email]> ha scritto:
> >
> > > Hi Claus,
> > >
> > > There's an assignment in the parent/pom.xml already:
> > >
> > >
> > > <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > >
> > > (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > >
> > > I am wondering why that isn't sufficient.
> > >
> > > Thanks,
> > > Gregor
> > >
> > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> > > >
> > > > Hi Gregor
> > > >
> > > > Thanks for starting the release.
> > > >
> > > > Yeah doing a git grep on that placeholders shows that its never
> > > > assigned a version.
> > > > Since the plugin is part of the release, then it can maybe just be
> > > > ${project.version} instead.
> > > >
> > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > > <[hidden email]> wrote:
> > > > >
> > > > > Hi Everyone:
> > > > >
> > > > > I've started validating the branch for a 3.1 release but I am getting
> > > > > the following error when preparing the release:
> > > > >
> > > > > [ERROR] Failed to execute goal
> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > (default-cli) on project camel: The version could not be updated:
> > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > > > execute goal
> > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > (default-cli) on project camel: The version could not be updated:
> > > > > ${camel-bundle-plugin-version}
> > > > >
> > > > > I know there have been some changes around camel-bundle-plugin in
> > > > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > > I am not sure what is causing the issues yet.
> > > > >
> > > > > Thanks,
> > > > > Gregor
> > > > >
> > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> > > wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > Okay it should all be done now. The last bits at pushed and the code
> > > > > > base is ready for the release.
> > > > > > The RAT plugin has been run and fixed license issues and also CS
> > > > > > should be fixed.
> > > > > >
> > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> > > wrote:
> > > > > > >
> > > > > > > Hi
> > > > > > >
> > > > > > > I am still working, running final set of tests before pushing.
> > > > > > >
> > > > > > > There were just a few too good optimizations in core type converter
> > > > > > > that I couldn't let go without.
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > > <[hidden email]> wrote:
> > > > > > > >
> > > > > > > > Thanks for the heads-up.
> > > > > > > >
> > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > [hidden email]> wrote:
> > > > > > > >
> > > > > > > > > Hi
> > > > > > > > >
> > > > > > > > > There are a few things I am working on. I will let you know
> > > later
> > > > > > > > > today when its done and the code base should be ready for
> > > cutting the
> > > > > > > > > 3.1.0 release.
> > > > > > > > >
> > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > > [hidden email]>
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> > > aws2
> > > > > > > > > > components later
> > > > > > > > > >
> > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > [hidden email]> ha
> > > > > > > > > scritto:
> > > > > > > > > >
> > > > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> > > a final
> > > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > > >
> > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > [hidden email]> ha
> > > > > > > > > scritto:
> > > > > > > > > > >
> > > > > > > > > > >> Hi
> > > > > > > > > > >>
> > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> > > not a RC1 RC2
> > > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> > > encourage users
> > > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > > >>
> > > > > > > > > > >> And then we can work on 3.2 and get it released within a
> > > couple of
> > > > > > > > > > >> months or so, eg to get innovation out quicker to the
> > > community.
> > > > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> > > spring boot as
> > > > > > > > > > >> sub projects and they all need to innovate, especially
> > > the first two.
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > > >> >
> > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > > >> >
> > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > > >> >
> > > > > > > > > > >> >   Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> ha scritto:   Ah yeah, an RC is super fine. I thought
> > > about the final
> > > > > > > > > > >> release of 3.1.
> > > > > > > > > > >> >
> > > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > > >> >
> > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > [hidden email]> ha
> > > > > > > > > > >> scritto:
> > > > > > > > > > >> >
> > > > > > > > > > >> > > Hi
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> > > this
> > > > > > > > > weekend.
> > > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > > >> > > Even though I found a little optimization I am
> > > currently working
> > > > > > > > > on.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> > > "using too much
> > > > > > > > > object
> > > > > > > > > > >> > > allocations".
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> > > wrote:
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> ha
> > > > > > > > > > >> > > > scritto:
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> > > already?
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> > > wrote:
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > > > > > Hi
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> > > works now again
> > > > > > > > > for
> > > > > > > > > > >> both
> > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> > > us know if you
> > > > > > > > > > >> have
> > > > > > > > > > >> > > time
> > > > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > > > >> [hidden email]>
> > > > > > > > > > >> > > > > wrote:
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > Hi
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> > > the website.
> > > > > > > > > And
> > > > > > > > > > >> the
> > > > > > > > > > >> > > auto
> > > > > > > > > > >> > > > > > > configuration options is included in the
> > > component doc of
> > > > > > > > > > >> those
> > > > > > > > > > >> > > whom
> > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> > > Karaf with JDK8.
> > > > > > > > > > >> This
> > > > > > > > > > >> > > works
> > > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > > >> > > > > > >
> > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > > resolve, then we
> > > > > > > > > can
> > > > > > > > > > >> add
> > > > > > > > > > >> > > this
> > > > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> > > for 3.1.1, or
> > > > > > > > > > >> worst-case
> > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> > > errors that
> > > > > > > > > was
> > > > > > > > > > >> > > flaky.
> > > > > > > > > > >> > > > > > > The other test errors were also related to
> > > "port number in
> > > > > > > > > > >> use"
> > > > > > > > > > >> > > etc.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> > > to SSL
> > > > > > > > > security
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > >
> > > > > > > > > > >>
> > > > > > > > >
> > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > All the work with reflection vs source code
> > > generated
> > > > > > > > > > >> > > configurers has
> > > > > > > > > > >> > > > > > bene done.
> > > > > > > > > > >> > > > > > > > And also on the model with the property
> > > placeholders.
> > > > > > > > > Thats
> > > > > > > > > > >> a
> > > > > > > > > > >> > > great
> > > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> > > have about 90kb
> > > > > > > > > map
> > > > > > > > > > >> > > object
> > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > > domination from Camel
> > > > > > > > > > >> > > according to
> > > > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> > > again ;)
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> > > fixed.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The examples are currently being migrated
> > > and its
> > > > > > > > > removed
> > > > > > > > > > >> from
> > > > > > > > > > >> > > the
> > > > > > > > > > >> > > > > > main repo.
> > > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> > > have the docs
> > > > > > > > > and
> > > > > > > > > > >> its
> > > > > > > > > > >> > > > > website
> > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> > > with
> > > > > > > > > > >> > > endpoints/components.
> > > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > > deprecated, and if
> > > > > > > > > we
> > > > > > > > > > >> have
> > > > > > > > > > >> > > the
> > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> > > dataformat and
> > > > > > > > > use it
> > > > > > > > > > >> as
> > > > > > > > > > >> > > > > > > > default.
> > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> > > on both
> > > > > > > > > JDK8 and
> > > > > > > > > > >> > > JDK11
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> > > Ibsen <
> > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > I just wanted to start the process of
> > > getting closer
> > > > > > > > > to
> > > > > > > > > > >> Camel
> > > > > > > > > > >> > > 3.1
> > > > > > > > > > >> > > > > > release.
> > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> > > back, then we
> > > > > > > > > have
> > > > > > > > > > >> made
> > > > > > > > > > >> > > great
> > > > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> > > in the hands
> > > > > > > > > of
> > > > > > > > > > >> the
> > > > > > > > > > >> > > Camel
> > > > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> > > to 3.x can
> > > > > > > > > then
> > > > > > > > > > >> skip
> > > > > > > > > > >> > > 3.0
> > > > > > > > > > >> > > > > and
> > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > I am working on some further
> > > optimizations in the core
> > > > > > > > > > >> for 3.1,
> > > > > > > > > > >> > > > > and I
> > > > > > > > > > >> > > > > > > > > hope to find time to share more details
> > > in a blog.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > However to get the other work (high
> > > level) done and
> > > > > > > > > ready
> > > > > > > > > > >> for
> > > > > > > > > > >> > > 3.1,
> > > > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> > > mailing list.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > > >> > > > > > > > > Finish the separation of
> > > camel-spring-boot (there are
> > > > > > > > > some
> > > > > > > > > > >> > > tools
> > > > > > > > > > >> > > > > that
> > > > > > > > > > >> > > > > > > > > update docs and generate component list)
> > > that needs
> > > > > > > > > to be
> > > > > > > > > > >> > > > > completed.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > > >> > > > > > > > > Generate source code configurer for data
> > > formats and
> > > > > > > > > > >> languages
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > > >> > > > > > > > > The component configuration fluent
> > > builder (would be
> > > > > > > > > nice)
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> > > XML route
> > > > > > > > > > >> > > parser/loader
> > > > > > > > > > >> > > > > (for
> > > > > > > > > > >> > > > > > > > > example auto discover on classpath the
> > > JAR and use it
> > > > > > > > > > >> instead
> > > > > > > > > > >> > > of
> > > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > There are other things of course, but
> > > these are the
> > > > > > > > > > >> bigger high
> > > > > > > > > > >> > > > > level
> > > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > The usual work with new components,
> > > examples, other
> > > > > > > > > > >> > > improvements is
> > > > > > > > > > >> > > > > > of
> > > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> > > release Camel
> > > > > > > > > 3.1 in
> > > > > > > > > > >> > > February.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > --
> > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > --
> > > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > --
> > > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > --
> > > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > -----------------
> > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > --
> > > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > > >> > > -----------------
> > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > >> > >
> > > > > > > > > > >> >
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> --
> > > > > > > > > > >> Claus Ibsen
> > > > > > > > > > >> -----------------
> > > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Claus Ibsen
> > > > > > > > > -----------------
> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Claus Ibsen
> > > > > > > -----------------
> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >
> > > >
> > > >
> > > > --
> > > > Claus Ibsen
> > > > -----------------
> > > > http://davsclaus.com @davsclaus
> > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >



--
Claus Ibsen
-----------------
http://davsclaus.com @davsclaus
Camel in Action 2: https://www.manning.com/ibsen2
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
In reply to this post by Andrea Cosentino-2
I am still working on it, and I believe I have found something to fix
it. I'll post an update shortly.

On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino


<[hidden email]> wrote:

>
> Were you able to workaround it for the moment?
>
> --
> Andrea Cosentino
> ----------------------------------
> Apache Camel PMC Chair
> Apache Karaf Committer
> Apache Servicemix PMC Member
> Email: [hidden email]
> Twitter: @oscerd2
> Github: oscerd
>
>
>
>
>
>
> On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <[hidden email]> wrote:
>
>
>
>
>
> Yes, that's why I am not sure why the release plugin fails on it. I
> believe this worked without issues before the refactoring for
> CAMEL-14444 that added the version tags explicitly to every occurrence
> where the camel-bundle-plugin is used.
>
>
> On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]> wrote:
> >
> > If you run help:effective-pom the version seems to be correct for it
> >
> > <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> >
> > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > [hidden email]> ha scritto:
> >
> > > Hi Claus,
> > >
> > > There's an assignment in the parent/pom.xml already:
> > >
> > >
> > > <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > >
> > > (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > >
> > > I am wondering why that isn't sufficient.
> > >
> > > Thanks,
> > > Gregor
> > >
> > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> > > >
> > > > Hi Gregor
> > > >
> > > > Thanks for starting the release.
> > > >
> > > > Yeah doing a git grep on that placeholders shows that its never
> > > > assigned a version.
> > > > Since the plugin is part of the release, then it can maybe just be
> > > > ${project.version} instead.
> > > >
> > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > > <[hidden email]> wrote:
> > > > >
> > > > > Hi Everyone:
> > > > >
> > > > > I've started validating the branch for a 3.1 release but I am getting
> > > > > the following error when preparing the release:
> > > > >
> > > > > [ERROR] Failed to execute goal
> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > (default-cli) on project camel: The version could not be updated:
> > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > > > execute goal
> > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > (default-cli) on project camel: The version could not be updated:
> > > > > ${camel-bundle-plugin-version}
> > > > >
> > > > > I know there have been some changes around camel-bundle-plugin in
> > > > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > > I am not sure what is causing the issues yet.
> > > > >
> > > > > Thanks,
> > > > > Gregor
> > > > >
> > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> > > wrote:
> > > > > >
> > > > > > Hi
> > > > > >
> > > > > > Okay it should all be done now. The last bits at pushed and the code
> > > > > > base is ready for the release.
> > > > > > The RAT plugin has been run and fixed license issues and also CS
> > > > > > should be fixed.
> > > > > >
> > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> > > wrote:
> > > > > > >
> > > > > > > Hi
> > > > > > >
> > > > > > > I am still working, running final set of tests before pushing.
> > > > > > >
> > > > > > > There were just a few too good optimizations in core type converter
> > > > > > > that I couldn't let go without.
> > > > > > >
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > > <[hidden email]> wrote:
> > > > > > > >
> > > > > > > > Thanks for the heads-up.
> > > > > > > >
> > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > [hidden email]> wrote:
> > > > > > > >
> > > > > > > > > Hi
> > > > > > > > >
> > > > > > > > > There are a few things I am working on. I will let you know
> > > later
> > > > > > > > > today when its done and the code base should be ready for
> > > cutting the
> > > > > > > > > 3.1.0 release.
> > > > > > > > >
> > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > > [hidden email]>
> > > > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> > > aws2
> > > > > > > > > > components later
> > > > > > > > > >
> > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > [hidden email]> ha
> > > > > > > > > scritto:
> > > > > > > > > >
> > > > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> > > a final
> > > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > > >
> > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > [hidden email]> ha
> > > > > > > > > scritto:
> > > > > > > > > > >
> > > > > > > > > > >> Hi
> > > > > > > > > > >>
> > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> > > not a RC1 RC2
> > > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> > > encourage users
> > > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > > >>
> > > > > > > > > > >> And then we can work on 3.2 and get it released within a
> > > couple of
> > > > > > > > > > >> months or so, eg to get innovation out quicker to the
> > > community.
> > > > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> > > spring boot as
> > > > > > > > > > >> sub projects and they all need to innovate, especially
> > > the first two.
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > > >> >
> > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > > >> >
> > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > > >> >
> > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I thought
> > > about the final
> > > > > > > > > > >> release of 3.1.
> > > > > > > > > > >> >
> > > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > > >> >
> > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > [hidden email]> ha
> > > > > > > > > > >> scritto:
> > > > > > > > > > >> >
> > > > > > > > > > >> > > Hi
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> > > this
> > > > > > > > > weekend.
> > > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > > >> > > Even though I found a little optimization I am
> > > currently working
> > > > > > > > > on.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> > > "using too much
> > > > > > > > > object
> > > > > > > > > > >> > > allocations".
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> > > wrote:
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> ha
> > > > > > > > > > >> > > > scritto:
> > > > > > > > > > >> > > >
> > > > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> > > already?
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > > > [hidden email]>
> > > > > > > > > > >> > > wrote:
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > > > > > Hi
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> > > works now again
> > > > > > > > > for
> > > > > > > > > > >> both
> > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> > > us know if you
> > > > > > > > > > >> have
> > > > > > > > > > >> > > time
> > > > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > > > >> [hidden email]>
> > > > > > > > > > >> > > > > wrote:
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > Hi
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> > > the website.
> > > > > > > > > And
> > > > > > > > > > >> the
> > > > > > > > > > >> > > auto
> > > > > > > > > > >> > > > > > > configuration options is included in the
> > > component doc of
> > > > > > > > > > >> those
> > > > > > > > > > >> > > whom
> > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> > > Karaf with JDK8.
> > > > > > > > > > >> This
> > > > > > > > > > >> > > works
> > > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > > >> > > > > > >
> > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > > resolve, then we
> > > > > > > > > can
> > > > > > > > > > >> add
> > > > > > > > > > >> > > this
> > > > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> > > for 3.1.1, or
> > > > > > > > > > >> worst-case
> > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> > > errors that
> > > > > > > > > was
> > > > > > > > > > >> > > flaky.
> > > > > > > > > > >> > > > > > > The other test errors were also related to
> > > "port number in
> > > > > > > > > > >> use"
> > > > > > > > > > >> > > etc.
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> > > to SSL
> > > > > > > > > security
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > >
> > > > > > > > > > >>
> > > > > > > > >
> > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > All the work with reflection vs source code
> > > generated
> > > > > > > > > > >> > > configurers has
> > > > > > > > > > >> > > > > > bene done.
> > > > > > > > > > >> > > > > > > > And also on the model with the property
> > > placeholders.
> > > > > > > > > Thats
> > > > > > > > > > >> a
> > > > > > > > > > >> > > great
> > > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> > > have about 90kb
> > > > > > > > > map
> > > > > > > > > > >> > > object
> > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > > domination from Camel
> > > > > > > > > > >> > > according to
> > > > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> > > again ;)
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> > > fixed.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The examples are currently being migrated
> > > and its
> > > > > > > > > removed
> > > > > > > > > > >> from
> > > > > > > > > > >> > > the
> > > > > > > > > > >> > > > > > main repo.
> > > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> > > have the docs
> > > > > > > > > and
> > > > > > > > > > >> its
> > > > > > > > > > >> > > > > website
> > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> > > with
> > > > > > > > > > >> > > endpoints/components.
> > > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > > deprecated, and if
> > > > > > > > > we
> > > > > > > > > > >> have
> > > > > > > > > > >> > > the
> > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> > > dataformat and
> > > > > > > > > use it
> > > > > > > > > > >> as
> > > > > > > > > > >> > > > > > > > default.
> > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> > > on both
> > > > > > > > > JDK8 and
> > > > > > > > > > >> > > JDK11
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> > > Ibsen <
> > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > I just wanted to start the process of
> > > getting closer
> > > > > > > > > to
> > > > > > > > > > >> Camel
> > > > > > > > > > >> > > 3.1
> > > > > > > > > > >> > > > > > release.
> > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> > > back, then we
> > > > > > > > > have
> > > > > > > > > > >> made
> > > > > > > > > > >> > > great
> > > > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> > > in the hands
> > > > > > > > > of
> > > > > > > > > > >> the
> > > > > > > > > > >> > > Camel
> > > > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> > > to 3.x can
> > > > > > > > > then
> > > > > > > > > > >> skip
> > > > > > > > > > >> > > 3.0
> > > > > > > > > > >> > > > > and
> > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > I am working on some further
> > > optimizations in the core
> > > > > > > > > > >> for 3.1,
> > > > > > > > > > >> > > > > and I
> > > > > > > > > > >> > > > > > > > > hope to find time to share more details
> > > in a blog.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > However to get the other work (high
> > > level) done and
> > > > > > > > > ready
> > > > > > > > > > >> for
> > > > > > > > > > >> > > 3.1,
> > > > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> > > mailing list.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > > >> > > > > > > > > Finish the separation of
> > > camel-spring-boot (there are
> > > > > > > > > some
> > > > > > > > > > >> > > tools
> > > > > > > > > > >> > > > > that
> > > > > > > > > > >> > > > > > > > > update docs and generate component list)
> > > that needs
> > > > > > > > > to be
> > > > > > > > > > >> > > > > completed.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > > >> > > > > > > > > Generate source code configurer for data
> > > formats and
> > > > > > > > > > >> languages
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > > >> > > > > > > > > The component configuration fluent
> > > builder (would be
> > > > > > > > > nice)
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> > > XML route
> > > > > > > > > > >> > > parser/loader
> > > > > > > > > > >> > > > > (for
> > > > > > > > > > >> > > > > > > > > example auto discover on classpath the
> > > JAR and use it
> > > > > > > > > > >> instead
> > > > > > > > > > >> > > of
> > > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > There are other things of course, but
> > > these are the
> > > > > > > > > > >> bigger high
> > > > > > > > > > >> > > > > level
> > > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > The usual work with new components,
> > > examples, other
> > > > > > > > > > >> > > improvements is
> > > > > > > > > > >> > > > > > of
> > > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> > > release Camel
> > > > > > > > > 3.1 in
> > > > > > > > > > >> > > February.
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > >> > > > > > > > > --
> > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > >
> > > > > > > > > > >> > > > > > > > --
> > > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > >
> > > > > > > > > > >> > > > > > > --
> > > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > > > --
> > > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > > >> > > > > > -----------------
> > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > > > > Camel in Action 2:
> > > https://www.manning.com/ibsen2
> > > > > > > > > > >> > > > > >
> > > > > > > > > > >> > > > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > --
> > > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > > >> > > -----------------
> > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > >> > >
> > > > > > > > > > >> >
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> --
> > > > > > > > > > >> Claus Ibsen
> > > > > > > > > > >> -----------------
> > > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Claus Ibsen
> > > > > > > > > -----------------
> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Claus Ibsen
> > > > > > > -----------------
> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >
> > > >
> > > >
> > > > --
> > > > Claus Ibsen
> > > > -----------------
> > > > http://davsclaus.com @davsclaus
> > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
I've managed to work around the described problem regarding
camel-bundle-plugin by removing all explicit "<version>" tags, but now
getting other problems:

===
[INFO] [ERROR] Failed to parse plugin descriptor for
org.apache.camel:camel-bundle-plugin:3.0.1
(/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
===

Any ideas?

Thanks,
Gregor

On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
<[hidden email]> wrote:

>
> I am still working on it, and I believe I have found something to fix
> it. I'll post an update shortly.
>
> On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
>
>
> <[hidden email]> wrote:
> >
> > Were you able to workaround it for the moment?
> >
> > --
> > Andrea Cosentino
> > ----------------------------------
> > Apache Camel PMC Chair
> > Apache Karaf Committer
> > Apache Servicemix PMC Member
> > Email: [hidden email]
> > Twitter: @oscerd2
> > Github: oscerd
> >
> >
> >
> >
> >
> >
> > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <[hidden email]> wrote:
> >
> >
> >
> >
> >
> > Yes, that's why I am not sure why the release plugin fails on it. I
> > believe this worked without issues before the refactoring for
> > CAMEL-14444 that added the version tags explicitly to every occurrence
> > where the camel-bundle-plugin is used.
> >
> >
> > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]> wrote:
> > >
> > > If you run help:effective-pom the version seems to be correct for it
> > >
> > > <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> > >
> > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > > [hidden email]> ha scritto:
> > >
> > > > Hi Claus,
> > > >
> > > > There's an assignment in the parent/pom.xml already:
> > > >
> > > >
> > > > <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > > >
> > > > (see https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > > >
> > > > I am wondering why that isn't sufficient.
> > > >
> > > > Thanks,
> > > > Gregor
> > > >
> > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]> wrote:
> > > > >
> > > > > Hi Gregor
> > > > >
> > > > > Thanks for starting the release.
> > > > >
> > > > > Yeah doing a git grep on that placeholders shows that its never
> > > > > assigned a version.
> > > > > Since the plugin is part of the release, then it can maybe just be
> > > > > ${project.version} instead.
> > > > >
> > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > > > <[hidden email]> wrote:
> > > > > >
> > > > > > Hi Everyone:
> > > > > >
> > > > > > I've started validating the branch for a 3.1 release but I am getting
> > > > > > the following error when preparing the release:
> > > > > >
> > > > > > [ERROR] Failed to execute goal
> > > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > > (default-cli) on project camel: The version could not be updated:
> > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed to
> > > > > > execute goal
> > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > > (default-cli) on project camel: The version could not be updated:
> > > > > > ${camel-bundle-plugin-version}
> > > > > >
> > > > > > I know there have been some changes around camel-bundle-plugin in
> > > > > > https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > > > I am not sure what is causing the issues yet.
> > > > > >
> > > > > > Thanks,
> > > > > > Gregor
> > > > > >
> > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <[hidden email]>
> > > > wrote:
> > > > > > >
> > > > > > > Hi
> > > > > > >
> > > > > > > Okay it should all be done now. The last bits at pushed and the code
> > > > > > > base is ready for the release.
> > > > > > > The RAT plugin has been run and fixed license issues and also CS
> > > > > > > should be fixed.
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <[hidden email]>
> > > > wrote:
> > > > > > > >
> > > > > > > > Hi
> > > > > > > >
> > > > > > > > I am still working, running final set of tests before pushing.
> > > > > > > >
> > > > > > > > There were just a few too good optimizations in core type converter
> > > > > > > > that I couldn't let go without.
> > > > > > > >
> > > > > > > >
> > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > > > <[hidden email]> wrote:
> > > > > > > > >
> > > > > > > > > Thanks for the heads-up.
> > > > > > > > >
> > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > > [hidden email]> wrote:
> > > > > > > > >
> > > > > > > > > > Hi
> > > > > > > > > >
> > > > > > > > > > There are a few things I am working on. I will let you know
> > > > later
> > > > > > > > > > today when its done and the code base should be ready for
> > > > cutting the
> > > > > > > > > > 3.1.0 release.
> > > > > > > > > >
> > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > > > [hidden email]>
> > > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add the other
> > > > aws2
> > > > > > > > > > > components later
> > > > > > > > > > >
> > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > > [hidden email]> ha
> > > > > > > > > > scritto:
> > > > > > > > > > >
> > > > > > > > > > > > So we want an RC right? So we are doing rc1? Or do we want
> > > > a final
> > > > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > > > >
> > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > > [hidden email]> ha
> > > > > > > > > > scritto:
> > > > > > > > > > > >
> > > > > > > > > > > >> Hi
> > > > > > > > > > > >>
> > > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg GA) and
> > > > not a RC1 RC2
> > > > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release and
> > > > encourage users
> > > > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > > > >>
> > > > > > > > > > > >> And then we can work on 3.2 and get it released within a
> > > > couple of
> > > > > > > > > > > >> months or so, eg to get innovation out quicker to the
> > > > community.
> > > > > > > > > > > >> Especially now as we have kafka connectors, quarkus,
> > > > spring boot as
> > > > > > > > > > > >> sub projects and they all need to innovate, especially
> > > > the first two.
> > > > > > > > > > > >>
> > > > > > > > > > > >>
> > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > > > >> >
> > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea Cosentino<
> > > > > > > > > > [hidden email]>
> > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I thought
> > > > about the final
> > > > > > > > > > > >> release of 3.1.
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > > [hidden email]> ha
> > > > > > > > > > > >> scritto:
> > > > > > > > > > > >> >
> > > > > > > > > > > >> > > Hi
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > Oh sorry I think its actually better to get an RC cut
> > > > this
> > > > > > > > > > weekend.
> > > > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > > > >> > > Even though I found a little optimization I am
> > > > currently working
> > > > > > > > > > on.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0 is
> > > > "using too much
> > > > > > > > > > object
> > > > > > > > > > > >> > > allocations".
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > Gregor so if you can find time then let us know.
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea Cosentino <
> > > > > > > > > > [hidden email]>
> > > > > > > > > > > >> > > wrote:
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > > > [hidden email]>
> > > > > > > > > > > >> ha
> > > > > > > > > > > >> > > > scritto:
> > > > > > > > > > > >> > > >
> > > > > > > > > > > >> > > > > Absolutely, should we cut an RC this weekend
> > > > already?
> > > > > > > > > > > >> > > > >
> > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen <
> > > > > > > > > > [hidden email]>
> > > > > > > > > > > >> > > wrote:
> > > > > > > > > > > >> > > > >
> > > > > > > > > > > >> > > > > > Hi
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been fixed, it
> > > > works now again
> > > > > > > > > > for
> > > > > > > > > > > >> both
> > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > > Gregor if you are listening, then can you let
> > > > us know if you
> > > > > > > > > > > >> have
> > > > > > > > > > > >> > > time
> > > > > > > > > > > >> > > > > > in the foreseeable future to built the release?
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus Ibsen <
> > > > > > > > > > > >> [hidden email]>
> > > > > > > > > > > >> > > > > wrote:
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > Hi
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > > > >> > > > > > > Spring Boot documentation is now online on
> > > > the website.
> > > > > > > > > > And
> > > > > > > > > > > >> the
> > > > > > > > > > > >> > > auto
> > > > > > > > > > > >> > > > > > > configuration options is included in the
> > > > component doc of
> > > > > > > > > > > >> those
> > > > > > > > > > > >> > > whom
> > > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also online.
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > There is one issue with OSGi blueprint on
> > > > Karaf with JDK8.
> > > > > > > > > > > >> This
> > > > > > > > > > > >> > > works
> > > > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > > > >> > > > > > >
> > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > > > resolve, then we
> > > > > > > > > > can
> > > > > > > > > > > >> add
> > > > > > > > > > > >> > > this
> > > > > > > > > > > >> > > > > > > as a known issue, and see if we can fix it
> > > > for 3.1.1, or
> > > > > > > > > > > >> worst-case
> > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > The CI server looks good. I fixed the ES test
> > > > errors that
> > > > > > > > > > was
> > > > > > > > > > > >> > > flaky.
> > > > > > > > > > > >> > > > > > > The other test errors were also related to
> > > > "port number in
> > > > > > > > > > > >> use"
> > > > > > > > > > > >> > > etc.
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors related
> > > > to SSL
> > > > > > > > > > security
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > >
> > > > > > > > > > > >> > >
> > > > > > > > > > > >>
> > > > > > > > > >
> > > > https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM Claus Ibsen <
> > > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > Oh we have even more awesome progress now.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > All the work with reflection vs source code
> > > > generated
> > > > > > > > > > > >> > > configurers has
> > > > > > > > > > > >> > > > > > bene done.
> > > > > > > > > > > >> > > > > > > > And also on the model with the property
> > > > placeholders.
> > > > > > > > > > Thats
> > > > > > > > > > > >> a
> > > > > > > > > > > >> > > great
> > > > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes and
> > > > have about 90kb
> > > > > > > > > > map
> > > > > > > > > > > >> > > object
> > > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > > > domination from Camel
> > > > > > > > > > > >> > > according to
> > > > > > > > > > > >> > > > > > > > the profiler. Now its DefaultCamelContext
> > > > again ;)
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also been
> > > > fixed.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > The examples are currently being migrated
> > > > and its
> > > > > > > > > > removed
> > > > > > > > > > > >> from
> > > > > > > > > > > >> > > the
> > > > > > > > > > > >> > > > > > main repo.
> > > > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > The spring boot still has outstanding to
> > > > have the docs
> > > > > > > > > > and
> > > > > > > > > > > >> its
> > > > > > > > > > > >> > > > > website
> > > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > The etcd component has a wrong structure
> > > > with
> > > > > > > > > > > >> > > endpoints/components.
> > > > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > > > deprecated, and if
> > > > > > > > > > we
> > > > > > > > > > > >> have
> > > > > > > > > > > >> > > the
> > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new yaml
> > > > dataformat and
> > > > > > > > > > use it
> > > > > > > > > > > >> as
> > > > > > > > > > > >> > > > > > > > default.
> > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > And then we need to fix test failures on CI
> > > > on both
> > > > > > > > > > JDK8 and
> > > > > > > > > > > >> > > JDK11
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > And I may add a few more optimizations.
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM Claus
> > > > Ibsen <
> > > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > I just wanted to start the process of
> > > > getting closer
> > > > > > > > > > to
> > > > > > > > > > > >> Camel
> > > > > > > > > > > >> > > 3.1
> > > > > > > > > > > >> > > > > > release.
> > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a while
> > > > back, then we
> > > > > > > > > > have
> > > > > > > > > > > >> made
> > > > > > > > > > > >> > > great
> > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is important to get
> > > > in the hands
> > > > > > > > > > of
> > > > > > > > > > > >> the
> > > > > > > > > > > >> > > Camel
> > > > > > > > > > > >> > > > > > > > > users. And for Camel users that migrate
> > > > to 3.x can
> > > > > > > > > > then
> > > > > > > > > > > >> skip
> > > > > > > > > > > >> > > 3.0
> > > > > > > > > > > >> > > > > and
> > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > I am working on some further
> > > > optimizations in the core
> > > > > > > > > > > >> for 3.1,
> > > > > > > > > > > >> > > > > and I
> > > > > > > > > > > >> > > > > > > > > hope to find time to share more details
> > > > in a blog.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > However to get the other work (high
> > > > level) done and
> > > > > > > > > > ready
> > > > > > > > > > > >> for
> > > > > > > > > > > >> > > 3.1,
> > > > > > > > > > > >> > > > > > > > > then lets discuss them here on the @dev
> > > > mailing list.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > > > >> > > > > > > > > Finish the separation of
> > > > camel-spring-boot (there are
> > > > > > > > > > some
> > > > > > > > > > > >> > > tools
> > > > > > > > > > > >> > > > > that
> > > > > > > > > > > >> > > > > > > > > update docs and generate component list)
> > > > that needs
> > > > > > > > > > to be
> > > > > > > > > > > >> > > > > completed.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > > > >> > > > > > > > > Generate source code configurer for data
> > > > formats and
> > > > > > > > > > > >> languages
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > > > >> > > > > > > > > The component configuration fluent
> > > > builder (would be
> > > > > > > > > > nice)
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new lightweight
> > > > XML route
> > > > > > > > > > > >> > > parser/loader
> > > > > > > > > > > >> > > > > (for
> > > > > > > > > > > >> > > > > > > > > example auto discover on classpath the
> > > > JAR and use it
> > > > > > > > > > > >> instead
> > > > > > > > > > > >> > > of
> > > > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > There are other things of course, but
> > > > these are the
> > > > > > > > > > > >> bigger high
> > > > > > > > > > > >> > > > > level
> > > > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > The usual work with new components,
> > > > examples, other
> > > > > > > > > > > >> > > improvements is
> > > > > > > > > > > >> > > > > > of
> > > > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > Lets see if we can get this done and
> > > > release Camel
> > > > > > > > > > 3.1 in
> > > > > > > > > > > >> > > February.
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > >> > > > > > > > > --
> > > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > > > https://www.manning.com/ibsen2
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > >> > > > > > > > --
> > > > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > > > https://www.manning.com/ibsen2
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > >> > > > > > > --
> > > > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > >> > > > > > > Camel in Action 2:
> > > > https://www.manning.com/ibsen2
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > > > --
> > > > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > > > >> > > > > > -----------------
> > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > >> > > > > > Camel in Action 2:
> > > > https://www.manning.com/ibsen2
> > > > > > > > > > > >> > > > > >
> > > > > > > > > > > >> > > > >
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> > > --
> > > > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > > > >> > > -----------------
> > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > > > >> > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > > >> > >
> > > > > > > > > > > >> >
> > > > > > > > > > > >>
> > > > > > > > > > > >>
> > > > > > > > > > > >> --
> > > > > > > > > > > >> Claus Ibsen
> > > > > > > > > > > >> -----------------
> > > > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > > >>
> > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Claus Ibsen
> > > > > > > > > > -----------------
> > > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Claus Ibsen
> > > > > > > > -----------------
> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > Claus Ibsen
> > > > > > > -----------------
> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Claus Ibsen
> > > > > -----------------
> > > > > http://davsclaus.com @davsclaus
> > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Andrea Cosentino-3
It shouldn't be 3.0.1

Il lun 17 feb 2020, 21:00 Gregor Zurowski <[hidden email]> ha
scritto:

> I've managed to work around the described problem regarding
> camel-bundle-plugin by removing all explicit "<version>" tags, but now
> getting other problems:
>
> ===
> [INFO] [ERROR] Failed to parse plugin descriptor for
> org.apache.camel:camel-bundle-plugin:3.0.1
>
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> ===
>
> Any ideas?
>
> Thanks,
> Gregor
>
> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
> <[hidden email]> wrote:
> >
> > I am still working on it, and I believe I have found something to fix
> > it. I'll post an update shortly.
> >
> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
> >
> >
> > <[hidden email]> wrote:
> > >
> > > Were you able to workaround it for the moment?
> > >
> > > --
> > > Andrea Cosentino
> > > ----------------------------------
> > > Apache Camel PMC Chair
> > > Apache Karaf Committer
> > > Apache Servicemix PMC Member
> > > Email: [hidden email]
> > > Twitter: @oscerd2
> > > Github: oscerd
> > >
> > >
> > >
> > >
> > >
> > >
> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <
> [hidden email]> wrote:
> > >
> > >
> > >
> > >
> > >
> > > Yes, that's why I am not sure why the release plugin fails on it. I
> > > believe this worked without issues before the refactoring for
> > > CAMEL-14444 that added the version tags explicitly to every occurrence
> > > where the camel-bundle-plugin is used.
> > >
> > >
> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]>
> wrote:
> > > >
> > > > If you run help:effective-pom the version seems to be correct for it
> > > >
> > > >
> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> > > >
> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > > > [hidden email]> ha scritto:
> > > >
> > > > > Hi Claus,
> > > > >
> > > > > There's an assignment in the parent/pom.xml already:
> > > > >
> > > > >
> > > > >
> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > > > >
> > > > > (see
> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > > > >
> > > > > I am wondering why that isn't sufficient.
> > > > >
> > > > > Thanks,
> > > > > Gregor
> > > > >
> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <[hidden email]>
> wrote:
> > > > > >
> > > > > > Hi Gregor
> > > > > >
> > > > > > Thanks for starting the release.
> > > > > >
> > > > > > Yeah doing a git grep on that placeholders shows that its never
> > > > > > assigned a version.
> > > > > > Since the plugin is part of the release, then it can maybe just
> be
> > > > > > ${project.version} instead.
> > > > > >
> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > > > > <[hidden email]> wrote:
> > > > > > >
> > > > > > > Hi Everyone:
> > > > > > >
> > > > > > > I've started validating the branch for a 3.1 release but I am
> getting
> > > > > > > the following error when preparing the release:
> > > > > > >
> > > > > > > [ERROR] Failed to execute goal
> > > > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > > > (default-cli) on project camel: The version could not be
> updated:
> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > > > > org.apache.maven.lifecycle.LifecycleExecutionException: Failed
> to
> > > > > > > execute goal
> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > > > > (default-cli) on project camel: The version could not be
> updated:
> > > > > > > ${camel-bundle-plugin-version}
> > > > > > >
> > > > > > > I know there have been some changes around camel-bundle-plugin
> in
> > > > > > >
> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > > > > > > I am not sure what is causing the issues yet.
> > > > > > >
> > > > > > > Thanks,
> > > > > > > Gregor
> > > > > > >
> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
> [hidden email]>
> > > > > wrote:
> > > > > > > >
> > > > > > > > Hi
> > > > > > > >
> > > > > > > > Okay it should all be done now. The last bits at pushed and
> the code
> > > > > > > > base is ready for the release.
> > > > > > > > The RAT plugin has been run and fixed license issues and
> also CS
> > > > > > > > should be fixed.
> > > > > > > >
> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
> [hidden email]>
> > > > > wrote:
> > > > > > > > >
> > > > > > > > > Hi
> > > > > > > > >
> > > > > > > > > I am still working, running final set of tests before
> pushing.
> > > > > > > > >
> > > > > > > > > There were just a few too good optimizations in core type
> converter
> > > > > > > > > that I couldn't let go without.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > > > > > > <[hidden email]> wrote:
> > > > > > > > > >
> > > > > > > > > > Thanks for the heads-up.
> > > > > > > > > >
> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > > > [hidden email]> wrote:
> > > > > > > > > >
> > > > > > > > > > > Hi
> > > > > > > > > > >
> > > > > > > > > > > There are a few things I am working on. I will let you
> know
> > > > > later
> > > > > > > > > > > today when its done and the code base should be ready
> for
> > > > > cutting the
> > > > > > > > > > > 3.1.0 release.
> > > > > > > > > > >
> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > > > > [hidden email]>
> > > > > > > > > > > wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add
> the other
> > > > > aws2
> > > > > > > > > > > > components later
> > > > > > > > > > > >
> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > > > [hidden email]> ha
> > > > > > > > > > > scritto:
> > > > > > > > > > > >
> > > > > > > > > > > > > So we want an RC right? So we are doing rc1? Or do
> we want
> > > > > a final
> > > > > > > > > > > > > release? I still have to finish the aws2 components
> > > > > > > > > > > > >
> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > > > [hidden email]> ha
> > > > > > > > > > > scritto:
> > > > > > > > > > > > >
> > > > > > > > > > > > >> Hi
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg
> GA) and
> > > > > not a RC1 RC2
> > > > > > > > > > > > >> etc which we did for 3.0.
> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch release
> and
> > > > > encourage users
> > > > > > > > > > > > >> to upgrade to 3.1.0.
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> And then we can work on 3.2 and get it released
> within a
> > > > > couple of
> > > > > > > > > > > > >> months or so, eg to get innovation out quicker to
> the
> > > > > community.
> > > > > > > > > > > > >> Especially now as we have kafka connectors,
> quarkus,
> > > > > spring boot as
> > > > > > > > > > > > >> sub projects and they all need to innovate,
> especially
> > > > > the first two.
> > > > > > > > > > > > >>
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > > > > > > > > > > > >> <[hidden email]> wrote:
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea
> Cosentino<
> > > > > > > > > > > [hidden email]>
> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I
> thought
> > > > > about the final
> > > > > > > > > > > > >> release of 3.1.
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > Sorry, I misunderstood
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > > > [hidden email]> ha
> > > > > > > > > > > > >> scritto:
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >> > > Hi
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > Oh sorry I think its actually better to get
> an RC cut
> > > > > this
> > > > > > > > > > > weekend.
> > > > > > > > > > > > >> > > The code is ready as-is.
> > > > > > > > > > > > >> > > Even though I found a little optimization I am
> > > > > currently working
> > > > > > > > > > > on.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0
> is
> > > > > "using too much
> > > > > > > > > > > object
> > > > > > > > > > > > >> > > allocations".
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > Gregor so if you can find time then let us
> know.
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea
> Cosentino <
> > > > > > > > > > > [hidden email]>
> > > > > > > > > > > > >> > > wrote:
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > Hello Gregor,
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > There is still some work pending.
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > Probably torwards the end of February.
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > Thanks for your time
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > > > > > > > > > > [hidden email]>
> > > > > > > > > > > > >> ha
> > > > > > > > > > > > >> > > > scritto:
> > > > > > > > > > > > >> > > >
> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC this
> weekend
> > > > > already?
> > > > > > > > > > > > >> > > > >
> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus Ibsen
> <
> > > > > > > > > > > [hidden email]>
> > > > > > > > > > > > >> > > wrote:
> > > > > > > > > > > > >> > > > >
> > > > > > > > > > > > >> > > > > > Hi
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been
> fixed, it
> > > > > works now again
> > > > > > > > > > > for
> > > > > > > > > > > > >> both
> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > > Gregor if you are listening, then can
> you let
> > > > > us know if you
> > > > > > > > > > > > >> have
> > > > > > > > > > > > >> > > time
> > > > > > > > > > > > >> > > > > > in the foreseeable future to built the
> release?
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus
> Ibsen <
> > > > > > > > > > > > >> [hidden email]>
> > > > > > > > > > > > >> > > > > wrote:
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > Hi
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > Okay so things are going well.
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > The examples has been migrated.
> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is now
> online on
> > > > > the website.
> > > > > > > > > > > And
> > > > > > > > > > > > >> the
> > > > > > > > > > > > >> > > auto
> > > > > > > > > > > > >> > > > > > > configuration options is included in
> the
> > > > > component doc of
> > > > > > > > > > > > >> those
> > > > > > > > > > > > >> > > whom
> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now also
> online.
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
> blueprint on
> > > > > Karaf with JDK8.
> > > > > > > > > > > > >> This
> > > > > > > > > > > > >> > > works
> > > > > > > > > > > > >> > > > > > > with JDK11.
> > > > > > > > > > > > >> > > > > > >
> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > As this potentially is a hard issue to
> > > > > resolve, then we
> > > > > > > > > > > can
> > > > > > > > > > > > >> add
> > > > > > > > > > > > >> > > this
> > > > > > > > > > > > >> > > > > > > as a known issue, and see if we can
> fix it
> > > > > for 3.1.1, or
> > > > > > > > > > > > >> worst-case
> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > The CI server looks good. I fixed the
> ES test
> > > > > errors that
> > > > > > > > > > > was
> > > > > > > > > > > > >> > > flaky.
> > > > > > > > > > > > >> > > > > > > The other test errors were also
> related to
> > > > > "port number in
> > > > > > > > > > > > >> use"
> > > > > > > > > > > > >> > > etc.
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test errors
> related
> > > > > to SSL
> > > > > > > > > > > security
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > >
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >>
> > > > > > > > > > >
> > > > >
> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM
> Claus Ibsen <
> > > > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > Hi
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > Oh we have even more awesome
> progress now.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > All the work with reflection vs
> source code
> > > > > generated
> > > > > > > > > > > > >> > > configurers has
> > > > > > > > > > > > >> > > > > > bene done.
> > > > > > > > > > > > >> > > > > > > > And also on the model with the
> property
> > > > > placeholders.
> > > > > > > > > > > Thats
> > > > > > > > > > > > >> a
> > > > > > > > > > > > >> > > great
> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200 classes
> and
> > > > > have about 90kb
> > > > > > > > > > > map
> > > > > > > > > > > > >> > > object
> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > > > > domination from Camel
> > > > > > > > > > > > >> > > according to
> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
> DefaultCamelContext
> > > > > again ;)
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also
> been
> > > > > fixed.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > The examples are currently being
> migrated
> > > > > and its
> > > > > > > > > > > removed
> > > > > > > > > > > > >> from
> > > > > > > > > > > > >> > > the
> > > > > > > > > > > > >> > > > > > main repo.
> > > > > > > > > > > > >> > > > > > > > Omar is working on this.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > The spring boot still has
> outstanding to
> > > > > have the docs
> > > > > > > > > > > and
> > > > > > > > > > > > >> its
> > > > > > > > > > > > >> > > > > website
> > > > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > The etcd component has a wrong
> structure
> > > > > with
> > > > > > > > > > > > >> > > endpoints/components.
> > > > > > > > > > > > >> > > > > > > > I will look into this.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > > > > deprecated, and if
> > > > > > > > > > > we
> > > > > > > > > > > > >> have
> > > > > > > > > > > > >> > > the
> > > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new
> yaml
> > > > > dataformat and
> > > > > > > > > > > use it
> > > > > > > > > > > > >> as
> > > > > > > > > > > > >> > > > > > > > default.
> > > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > And then we need to fix test
> failures on CI
> > > > > on both
> > > > > > > > > > > JDK8 and
> > > > > > > > > > > > >> > > JDK11
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > And I may add a few more
> optimizations.
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM
> Claus
> > > > > Ibsen <
> > > > > > > > > > > > >> > > [hidden email]>
> > > > > > > > > > > > >> > > > > > wrote:
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > Hi
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > I just wanted to start the
> process of
> > > > > getting closer
> > > > > > > > > > > to
> > > > > > > > > > > > >> Camel
> > > > > > > > > > > > >> > > 3.1
> > > > > > > > > > > > >> > > > > > release.
> > > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a
> while
> > > > > back, then we
> > > > > > > > > > > have
> > > > > > > > > > > > >> made
> > > > > > > > > > > > >> > > great
> > > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is important
> to get
> > > > > in the hands
> > > > > > > > > > > of
> > > > > > > > > > > > >> the
> > > > > > > > > > > > >> > > Camel
> > > > > > > > > > > > >> > > > > > > > > users. And for Camel users that
> migrate
> > > > > to 3.x can
> > > > > > > > > > > then
> > > > > > > > > > > > >> skip
> > > > > > > > > > > > >> > > 3.0
> > > > > > > > > > > > >> > > > > and
> > > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > I am working on some further
> > > > > optimizations in the core
> > > > > > > > > > > > >> for 3.1,
> > > > > > > > > > > > >> > > > > and I
> > > > > > > > > > > > >> > > > > > > > > hope to find time to share more
> details
> > > > > in a blog.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > However to get the other work
> (high
> > > > > level) done and
> > > > > > > > > > > ready
> > > > > > > > > > > > >> for
> > > > > > > > > > > > >> > > 3.1,
> > > > > > > > > > > > >> > > > > > > > > then lets discuss them here on
> the @dev
> > > > > mailing list.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > 1)
> > > > > > > > > > > > >> > > > > > > > > Finish the separation of
> > > > > camel-spring-boot (there are
> > > > > > > > > > > some
> > > > > > > > > > > > >> > > tools
> > > > > > > > > > > > >> > > > > that
> > > > > > > > > > > > >> > > > > > > > > update docs and generate
> component list)
> > > > > that needs
> > > > > > > > > > > to be
> > > > > > > > > > > > >> > > > > completed.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > 2)
> > > > > > > > > > > > >> > > > > > > > > Generate source code configurer
> for data
> > > > > formats and
> > > > > > > > > > > > >> languages
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > 3)
> > > > > > > > > > > > >> > > > > > > > > The component configuration fluent
> > > > > builder (would be
> > > > > > > > > > > nice)
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > 4)
> > > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > 5)
> > > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new
> lightweight
> > > > > XML route
> > > > > > > > > > > > >> > > parser/loader
> > > > > > > > > > > > >> > > > > (for
> > > > > > > > > > > > >> > > > > > > > > example auto discover on
> classpath the
> > > > > JAR and use it
> > > > > > > > > > > > >> instead
> > > > > > > > > > > > >> > > of
> > > > > > > > > > > > >> > > > > > JAXB)
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > There are other things of course,
> but
> > > > > these are the
> > > > > > > > > > > > >> bigger high
> > > > > > > > > > > > >> > > > > level
> > > > > > > > > > > > >> > > > > > > > > things I could remember.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > The usual work with new
> components,
> > > > > examples, other
> > > > > > > > > > > > >> > > improvements is
> > > > > > > > > > > > >> > > > > > of
> > > > > > > > > > > > >> > > > > > > > > course also ongoing.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > Lets see if we can get this done
> and
> > > > > release Camel
> > > > > > > > > > > 3.1 in
> > > > > > > > > > > > >> > > February.
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > >
> > > > > > > > > > > > >> > > > > > > > > --
> > > > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > > > > > > > > > > >> > > > > > > > > -----------------
> > > > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > > > > https://www.manning.com/ibsen2
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > >
> > > > > > > > > > > > >> > > > > > > > --
> > > > > > > > > > > > >> > > > > > > > Claus Ibsen
> > > > > > > > > > > > >> > > > > > > > -----------------
> > > > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > > > > https://www.manning.com/ibsen2
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > >
> > > > > > > > > > > > >> > > > > > > --
> > > > > > > > > > > > >> > > > > > > Claus Ibsen
> > > > > > > > > > > > >> > > > > > > -----------------
> > > > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> > > > > > > Camel in Action 2:
> > > > > https://www.manning.com/ibsen2
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > > > --
> > > > > > > > > > > > >> > > > > > Claus Ibsen
> > > > > > > > > > > > >> > > > > > -----------------
> > > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> > > > > > Camel in Action 2:
> > > > > https://www.manning.com/ibsen2
> > > > > > > > > > > > >> > > > > >
> > > > > > > > > > > > >> > > > >
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> > > --
> > > > > > > > > > > > >> > > Claus Ibsen
> > > > > > > > > > > > >> > > -----------------
> > > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > > > > > > > > > > >> > >
> > > > > > > > > > > > >> >
> > > > > > > > > > > > >>
> > > > > > > > > > > > >>
> > > > > > > > > > > > >> --
> > > > > > > > > > > > >> Claus Ibsen
> > > > > > > > > > > > >> -----------------
> > > > > > > > > > > > >> http://davsclaus.com @davsclaus
> > > > > > > > > > > > >> Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > > > >>
> > > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Claus Ibsen
> > > > > > > > > > > -----------------
> > > > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Claus Ibsen
> > > > > > > > > -----------------
> > > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Claus Ibsen
> > > > > > > > -----------------
> > > > > > > > http://davsclaus.com @davsclaus
> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Claus Ibsen
> > > > > > -----------------
> > > > > > http://davsclaus.com @davsclaus
> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > > >
>
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Andrea Cosentino-3
It should be the version you're releasing because is part of the 3.1 release

Il lun 17 feb 2020, 21:04 Andrea Cosentino <[hidden email]> ha scritto:

> It shouldn't be 3.0.1
>
> Il lun 17 feb 2020, 21:00 Gregor Zurowski <[hidden email]> ha
> scritto:
>
>> I've managed to work around the described problem regarding
>> camel-bundle-plugin by removing all explicit "<version>" tags, but now
>> getting other problems:
>>
>> ===
>> [INFO] [ERROR] Failed to parse plugin descriptor for
>> org.apache.camel:camel-bundle-plugin:3.0.1
>>
>> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
>> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
>> ===
>>
>> Any ideas?
>>
>> Thanks,
>> Gregor
>>
>> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
>> <[hidden email]> wrote:
>> >
>> > I am still working on it, and I believe I have found something to fix
>> > it. I'll post an update shortly.
>> >
>> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
>> >
>> >
>> > <[hidden email]> wrote:
>> > >
>> > > Were you able to workaround it for the moment?
>> > >
>> > > --
>> > > Andrea Cosentino
>> > > ----------------------------------
>> > > Apache Camel PMC Chair
>> > > Apache Karaf Committer
>> > > Apache Servicemix PMC Member
>> > > Email: [hidden email]
>> > > Twitter: @oscerd2
>> > > Github: oscerd
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <
>> [hidden email]> wrote:
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > Yes, that's why I am not sure why the release plugin fails on it. I
>> > > believe this worked without issues before the refactoring for
>> > > CAMEL-14444 that added the version tags explicitly to every occurrence
>> > > where the camel-bundle-plugin is used.
>> > >
>> > >
>> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]>
>> wrote:
>> > > >
>> > > > If you run help:effective-pom the version seems to be correct for it
>> > > >
>> > > >
>> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
>> > > >
>> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
>> > > > [hidden email]> ha scritto:
>> > > >
>> > > > > Hi Claus,
>> > > > >
>> > > > > There's an assignment in the parent/pom.xml already:
>> > > > >
>> > > > >
>> > > > >
>> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
>> > > > >
>> > > > > (see
>> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
>> > > > >
>> > > > > I am wondering why that isn't sufficient.
>> > > > >
>> > > > > Thanks,
>> > > > > Gregor
>> > > > >
>> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <
>> [hidden email]> wrote:
>> > > > > >
>> > > > > > Hi Gregor
>> > > > > >
>> > > > > > Thanks for starting the release.
>> > > > > >
>> > > > > > Yeah doing a git grep on that placeholders shows that its never
>> > > > > > assigned a version.
>> > > > > > Since the plugin is part of the release, then it can maybe just
>> be
>> > > > > > ${project.version} instead.
>> > > > > >
>> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
>> > > > > > <[hidden email]> wrote:
>> > > > > > >
>> > > > > > > Hi Everyone:
>> > > > > > >
>> > > > > > > I've started validating the branch for a 3.1 release but I am
>> getting
>> > > > > > > the following error when preparing the release:
>> > > > > > >
>> > > > > > > [ERROR] Failed to execute goal
>> > > > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
>> > > > > > > (default-cli) on project camel: The version could not be
>> updated:
>> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
>> > > > > > > org.apache.maven.lifecycle.LifecycleExecutionException:
>> Failed to
>> > > > > > > execute goal
>> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
>> > > > > > > (default-cli) on project camel: The version could not be
>> updated:
>> > > > > > > ${camel-bundle-plugin-version}
>> > > > > > >
>> > > > > > > I know there have been some changes around
>> camel-bundle-plugin in
>> > > > > > >
>> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
>> > > > > > > I am not sure what is causing the issues yet.
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > > Gregor
>> > > > > > >
>> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
>> [hidden email]>
>> > > > > wrote:
>> > > > > > > >
>> > > > > > > > Hi
>> > > > > > > >
>> > > > > > > > Okay it should all be done now. The last bits at pushed and
>> the code
>> > > > > > > > base is ready for the release.
>> > > > > > > > The RAT plugin has been run and fixed license issues and
>> also CS
>> > > > > > > > should be fixed.
>> > > > > > > >
>> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
>> [hidden email]>
>> > > > > wrote:
>> > > > > > > > >
>> > > > > > > > > Hi
>> > > > > > > > >
>> > > > > > > > > I am still working, running final set of tests before
>> pushing.
>> > > > > > > > >
>> > > > > > > > > There were just a few too good optimizations in core type
>> converter
>> > > > > > > > > that I couldn't let go without.
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
>> > > > > > > > > <[hidden email]> wrote:
>> > > > > > > > > >
>> > > > > > > > > > Thanks for the heads-up.
>> > > > > > > > > >
>> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
>> > > > > [hidden email]> wrote:
>> > > > > > > > > >
>> > > > > > > > > > > Hi
>> > > > > > > > > > >
>> > > > > > > > > > > There are a few things I am working on. I will let
>> you know
>> > > > > later
>> > > > > > > > > > > today when its done and the code base should be ready
>> for
>> > > > > cutting the
>> > > > > > > > > > > 3.1.0 release.
>> > > > > > > > > > >
>> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
>> > > > > [hidden email]>
>> > > > > > > > > > > wrote:
>> > > > > > > > > > > >
>> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add
>> the other
>> > > > > aws2
>> > > > > > > > > > > > components later
>> > > > > > > > > > > >
>> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
>> > > > > [hidden email]> ha
>> > > > > > > > > > > scritto:
>> > > > > > > > > > > >
>> > > > > > > > > > > > > So we want an RC right? So we are doing rc1? Or
>> do we want
>> > > > > a final
>> > > > > > > > > > > > > release? I still have to finish the aws2
>> components
>> > > > > > > > > > > > >
>> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
>> > > > > [hidden email]> ha
>> > > > > > > > > > > scritto:
>> > > > > > > > > > > > >
>> > > > > > > > > > > > >> Hi
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg
>> GA) and
>> > > > > not a RC1 RC2
>> > > > > > > > > > > > >> etc which we did for 3.0.
>> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch
>> release and
>> > > > > encourage users
>> > > > > > > > > > > > >> to upgrade to 3.1.0.
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >> And then we can work on 3.2 and get it released
>> within a
>> > > > > couple of
>> > > > > > > > > > > > >> months or so, eg to get innovation out quicker
>> to the
>> > > > > community.
>> > > > > > > > > > > > >> Especially now as we have kafka connectors,
>> quarkus,
>> > > > > spring boot as
>> > > > > > > > > > > > >> sub projects and they all need to innovate,
>> especially
>> > > > > the first two.
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
>> > > > > > > > > > > > >> <[hidden email]> wrote:
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea
>> Cosentino<
>> > > > > > > > > > > [hidden email]>
>> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I
>> thought
>> > > > > about the final
>> > > > > > > > > > > > >> release of 3.1.
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> > Sorry, I misunderstood
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
>> > > > > [hidden email]> ha
>> > > > > > > > > > > > >> scritto:
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >> > > Hi
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > > Oh sorry I think its actually better to get
>> an RC cut
>> > > > > this
>> > > > > > > > > > > weekend.
>> > > > > > > > > > > > >> > > The code is ready as-is.
>> > > > > > > > > > > > >> > > Even though I found a little optimization I
>> am
>> > > > > currently working
>> > > > > > > > > > > on.
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0
>> is
>> > > > > "using too much
>> > > > > > > > > > > object
>> > > > > > > > > > > > >> > > allocations".
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > > Gregor so if you can find time then let us
>> know.
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea
>> Cosentino <
>> > > > > > > > > > > [hidden email]>
>> > > > > > > > > > > > >> > > wrote:
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > Hello Gregor,
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > There is still some work pending.
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > Probably torwards the end of February.
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > Thanks for your time
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
>> > > > > > > > > > > [hidden email]>
>> > > > > > > > > > > > >> ha
>> > > > > > > > > > > > >> > > > scritto:
>> > > > > > > > > > > > >> > > >
>> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC this
>> weekend
>> > > > > already?
>> > > > > > > > > > > > >> > > > >
>> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus
>> Ibsen <
>> > > > > > > > > > > [hidden email]>
>> > > > > > > > > > > > >> > > wrote:
>> > > > > > > > > > > > >> > > > >
>> > > > > > > > > > > > >> > > > > > Hi
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been
>> fixed, it
>> > > > > works now again
>> > > > > > > > > > > for
>> > > > > > > > > > > > >> both
>> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > > Gregor if you are listening, then can
>> you let
>> > > > > us know if you
>> > > > > > > > > > > > >> have
>> > > > > > > > > > > > >> > > time
>> > > > > > > > > > > > >> > > > > > in the foreseeable future to built the
>> release?
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus
>> Ibsen <
>> > > > > > > > > > > > >> [hidden email]>
>> > > > > > > > > > > > >> > > > > wrote:
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > Hi
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > Okay so things are going well.
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > The examples has been migrated.
>> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is now
>> online on
>> > > > > the website.
>> > > > > > > > > > > And
>> > > > > > > > > > > > >> the
>> > > > > > > > > > > > >> > > auto
>> > > > > > > > > > > > >> > > > > > > configuration options is included in
>> the
>> > > > > component doc of
>> > > > > > > > > > > > >> those
>> > > > > > > > > > > > >> > > whom
>> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
>> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now
>> also online.
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
>> blueprint on
>> > > > > Karaf with JDK8.
>> > > > > > > > > > > > >> This
>> > > > > > > > > > > > >> > > works
>> > > > > > > > > > > > >> > > > > > > with JDK11.
>> > > > > > > > > > > > >> > > > > > >
>> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > As this potentially is a hard issue
>> to
>> > > > > resolve, then we
>> > > > > > > > > > > can
>> > > > > > > > > > > > >> add
>> > > > > > > > > > > > >> > > this
>> > > > > > > > > > > > >> > > > > > > as a known issue, and see if we can
>> fix it
>> > > > > for 3.1.1, or
>> > > > > > > > > > > > >> worst-case
>> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > The CI server looks good. I fixed
>> the ES test
>> > > > > errors that
>> > > > > > > > > > > was
>> > > > > > > > > > > > >> > > flaky.
>> > > > > > > > > > > > >> > > > > > > The other test errors were also
>> related to
>> > > > > "port number in
>> > > > > > > > > > > > >> use"
>> > > > > > > > > > > > >> > > etc.
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test
>> errors related
>> > > > > to SSL
>> > > > > > > > > > > security
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > >
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >>
>> > > > > > > > > > >
>> > > > >
>> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM
>> Claus Ibsen <
>> > > > > > > > > > > > >> > > [hidden email]>
>> > > > > > > > > > > > >> > > > > > wrote:
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > Hi
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > Oh we have even more awesome
>> progress now.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > All the work with reflection vs
>> source code
>> > > > > generated
>> > > > > > > > > > > > >> > > configurers has
>> > > > > > > > > > > > >> > > > > > bene done.
>> > > > > > > > > > > > >> > > > > > > > And also on the model with the
>> property
>> > > > > placeholders.
>> > > > > > > > > > > Thats
>> > > > > > > > > > > > >> a
>> > > > > > > > > > > > >> > > great
>> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200
>> classes and
>> > > > > have about 90kb
>> > > > > > > > > > > map
>> > > > > > > > > > > > >> > > object
>> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest object
>> > > > > domination from Camel
>> > > > > > > > > > > > >> > > according to
>> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
>> DefaultCamelContext
>> > > > > again ;)
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also
>> been
>> > > > > fixed.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > The examples are currently being
>> migrated
>> > > > > and its
>> > > > > > > > > > > removed
>> > > > > > > > > > > > >> from
>> > > > > > > > > > > > >> > > the
>> > > > > > > > > > > > >> > > > > > main repo.
>> > > > > > > > > > > > >> > > > > > > > Omar is working on this.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > The spring boot still has
>> outstanding to
>> > > > > have the docs
>> > > > > > > > > > > and
>> > > > > > > > > > > > >> its
>> > > > > > > > > > > > >> > > > > website
>> > > > > > > > > > > > >> > > > > > > > as part of the Camel website.
>> > > > > > > > > > > > >> > > > > > > > Zoran will help with this.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > The etcd component has a wrong
>> structure
>> > > > > with
>> > > > > > > > > > > > >> > > endpoints/components.
>> > > > > > > > > > > > >> > > > > > > > I will look into this.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
>> > > > > deprecated, and if
>> > > > > > > > > > > we
>> > > > > > > > > > > > >> have
>> > > > > > > > > > > > >> > > the
>> > > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new
>> yaml
>> > > > > dataformat and
>> > > > > > > > > > > use it
>> > > > > > > > > > > > >> as
>> > > > > > > > > > > > >> > > > > > > > default.
>> > > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > And then we need to fix test
>> failures on CI
>> > > > > on both
>> > > > > > > > > > > JDK8 and
>> > > > > > > > > > > > >> > > JDK11
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > And I may add a few more
>> optimizations.
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM
>> Claus
>> > > > > Ibsen <
>> > > > > > > > > > > > >> > > [hidden email]>
>> > > > > > > > > > > > >> > > > > > wrote:
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > Hi
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > I just wanted to start the
>> process of
>> > > > > getting closer
>> > > > > > > > > > > to
>> > > > > > > > > > > > >> Camel
>> > > > > > > > > > > > >> > > 3.1
>> > > > > > > > > > > > >> > > > > > release.
>> > > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a
>> while
>> > > > > back, then we
>> > > > > > > > > > > have
>> > > > > > > > > > > > >> made
>> > > > > > > > > > > > >> > > great
>> > > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is
>> important to get
>> > > > > in the hands
>> > > > > > > > > > > of
>> > > > > > > > > > > > >> the
>> > > > > > > > > > > > >> > > Camel
>> > > > > > > > > > > > >> > > > > > > > > users. And for Camel users that
>> migrate
>> > > > > to 3.x can
>> > > > > > > > > > > then
>> > > > > > > > > > > > >> skip
>> > > > > > > > > > > > >> > > 3.0
>> > > > > > > > > > > > >> > > > > and
>> > > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > I am working on some further
>> > > > > optimizations in the core
>> > > > > > > > > > > > >> for 3.1,
>> > > > > > > > > > > > >> > > > > and I
>> > > > > > > > > > > > >> > > > > > > > > hope to find time to share more
>> details
>> > > > > in a blog.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > However to get the other work
>> (high
>> > > > > level) done and
>> > > > > > > > > > > ready
>> > > > > > > > > > > > >> for
>> > > > > > > > > > > > >> > > 3.1,
>> > > > > > > > > > > > >> > > > > > > > > then lets discuss them here on
>> the @dev
>> > > > > mailing list.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > On top of my head we have to do
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > 1)
>> > > > > > > > > > > > >> > > > > > > > > Finish the separation of
>> > > > > camel-spring-boot (there are
>> > > > > > > > > > > some
>> > > > > > > > > > > > >> > > tools
>> > > > > > > > > > > > >> > > > > that
>> > > > > > > > > > > > >> > > > > > > > > update docs and generate
>> component list)
>> > > > > that needs
>> > > > > > > > > > > to be
>> > > > > > > > > > > > >> > > > > completed.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > 2)
>> > > > > > > > > > > > >> > > > > > > > > Generate source code configurer
>> for data
>> > > > > formats and
>> > > > > > > > > > > > >> languages
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > 3)
>> > > > > > > > > > > > >> > > > > > > > > The component configuration
>> fluent
>> > > > > builder (would be
>> > > > > > > > > > > nice)
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > 4)
>> > > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > 5)
>> > > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new
>> lightweight
>> > > > > XML route
>> > > > > > > > > > > > >> > > parser/loader
>> > > > > > > > > > > > >> > > > > (for
>> > > > > > > > > > > > >> > > > > > > > > example auto discover on
>> classpath the
>> > > > > JAR and use it
>> > > > > > > > > > > > >> instead
>> > > > > > > > > > > > >> > > of
>> > > > > > > > > > > > >> > > > > > JAXB)
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > There are other things of
>> course, but
>> > > > > these are the
>> > > > > > > > > > > > >> bigger high
>> > > > > > > > > > > > >> > > > > level
>> > > > > > > > > > > > >> > > > > > > > > things I could remember.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > The usual work with new
>> components,
>> > > > > examples, other
>> > > > > > > > > > > > >> > > improvements is
>> > > > > > > > > > > > >> > > > > > of
>> > > > > > > > > > > > >> > > > > > > > > course also ongoing.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > Lets see if we can get this done
>> and
>> > > > > release Camel
>> > > > > > > > > > > 3.1 in
>> > > > > > > > > > > > >> > > February.
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > > --
>> > > > > > > > > > > > >> > > > > > > > > Claus Ibsen
>> > > > > > > > > > > > >> > > > > > > > > -----------------
>> > > > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
>> > > > > https://www.manning.com/ibsen2
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > >
>> > > > > > > > > > > > >> > > > > > > > --
>> > > > > > > > > > > > >> > > > > > > > Claus Ibsen
>> > > > > > > > > > > > >> > > > > > > > -----------------
>> > > > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> > > > > > > > Camel in Action 2:
>> > > > > https://www.manning.com/ibsen2
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > >
>> > > > > > > > > > > > >> > > > > > > --
>> > > > > > > > > > > > >> > > > > > > Claus Ibsen
>> > > > > > > > > > > > >> > > > > > > -----------------
>> > > > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> > > > > > > Camel in Action 2:
>> > > > > https://www.manning.com/ibsen2
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > > > --
>> > > > > > > > > > > > >> > > > > > Claus Ibsen
>> > > > > > > > > > > > >> > > > > > -----------------
>> > > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> > > > > > Camel in Action 2:
>> > > > > https://www.manning.com/ibsen2
>> > > > > > > > > > > > >> > > > > >
>> > > > > > > > > > > > >> > > > >
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> > > --
>> > > > > > > > > > > > >> > > Claus Ibsen
>> > > > > > > > > > > > >> > > -----------------
>> > > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> > > Camel in Action 2:
>> https://www.manning.com/ibsen2
>> > > > > > > > > > > > >> > >
>> > > > > > > > > > > > >> >
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >> --
>> > > > > > > > > > > > >> Claus Ibsen
>> > > > > > > > > > > > >> -----------------
>> > > > > > > > > > > > >> http://davsclaus.com @davsclaus
>> > > > > > > > > > > > >> Camel in Action 2:
>> https://www.manning.com/ibsen2
>> > > > > > > > > > > > >>
>> > > > > > > > > > > > >
>> > > > > > > > > > >
>> > > > > > > > > > >
>> > > > > > > > > > >
>> > > > > > > > > > > --
>> > > > > > > > > > > Claus Ibsen
>> > > > > > > > > > > -----------------
>> > > > > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > > > > > > >
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > >
>> > > > > > > > > --
>> > > > > > > > > Claus Ibsen
>> > > > > > > > > -----------------
>> > > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > > > >
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Claus Ibsen
>> > > > > > > > -----------------
>> > > > > > > > http://davsclaus.com @davsclaus
>> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > --
>> > > > > > Claus Ibsen
>> > > > > > -----------------
>> > > > > > http://davsclaus.com @davsclaus
>> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
>> > > > >
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
I agree, but I received that message when building version 3.1.0:

[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [INFO] BUILD FAILURE
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [INFO] Total time:  01:18 min
[INFO] [INFO] Finished at: 2020-02-17T11:57:36-08:00
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [ERROR] Failed to parse plugin descriptor for
org.apache.camel:camel-bundle-plugin:3.0.1
(/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
[INFO] [ERROR]
[INFO] [ERROR] To see the full stack trace of the errors, re-run Maven
with the -e switch.
[INFO] [ERROR] Re-run Maven using the -X switch to enable full debug logging.
[INFO] [ERROR]
[INFO] [ERROR] For more information about the errors and possible
solutions, please read the following articles:
[INFO] [ERROR] [Help 1]
http://cwiki.apache.org/confluence/display/MAVEN/PluginDescriptorParsingException
[INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary for Camel 3.1.0-SNAPSHOT:
[...]

On Mon, Feb 17, 2020 at 9:05 PM Andrea Cosentino <[hidden email]> wrote:

>
> It should be the version you're releasing because is part of the 3.1 release
>
> Il lun 17 feb 2020, 21:04 Andrea Cosentino <[hidden email]> ha scritto:
>
> > It shouldn't be 3.0.1
> >
> > Il lun 17 feb 2020, 21:00 Gregor Zurowski <[hidden email]> ha
> > scritto:
> >
> >> I've managed to work around the described problem regarding
> >> camel-bundle-plugin by removing all explicit "<version>" tags, but now
> >> getting other problems:
> >>
> >> ===
> >> [INFO] [ERROR] Failed to parse plugin descriptor for
> >> org.apache.camel:camel-bundle-plugin:3.0.1
> >>
> >> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> >> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> >> ===
> >>
> >> Any ideas?
> >>
> >> Thanks,
> >> Gregor
> >>
> >> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
> >> <[hidden email]> wrote:
> >> >
> >> > I am still working on it, and I believe I have found something to fix
> >> > it. I'll post an update shortly.
> >> >
> >> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
> >> >
> >> >
> >> > <[hidden email]> wrote:
> >> > >
> >> > > Were you able to workaround it for the moment?
> >> > >
> >> > > --
> >> > > Andrea Cosentino
> >> > > ----------------------------------
> >> > > Apache Camel PMC Chair
> >> > > Apache Karaf Committer
> >> > > Apache Servicemix PMC Member
> >> > > Email: [hidden email]
> >> > > Twitter: @oscerd2
> >> > > Github: oscerd
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <
> >> [hidden email]> wrote:
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > Yes, that's why I am not sure why the release plugin fails on it. I
> >> > > believe this worked without issues before the refactoring for
> >> > > CAMEL-14444 that added the version tags explicitly to every occurrence
> >> > > where the camel-bundle-plugin is used.
> >> > >
> >> > >
> >> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]>
> >> wrote:
> >> > > >
> >> > > > If you run help:effective-pom the version seems to be correct for it
> >> > > >
> >> > > >
> >> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> >> > > >
> >> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> >> > > > [hidden email]> ha scritto:
> >> > > >
> >> > > > > Hi Claus,
> >> > > > >
> >> > > > > There's an assignment in the parent/pom.xml already:
> >> > > > >
> >> > > > >
> >> > > > >
> >> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> >> > > > >
> >> > > > > (see
> >> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> >> > > > >
> >> > > > > I am wondering why that isn't sufficient.
> >> > > > >
> >> > > > > Thanks,
> >> > > > > Gregor
> >> > > > >
> >> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <
> >> [hidden email]> wrote:
> >> > > > > >
> >> > > > > > Hi Gregor
> >> > > > > >
> >> > > > > > Thanks for starting the release.
> >> > > > > >
> >> > > > > > Yeah doing a git grep on that placeholders shows that its never
> >> > > > > > assigned a version.
> >> > > > > > Since the plugin is part of the release, then it can maybe just
> >> be
> >> > > > > > ${project.version} instead.
> >> > > > > >
> >> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> >> > > > > > <[hidden email]> wrote:
> >> > > > > > >
> >> > > > > > > Hi Everyone:
> >> > > > > > >
> >> > > > > > > I've started validating the branch for a 3.1 release but I am
> >> getting
> >> > > > > > > the following error when preparing the release:
> >> > > > > > >
> >> > > > > > > [ERROR] Failed to execute goal
> >> > > > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> >> > > > > > > (default-cli) on project camel: The version could not be
> >> updated:
> >> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> >> > > > > > > org.apache.maven.lifecycle.LifecycleExecutionException:
> >> Failed to
> >> > > > > > > execute goal
> >> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> >> > > > > > > (default-cli) on project camel: The version could not be
> >> updated:
> >> > > > > > > ${camel-bundle-plugin-version}
> >> > > > > > >
> >> > > > > > > I know there have been some changes around
> >> camel-bundle-plugin in
> >> > > > > > >
> >> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> >> > > > > > > I am not sure what is causing the issues yet.
> >> > > > > > >
> >> > > > > > > Thanks,
> >> > > > > > > Gregor
> >> > > > > > >
> >> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
> >> [hidden email]>
> >> > > > > wrote:
> >> > > > > > > >
> >> > > > > > > > Hi
> >> > > > > > > >
> >> > > > > > > > Okay it should all be done now. The last bits at pushed and
> >> the code
> >> > > > > > > > base is ready for the release.
> >> > > > > > > > The RAT plugin has been run and fixed license issues and
> >> also CS
> >> > > > > > > > should be fixed.
> >> > > > > > > >
> >> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
> >> [hidden email]>
> >> > > > > wrote:
> >> > > > > > > > >
> >> > > > > > > > > Hi
> >> > > > > > > > >
> >> > > > > > > > > I am still working, running final set of tests before
> >> pushing.
> >> > > > > > > > >
> >> > > > > > > > > There were just a few too good optimizations in core type
> >> converter
> >> > > > > > > > > that I couldn't let go without.
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> >> > > > > > > > > <[hidden email]> wrote:
> >> > > > > > > > > >
> >> > > > > > > > > > Thanks for the heads-up.
> >> > > > > > > > > >
> >> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> >> > > > > [hidden email]> wrote:
> >> > > > > > > > > >
> >> > > > > > > > > > > Hi
> >> > > > > > > > > > >
> >> > > > > > > > > > > There are a few things I am working on. I will let
> >> you know
> >> > > > > later
> >> > > > > > > > > > > today when its done and the code base should be ready
> >> for
> >> > > > > cutting the
> >> > > > > > > > > > > 3.1.0 release.
> >> > > > > > > > > > >
> >> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> >> > > > > [hidden email]>
> >> > > > > > > > > > > wrote:
> >> > > > > > > > > > > >
> >> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add
> >> the other
> >> > > > > aws2
> >> > > > > > > > > > > > components later
> >> > > > > > > > > > > >
> >> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> >> > > > > [hidden email]> ha
> >> > > > > > > > > > > scritto:
> >> > > > > > > > > > > >
> >> > > > > > > > > > > > > So we want an RC right? So we are doing rc1? Or
> >> do we want
> >> > > > > a final
> >> > > > > > > > > > > > > release? I still have to finish the aws2
> >> components
> >> > > > > > > > > > > > >
> >> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> >> > > > > [hidden email]> ha
> >> > > > > > > > > > > scritto:
> >> > > > > > > > > > > > >
> >> > > > > > > > > > > > >> Hi
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg
> >> GA) and
> >> > > > > not a RC1 RC2
> >> > > > > > > > > > > > >> etc which we did for 3.0.
> >> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch
> >> release and
> >> > > > > encourage users
> >> > > > > > > > > > > > >> to upgrade to 3.1.0.
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >> And then we can work on 3.2 and get it released
> >> within a
> >> > > > > couple of
> >> > > > > > > > > > > > >> months or so, eg to get innovation out quicker
> >> to the
> >> > > > > community.
> >> > > > > > > > > > > > >> Especially now as we have kafka connectors,
> >> quarkus,
> >> > > > > spring boot as
> >> > > > > > > > > > > > >> sub projects and they all need to innovate,
> >> especially
> >> > > > > the first two.
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> >> > > > > > > > > > > > >> <[hidden email]> wrote:
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea
> >> Cosentino<
> >> > > > > > > > > > > [hidden email]>
> >> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I
> >> thought
> >> > > > > about the final
> >> > > > > > > > > > > > >> release of 3.1.
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> > Sorry, I misunderstood
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> >> > > > > [hidden email]> ha
> >> > > > > > > > > > > > >> scritto:
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >> > > Hi
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > > Oh sorry I think its actually better to get
> >> an RC cut
> >> > > > > this
> >> > > > > > > > > > > weekend.
> >> > > > > > > > > > > > >> > > The code is ready as-is.
> >> > > > > > > > > > > > >> > > Even though I found a little optimization I
> >> am
> >> > > > > currently working
> >> > > > > > > > > > > on.
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0
> >> is
> >> > > > > "using too much
> >> > > > > > > > > > > object
> >> > > > > > > > > > > > >> > > allocations".
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > > Gregor so if you can find time then let us
> >> know.
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea
> >> Cosentino <
> >> > > > > > > > > > > [hidden email]>
> >> > > > > > > > > > > > >> > > wrote:
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > Hello Gregor,
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > There is still some work pending.
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > Probably torwards the end of February.
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > Thanks for your time
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> >> > > > > > > > > > > [hidden email]>
> >> > > > > > > > > > > > >> ha
> >> > > > > > > > > > > > >> > > > scritto:
> >> > > > > > > > > > > > >> > > >
> >> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC this
> >> weekend
> >> > > > > already?
> >> > > > > > > > > > > > >> > > > >
> >> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus
> >> Ibsen <
> >> > > > > > > > > > > [hidden email]>
> >> > > > > > > > > > > > >> > > wrote:
> >> > > > > > > > > > > > >> > > > >
> >> > > > > > > > > > > > >> > > > > > Hi
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been
> >> fixed, it
> >> > > > > works now again
> >> > > > > > > > > > > for
> >> > > > > > > > > > > > >> both
> >> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > > Gregor if you are listening, then can
> >> you let
> >> > > > > us know if you
> >> > > > > > > > > > > > >> have
> >> > > > > > > > > > > > >> > > time
> >> > > > > > > > > > > > >> > > > > > in the foreseeable future to built the
> >> release?
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus
> >> Ibsen <
> >> > > > > > > > > > > > >> [hidden email]>
> >> > > > > > > > > > > > >> > > > > wrote:
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > Hi
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > Okay so things are going well.
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > The examples has been migrated.
> >> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is now
> >> online on
> >> > > > > the website.
> >> > > > > > > > > > > And
> >> > > > > > > > > > > > >> the
> >> > > > > > > > > > > > >> > > auto
> >> > > > > > > > > > > > >> > > > > > > configuration options is included in
> >> the
> >> > > > > component doc of
> >> > > > > > > > > > > > >> those
> >> > > > > > > > > > > > >> > > whom
> >> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
> >> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now
> >> also online.
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
> >> blueprint on
> >> > > > > Karaf with JDK8.
> >> > > > > > > > > > > > >> This
> >> > > > > > > > > > > > >> > > works
> >> > > > > > > > > > > > >> > > > > > > with JDK11.
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > As this potentially is a hard issue
> >> to
> >> > > > > resolve, then we
> >> > > > > > > > > > > can
> >> > > > > > > > > > > > >> add
> >> > > > > > > > > > > > >> > > this
> >> > > > > > > > > > > > >> > > > > > > as a known issue, and see if we can
> >> fix it
> >> > > > > for 3.1.1, or
> >> > > > > > > > > > > > >> worst-case
> >> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > The CI server looks good. I fixed
> >> the ES test
> >> > > > > errors that
> >> > > > > > > > > > > was
> >> > > > > > > > > > > > >> > > flaky.
> >> > > > > > > > > > > > >> > > > > > > The other test errors were also
> >> related to
> >> > > > > "port number in
> >> > > > > > > > > > > > >> use"
> >> > > > > > > > > > > > >> > > etc.
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test
> >> errors related
> >> > > > > to SSL
> >> > > > > > > > > > > security
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > >
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > >
> >> > > > >
> >> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM
> >> Claus Ibsen <
> >> > > > > > > > > > > > >> > > [hidden email]>
> >> > > > > > > > > > > > >> > > > > > wrote:
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > Hi
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > Oh we have even more awesome
> >> progress now.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > All the work with reflection vs
> >> source code
> >> > > > > generated
> >> > > > > > > > > > > > >> > > configurers has
> >> > > > > > > > > > > > >> > > > > > bene done.
> >> > > > > > > > > > > > >> > > > > > > > And also on the model with the
> >> property
> >> > > > > placeholders.
> >> > > > > > > > > > > Thats
> >> > > > > > > > > > > > >> a
> >> > > > > > > > > > > > >> > > great
> >> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200
> >> classes and
> >> > > > > have about 90kb
> >> > > > > > > > > > > map
> >> > > > > > > > > > > > >> > > object
> >> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> >> > > > > domination from Camel
> >> > > > > > > > > > > > >> > > according to
> >> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
> >> DefaultCamelContext
> >> > > > > again ;)
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also
> >> been
> >> > > > > fixed.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > The examples are currently being
> >> migrated
> >> > > > > and its
> >> > > > > > > > > > > removed
> >> > > > > > > > > > > > >> from
> >> > > > > > > > > > > > >> > > the
> >> > > > > > > > > > > > >> > > > > > main repo.
> >> > > > > > > > > > > > >> > > > > > > > Omar is working on this.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > The spring boot still has
> >> outstanding to
> >> > > > > have the docs
> >> > > > > > > > > > > and
> >> > > > > > > > > > > > >> its
> >> > > > > > > > > > > > >> > > > > website
> >> > > > > > > > > > > > >> > > > > > > > as part of the Camel website.
> >> > > > > > > > > > > > >> > > > > > > > Zoran will help with this.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > The etcd component has a wrong
> >> structure
> >> > > > > with
> >> > > > > > > > > > > > >> > > endpoints/components.
> >> > > > > > > > > > > > >> > > > > > > > I will look into this.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> >> > > > > deprecated, and if
> >> > > > > > > > > > > we
> >> > > > > > > > > > > > >> have
> >> > > > > > > > > > > > >> > > the
> >> > > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new
> >> yaml
> >> > > > > dataformat and
> >> > > > > > > > > > > use it
> >> > > > > > > > > > > > >> as
> >> > > > > > > > > > > > >> > > > > > > > default.
> >> > > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > And then we need to fix test
> >> failures on CI
> >> > > > > on both
> >> > > > > > > > > > > JDK8 and
> >> > > > > > > > > > > > >> > > JDK11
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > And I may add a few more
> >> optimizations.
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM
> >> Claus
> >> > > > > Ibsen <
> >> > > > > > > > > > > > >> > > [hidden email]>
> >> > > > > > > > > > > > >> > > > > > wrote:
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > Hi
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > I just wanted to start the
> >> process of
> >> > > > > getting closer
> >> > > > > > > > > > > to
> >> > > > > > > > > > > > >> Camel
> >> > > > > > > > > > > > >> > > 3.1
> >> > > > > > > > > > > > >> > > > > > release.
> >> > > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a
> >> while
> >> > > > > back, then we
> >> > > > > > > > > > > have
> >> > > > > > > > > > > > >> made
> >> > > > > > > > > > > > >> > > great
> >> > > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is
> >> important to get
> >> > > > > in the hands
> >> > > > > > > > > > > of
> >> > > > > > > > > > > > >> the
> >> > > > > > > > > > > > >> > > Camel
> >> > > > > > > > > > > > >> > > > > > > > > users. And for Camel users that
> >> migrate
> >> > > > > to 3.x can
> >> > > > > > > > > > > then
> >> > > > > > > > > > > > >> skip
> >> > > > > > > > > > > > >> > > 3.0
> >> > > > > > > > > > > > >> > > > > and
> >> > > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > I am working on some further
> >> > > > > optimizations in the core
> >> > > > > > > > > > > > >> for 3.1,
> >> > > > > > > > > > > > >> > > > > and I
> >> > > > > > > > > > > > >> > > > > > > > > hope to find time to share more
> >> details
> >> > > > > in a blog.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > However to get the other work
> >> (high
> >> > > > > level) done and
> >> > > > > > > > > > > ready
> >> > > > > > > > > > > > >> for
> >> > > > > > > > > > > > >> > > 3.1,
> >> > > > > > > > > > > > >> > > > > > > > > then lets discuss them here on
> >> the @dev
> >> > > > > mailing list.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > 1)
> >> > > > > > > > > > > > >> > > > > > > > > Finish the separation of
> >> > > > > camel-spring-boot (there are
> >> > > > > > > > > > > some
> >> > > > > > > > > > > > >> > > tools
> >> > > > > > > > > > > > >> > > > > that
> >> > > > > > > > > > > > >> > > > > > > > > update docs and generate
> >> component list)
> >> > > > > that needs
> >> > > > > > > > > > > to be
> >> > > > > > > > > > > > >> > > > > completed.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > 2)
> >> > > > > > > > > > > > >> > > > > > > > > Generate source code configurer
> >> for data
> >> > > > > formats and
> >> > > > > > > > > > > > >> languages
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > 3)
> >> > > > > > > > > > > > >> > > > > > > > > The component configuration
> >> fluent
> >> > > > > builder (would be
> >> > > > > > > > > > > nice)
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > 4)
> >> > > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > 5)
> >> > > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new
> >> lightweight
> >> > > > > XML route
> >> > > > > > > > > > > > >> > > parser/loader
> >> > > > > > > > > > > > >> > > > > (for
> >> > > > > > > > > > > > >> > > > > > > > > example auto discover on
> >> classpath the
> >> > > > > JAR and use it
> >> > > > > > > > > > > > >> instead
> >> > > > > > > > > > > > >> > > of
> >> > > > > > > > > > > > >> > > > > > JAXB)
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > There are other things of
> >> course, but
> >> > > > > these are the
> >> > > > > > > > > > > > >> bigger high
> >> > > > > > > > > > > > >> > > > > level
> >> > > > > > > > > > > > >> > > > > > > > > things I could remember.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > The usual work with new
> >> components,
> >> > > > > examples, other
> >> > > > > > > > > > > > >> > > improvements is
> >> > > > > > > > > > > > >> > > > > > of
> >> > > > > > > > > > > > >> > > > > > > > > course also ongoing.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > Lets see if we can get this done
> >> and
> >> > > > > release Camel
> >> > > > > > > > > > > 3.1 in
> >> > > > > > > > > > > > >> > > February.
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > > --
> >> > > > > > > > > > > > >> > > > > > > > > Claus Ibsen
> >> > > > > > > > > > > > >> > > > > > > > > -----------------
> >> > > > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> >> > > > > https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > >
> >> > > > > > > > > > > > >> > > > > > > > --
> >> > > > > > > > > > > > >> > > > > > > > Claus Ibsen
> >> > > > > > > > > > > > >> > > > > > > > -----------------
> >> > > > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> > > > > > > > Camel in Action 2:
> >> > > > > https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > >
> >> > > > > > > > > > > > >> > > > > > > --
> >> > > > > > > > > > > > >> > > > > > > Claus Ibsen
> >> > > > > > > > > > > > >> > > > > > > -----------------
> >> > > > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> > > > > > > Camel in Action 2:
> >> > > > > https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > > > --
> >> > > > > > > > > > > > >> > > > > > Claus Ibsen
> >> > > > > > > > > > > > >> > > > > > -----------------
> >> > > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> > > > > > Camel in Action 2:
> >> > > > > https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >> > > > > >
> >> > > > > > > > > > > > >> > > > >
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> > > --
> >> > > > > > > > > > > > >> > > Claus Ibsen
> >> > > > > > > > > > > > >> > > -----------------
> >> > > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> > > Camel in Action 2:
> >> https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >> > >
> >> > > > > > > > > > > > >> >
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >> --
> >> > > > > > > > > > > > >> Claus Ibsen
> >> > > > > > > > > > > > >> -----------------
> >> > > > > > > > > > > > >> http://davsclaus.com @davsclaus
> >> > > > > > > > > > > > >> Camel in Action 2:
> >> https://www.manning.com/ibsen2
> >> > > > > > > > > > > > >>
> >> > > > > > > > > > > > >
> >> > > > > > > > > > >
> >> > > > > > > > > > >
> >> > > > > > > > > > >
> >> > > > > > > > > > > --
> >> > > > > > > > > > > Claus Ibsen
> >> > > > > > > > > > > -----------------
> >> > > > > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > >
> >> > > > > > > > > --
> >> > > > > > > > > Claus Ibsen
> >> > > > > > > > > -----------------
> >> > > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > > --
> >> > > > > > > > Claus Ibsen
> >> > > > > > > > -----------------
> >> > > > > > > > http://davsclaus.com @davsclaus
> >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > > --
> >> > > > > > Claus Ibsen
> >> > > > > > -----------------
> >> > > > > > http://davsclaus.com @davsclaus
> >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> >> > > > >
> >>
> >
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
You can reproduce the problem by simply running the following (dry
run) command on the current master branch: "./mvnw release:prepare
-DdryRun -Prelease"


On Mon, Feb 17, 2020 at 9:12 PM Gregor Zurowski
<[hidden email]> wrote:

>
> I agree, but I received that message when building version 3.1.0:
>
> [INFO] [INFO] ------------------------------------------------------------------------
> [INFO] [INFO] BUILD FAILURE
> [INFO] [INFO] ------------------------------------------------------------------------
> [INFO] [INFO] Total time:  01:18 min
> [INFO] [INFO] Finished at: 2020-02-17T11:57:36-08:00
> [INFO] [INFO] ------------------------------------------------------------------------
> [INFO] [ERROR] Failed to parse plugin descriptor for
> org.apache.camel:camel-bundle-plugin:3.0.1
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> [INFO] [ERROR]
> [INFO] [ERROR] To see the full stack trace of the errors, re-run Maven
> with the -e switch.
> [INFO] [ERROR] Re-run Maven using the -X switch to enable full debug logging.
> [INFO] [ERROR]
> [INFO] [ERROR] For more information about the errors and possible
> solutions, please read the following articles:
> [INFO] [ERROR] [Help 1]
> http://cwiki.apache.org/confluence/display/MAVEN/PluginDescriptorParsingException
> [INFO] ------------------------------------------------------------------------
> [INFO] Reactor Summary for Camel 3.1.0-SNAPSHOT:
> [...]
>
> On Mon, Feb 17, 2020 at 9:05 PM Andrea Cosentino <[hidden email]> wrote:
> >
> > It should be the version you're releasing because is part of the 3.1 release
> >
> > Il lun 17 feb 2020, 21:04 Andrea Cosentino <[hidden email]> ha scritto:
> >
> > > It shouldn't be 3.0.1
> > >
> > > Il lun 17 feb 2020, 21:00 Gregor Zurowski <[hidden email]> ha
> > > scritto:
> > >
> > >> I've managed to work around the described problem regarding
> > >> camel-bundle-plugin by removing all explicit "<version>" tags, but now
> > >> getting other problems:
> > >>
> > >> ===
> > >> [INFO] [ERROR] Failed to parse plugin descriptor for
> > >> org.apache.camel:camel-bundle-plugin:3.0.1
> > >>
> > >> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> > >> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> > >> ===
> > >>
> > >> Any ideas?
> > >>
> > >> Thanks,
> > >> Gregor
> > >>
> > >> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
> > >> <[hidden email]> wrote:
> > >> >
> > >> > I am still working on it, and I believe I have found something to fix
> > >> > it. I'll post an update shortly.
> > >> >
> > >> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
> > >> >
> > >> >
> > >> > <[hidden email]> wrote:
> > >> > >
> > >> > > Were you able to workaround it for the moment?
> > >> > >
> > >> > > --
> > >> > > Andrea Cosentino
> > >> > > ----------------------------------
> > >> > > Apache Camel PMC Chair
> > >> > > Apache Karaf Committer
> > >> > > Apache Servicemix PMC Member
> > >> > > Email: [hidden email]
> > >> > > Twitter: @oscerd2
> > >> > > Github: oscerd
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor Zurowski <
> > >> [hidden email]> wrote:
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > >
> > >> > > Yes, that's why I am not sure why the release plugin fails on it. I
> > >> > > believe this worked without issues before the refactoring for
> > >> > > CAMEL-14444 that added the version tags explicitly to every occurrence
> > >> > > where the camel-bundle-plugin is used.
> > >> > >
> > >> > >
> > >> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <[hidden email]>
> > >> wrote:
> > >> > > >
> > >> > > > If you run help:effective-pom the version seems to be correct for it
> > >> > > >
> > >> > > >
> > >> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> > >> > > >
> > >> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > >> > > > [hidden email]> ha scritto:
> > >> > > >
> > >> > > > > Hi Claus,
> > >> > > > >
> > >> > > > > There's an assignment in the parent/pom.xml already:
> > >> > > > >
> > >> > > > >
> > >> > > > >
> > >> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > >> > > > >
> > >> > > > > (see
> > >> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > >> > > > >
> > >> > > > > I am wondering why that isn't sufficient.
> > >> > > > >
> > >> > > > > Thanks,
> > >> > > > > Gregor
> > >> > > > >
> > >> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <
> > >> [hidden email]> wrote:
> > >> > > > > >
> > >> > > > > > Hi Gregor
> > >> > > > > >
> > >> > > > > > Thanks for starting the release.
> > >> > > > > >
> > >> > > > > > Yeah doing a git grep on that placeholders shows that its never
> > >> > > > > > assigned a version.
> > >> > > > > > Since the plugin is part of the release, then it can maybe just
> > >> be
> > >> > > > > > ${project.version} instead.
> > >> > > > > >
> > >> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > >> > > > > > <[hidden email]> wrote:
> > >> > > > > > >
> > >> > > > > > > Hi Everyone:
> > >> > > > > > >
> > >> > > > > > > I've started validating the branch for a 3.1 release but I am
> > >> getting
> > >> > > > > > > the following error when preparing the release:
> > >> > > > > > >
> > >> > > > > > > [ERROR] Failed to execute goal
> > >> > > > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > >> > > > > > > (default-cli) on project camel: The version could not be
> > >> updated:
> > >> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > >> > > > > > > org.apache.maven.lifecycle.LifecycleExecutionException:
> > >> Failed to
> > >> > > > > > > execute goal
> > >> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > >> > > > > > > (default-cli) on project camel: The version could not be
> > >> updated:
> > >> > > > > > > ${camel-bundle-plugin-version}
> > >> > > > > > >
> > >> > > > > > > I know there have been some changes around
> > >> camel-bundle-plugin in
> > >> > > > > > >
> > >> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444, but
> > >> > > > > > > I am not sure what is causing the issues yet.
> > >> > > > > > >
> > >> > > > > > > Thanks,
> > >> > > > > > > Gregor
> > >> > > > > > >
> > >> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
> > >> [hidden email]>
> > >> > > > > wrote:
> > >> > > > > > > >
> > >> > > > > > > > Hi
> > >> > > > > > > >
> > >> > > > > > > > Okay it should all be done now. The last bits at pushed and
> > >> the code
> > >> > > > > > > > base is ready for the release.
> > >> > > > > > > > The RAT plugin has been run and fixed license issues and
> > >> also CS
> > >> > > > > > > > should be fixed.
> > >> > > > > > > >
> > >> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
> > >> [hidden email]>
> > >> > > > > wrote:
> > >> > > > > > > > >
> > >> > > > > > > > > Hi
> > >> > > > > > > > >
> > >> > > > > > > > > I am still working, running final set of tests before
> > >> pushing.
> > >> > > > > > > > >
> > >> > > > > > > > > There were just a few too good optimizations in core type
> > >> converter
> > >> > > > > > > > > that I couldn't let go without.
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > >> > > > > > > > > <[hidden email]> wrote:
> > >> > > > > > > > > >
> > >> > > > > > > > > > Thanks for the heads-up.
> > >> > > > > > > > > >
> > >> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > >> > > > > [hidden email]> wrote:
> > >> > > > > > > > > >
> > >> > > > > > > > > > > Hi
> > >> > > > > > > > > > >
> > >> > > > > > > > > > > There are a few things I am working on. I will let
> > >> you know
> > >> > > > > later
> > >> > > > > > > > > > > today when its done and the code base should be ready
> > >> for
> > >> > > > > cutting the
> > >> > > > > > > > > > > 3.1.0 release.
> > >> > > > > > > > > > >
> > >> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea Cosentino <
> > >> > > > > [hidden email]>
> > >> > > > > > > > > > > wrote:
> > >> > > > > > > > > > > >
> > >> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I can add
> > >> the other
> > >> > > > > aws2
> > >> > > > > > > > > > > > components later
> > >> > > > > > > > > > > >
> > >> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > >> > > > > [hidden email]> ha
> > >> > > > > > > > > > > scritto:
> > >> > > > > > > > > > > >
> > >> > > > > > > > > > > > > So we want an RC right? So we are doing rc1? Or
> > >> do we want
> > >> > > > > a final
> > >> > > > > > > > > > > > > release? I still have to finish the aws2
> > >> components
> > >> > > > > > > > > > > > >
> > >> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > >> > > > > [hidden email]> ha
> > >> > > > > > > > > > > scritto:
> > >> > > > > > > > > > > > >
> > >> > > > > > > > > > > > >> Hi
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >> I actually think its fine with 3.1.0 release (eg
> > >> GA) and
> > >> > > > > not a RC1 RC2
> > >> > > > > > > > > > > > >> etc which we did for 3.0.
> > >> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch
> > >> release and
> > >> > > > > encourage users
> > >> > > > > > > > > > > > >> to upgrade to 3.1.0.
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >> And then we can work on 3.2 and get it released
> > >> within a
> > >> > > > > couple of
> > >> > > > > > > > > > > > >> months or so, eg to get innovation out quicker
> > >> to the
> > >> > > > > community.
> > >> > > > > > > > > > > > >> Especially now as we have kafka connectors,
> > >> quarkus,
> > >> > > > > spring boot as
> > >> > > > > > > > > > > > >> sub projects and they all need to innovate,
> > >> especially
> > >> > > > > the first two.
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea Cosentino
> > >> > > > > > > > > > > > >> <[hidden email]> wrote:
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea
> > >> Cosentino<
> > >> > > > > > > > > > > [hidden email]>
> > >> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine. I
> > >> thought
> > >> > > > > about the final
> > >> > > > > > > > > > > > >> release of 3.1.
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> > Sorry, I misunderstood
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > >> > > > > [hidden email]> ha
> > >> > > > > > > > > > > > >> scritto:
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >> > > Hi
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > > Oh sorry I think its actually better to get
> > >> an RC cut
> > >> > > > > this
> > >> > > > > > > > > > > weekend.
> > >> > > > > > > > > > > > >> > > The code is ready as-is.
> > >> > > > > > > > > > > > >> > > Even though I found a little optimization I
> > >> am
> > >> > > > > currently working
> > >> > > > > > > > > > > on.
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > > There are end users whom want 3.1 now as 3.0
> > >> is
> > >> > > > > "using too much
> > >> > > > > > > > > > > object
> > >> > > > > > > > > > > > >> > > allocations".
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > > Gregor so if you can find time then let us
> > >> know.
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea
> > >> Cosentino <
> > >> > > > > > > > > > > [hidden email]>
> > >> > > > > > > > > > > > >> > > wrote:
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > Hello Gregor,
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > There is still some work pending.
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > Probably torwards the end of February.
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > Thanks for your time
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor Zurowski <
> > >> > > > > > > > > > > [hidden email]>
> > >> > > > > > > > > > > > >> ha
> > >> > > > > > > > > > > > >> > > > scritto:
> > >> > > > > > > > > > > > >> > > >
> > >> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC this
> > >> weekend
> > >> > > > > already?
> > >> > > > > > > > > > > > >> > > > >
> > >> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus
> > >> Ibsen <
> > >> > > > > > > > > > > [hidden email]>
> > >> > > > > > > > > > > > >> > > wrote:
> > >> > > > > > > > > > > > >> > > > >
> > >> > > > > > > > > > > > >> > > > > > Hi
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been
> > >> fixed, it
> > >> > > > > works now again
> > >> > > > > > > > > > > for
> > >> > > > > > > > > > > > >> both
> > >> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > > Gregor if you are listening, then can
> > >> you let
> > >> > > > > us know if you
> > >> > > > > > > > > > > > >> have
> > >> > > > > > > > > > > > >> > > time
> > >> > > > > > > > > > > > >> > > > > > in the foreseeable future to built the
> > >> release?
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM Claus
> > >> Ibsen <
> > >> > > > > > > > > > > > >> [hidden email]>
> > >> > > > > > > > > > > > >> > > > > wrote:
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > Hi
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > Okay so things are going well.
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > The examples has been migrated.
> > >> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is now
> > >> online on
> > >> > > > > the website.
> > >> > > > > > > > > > > And
> > >> > > > > > > > > > > > >> the
> > >> > > > > > > > > > > > >> > > auto
> > >> > > > > > > > > > > > >> > > > > > > configuration options is included in
> > >> the
> > >> > > > > component doc of
> > >> > > > > > > > > > > > >> those
> > >> > > > > > > > > > > > >> > > whom
> > >> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
> > >> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is now
> > >> also online.
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
> > >> blueprint on
> > >> > > > > Karaf with JDK8.
> > >> > > > > > > > > > > > >> This
> > >> > > > > > > > > > > > >> > > works
> > >> > > > > > > > > > > > >> > > > > > > with JDK11.
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > As this potentially is a hard issue
> > >> to
> > >> > > > > resolve, then we
> > >> > > > > > > > > > > can
> > >> > > > > > > > > > > > >> add
> > >> > > > > > > > > > > > >> > > this
> > >> > > > > > > > > > > > >> > > > > > > as a known issue, and see if we can
> > >> fix it
> > >> > > > > for 3.1.1, or
> > >> > > > > > > > > > > > >> worst-case
> > >> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger changes.
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > The CI server looks good. I fixed
> > >> the ES test
> > >> > > > > errors that
> > >> > > > > > > > > > > was
> > >> > > > > > > > > > > > >> > > flaky.
> > >> > > > > > > > > > > > >> > > > > > > The other test errors were also
> > >> related to
> > >> > > > > "port number in
> > >> > > > > > > > > > > > >> use"
> > >> > > > > > > > > > > > >> > > etc.
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test
> > >> errors related
> > >> > > > > to SSL
> > >> > > > > > > > > > > security
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > >
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > >
> > >> > > > >
> > >> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19 AM
> > >> Claus Ibsen <
> > >> > > > > > > > > > > > >> > > [hidden email]>
> > >> > > > > > > > > > > > >> > > > > > wrote:
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > Hi
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > Oh we have even more awesome
> > >> progress now.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > All the work with reflection vs
> > >> source code
> > >> > > > > generated
> > >> > > > > > > > > > > > >> > > configurers has
> > >> > > > > > > > > > > > >> > > > > > bene done.
> > >> > > > > > > > > > > > >> > > > > > > > And also on the model with the
> > >> property
> > >> > > > > placeholders.
> > >> > > > > > > > > > > Thats
> > >> > > > > > > > > > > > >> a
> > >> > > > > > > > > > > > >> > > great
> > >> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200
> > >> classes and
> > >> > > > > have about 90kb
> > >> > > > > > > > > > > map
> > >> > > > > > > > > > > > >> > > object
> > >> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest object
> > >> > > > > domination from Camel
> > >> > > > > > > > > > > > >> > > according to
> > >> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
> > >> DefaultCamelContext
> > >> > > > > again ;)
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has also
> > >> been
> > >> > > > > fixed.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > The examples are currently being
> > >> migrated
> > >> > > > > and its
> > >> > > > > > > > > > > removed
> > >> > > > > > > > > > > > >> from
> > >> > > > > > > > > > > > >> > > the
> > >> > > > > > > > > > > > >> > > > > > main repo.
> > >> > > > > > > > > > > > >> > > > > > > > Omar is working on this.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > The spring boot still has
> > >> outstanding to
> > >> > > > > have the docs
> > >> > > > > > > > > > > and
> > >> > > > > > > > > > > > >> its
> > >> > > > > > > > > > > > >> > > > > website
> > >> > > > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > >> > > > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > The etcd component has a wrong
> > >> structure
> > >> > > > > with
> > >> > > > > > > > > > > > >> > > endpoints/components.
> > >> > > > > > > > > > > > >> > > > > > > > I will look into this.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > The snakeyaml component needs to be
> > >> > > > > deprecated, and if
> > >> > > > > > > > > > > we
> > >> > > > > > > > > > > > >> have
> > >> > > > > > > > > > > > >> > > the
> > >> > > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a new
> > >> yaml
> > >> > > > > dataformat and
> > >> > > > > > > > > > > use it
> > >> > > > > > > > > > > > >> as
> > >> > > > > > > > > > > > >> > > > > > > > default.
> > >> > > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > And then we need to fix test
> > >> failures on CI
> > >> > > > > on both
> > >> > > > > > > > > > > JDK8 and
> > >> > > > > > > > > > > > >> > > JDK11
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > And I may add a few more
> > >> optimizations.
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at 11:18 AM
> > >> Claus
> > >> > > > > Ibsen <
> > >> > > > > > > > > > > > >> > > [hidden email]>
> > >> > > > > > > > > > > > >> > > > > > wrote:
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > Hi
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > I just wanted to start the
> > >> process of
> > >> > > > > getting closer
> > >> > > > > > > > > > > to
> > >> > > > > > > > > > > > >> Camel
> > >> > > > > > > > > > > > >> > > 3.1
> > >> > > > > > > > > > > > >> > > > > > release.
> > >> > > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released only a
> > >> while
> > >> > > > > back, then we
> > >> > > > > > > > > > > have
> > >> > > > > > > > > > > > >> made
> > >> > > > > > > > > > > > >> > > great
> > >> > > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is
> > >> important to get
> > >> > > > > in the hands
> > >> > > > > > > > > > > of
> > >> > > > > > > > > > > > >> the
> > >> > > > > > > > > > > > >> > > Camel
> > >> > > > > > > > > > > > >> > > > > > > > > users. And for Camel users that
> > >> migrate
> > >> > > > > to 3.x can
> > >> > > > > > > > > > > then
> > >> > > > > > > > > > > > >> skip
> > >> > > > > > > > > > > > >> > > 3.0
> > >> > > > > > > > > > > > >> > > > > and
> > >> > > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > I am working on some further
> > >> > > > > optimizations in the core
> > >> > > > > > > > > > > > >> for 3.1,
> > >> > > > > > > > > > > > >> > > > > and I
> > >> > > > > > > > > > > > >> > > > > > > > > hope to find time to share more
> > >> details
> > >> > > > > in a blog.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > However to get the other work
> > >> (high
> > >> > > > > level) done and
> > >> > > > > > > > > > > ready
> > >> > > > > > > > > > > > >> for
> > >> > > > > > > > > > > > >> > > 3.1,
> > >> > > > > > > > > > > > >> > > > > > > > > then lets discuss them here on
> > >> the @dev
> > >> > > > > mailing list.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > On top of my head we have to do
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > 1)
> > >> > > > > > > > > > > > >> > > > > > > > > Finish the separation of
> > >> > > > > camel-spring-boot (there are
> > >> > > > > > > > > > > some
> > >> > > > > > > > > > > > >> > > tools
> > >> > > > > > > > > > > > >> > > > > that
> > >> > > > > > > > > > > > >> > > > > > > > > update docs and generate
> > >> component list)
> > >> > > > > that needs
> > >> > > > > > > > > > > to be
> > >> > > > > > > > > > > > >> > > > > completed.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > 2)
> > >> > > > > > > > > > > > >> > > > > > > > > Generate source code configurer
> > >> for data
> > >> > > > > formats and
> > >> > > > > > > > > > > > >> languages
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > 3)
> > >> > > > > > > > > > > > >> > > > > > > > > The component configuration
> > >> fluent
> > >> > > > > builder (would be
> > >> > > > > > > > > > > nice)
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > 4)
> > >> > > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2 components
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > 5)
> > >> > > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the new
> > >> lightweight
> > >> > > > > XML route
> > >> > > > > > > > > > > > >> > > parser/loader
> > >> > > > > > > > > > > > >> > > > > (for
> > >> > > > > > > > > > > > >> > > > > > > > > example auto discover on
> > >> classpath the
> > >> > > > > JAR and use it
> > >> > > > > > > > > > > > >> instead
> > >> > > > > > > > > > > > >> > > of
> > >> > > > > > > > > > > > >> > > > > > JAXB)
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > There are other things of
> > >> course, but
> > >> > > > > these are the
> > >> > > > > > > > > > > > >> bigger high
> > >> > > > > > > > > > > > >> > > > > level
> > >> > > > > > > > > > > > >> > > > > > > > > things I could remember.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > The usual work with new
> > >> components,
> > >> > > > > examples, other
> > >> > > > > > > > > > > > >> > > improvements is
> > >> > > > > > > > > > > > >> > > > > > of
> > >> > > > > > > > > > > > >> > > > > > > > > course also ongoing.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > Lets see if we can get this done
> > >> and
> > >> > > > > release Camel
> > >> > > > > > > > > > > 3.1 in
> > >> > > > > > > > > > > > >> > > February.
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > > --
> > >> > > > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > >> > > > > > > > > > > > >> > > > > > > > > -----------------
> > >> > > > > > > > > > > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > >> > > > > https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > > --
> > >> > > > > > > > > > > > >> > > > > > > > Claus Ibsen
> > >> > > > > > > > > > > > >> > > > > > > > -----------------
> > >> > > > > > > > > > > > >> > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > >> > > > > https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > >
> > >> > > > > > > > > > > > >> > > > > > > --
> > >> > > > > > > > > > > > >> > > > > > > Claus Ibsen
> > >> > > > > > > > > > > > >> > > > > > > -----------------
> > >> > > > > > > > > > > > >> > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> > > > > > > Camel in Action 2:
> > >> > > > > https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > > > --
> > >> > > > > > > > > > > > >> > > > > > Claus Ibsen
> > >> > > > > > > > > > > > >> > > > > > -----------------
> > >> > > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> > > > > > Camel in Action 2:
> > >> > > > > https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >> > > > > >
> > >> > > > > > > > > > > > >> > > > >
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> > > --
> > >> > > > > > > > > > > > >> > > Claus Ibsen
> > >> > > > > > > > > > > > >> > > -----------------
> > >> > > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> > > Camel in Action 2:
> > >> https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >> > >
> > >> > > > > > > > > > > > >> >
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >> --
> > >> > > > > > > > > > > > >> Claus Ibsen
> > >> > > > > > > > > > > > >> -----------------
> > >> > > > > > > > > > > > >> http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > > >> Camel in Action 2:
> > >> https://www.manning.com/ibsen2
> > >> > > > > > > > > > > > >>
> > >> > > > > > > > > > > > >
> > >> > > > > > > > > > >
> > >> > > > > > > > > > >
> > >> > > > > > > > > > >
> > >> > > > > > > > > > > --
> > >> > > > > > > > > > > Claus Ibsen
> > >> > > > > > > > > > > -----------------
> > >> > > > > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > >
> > >> > > > > > > > > --
> > >> > > > > > > > > Claus Ibsen
> > >> > > > > > > > > -----------------
> > >> > > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > >
> > >> > > > > > > > --
> > >> > > > > > > > Claus Ibsen
> > >> > > > > > > > -----------------
> > >> > > > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > > >
> > >> > > > > >
> > >> > > > > >
> > >> > > > > > --
> > >> > > > > > Claus Ibsen
> > >> > > > > > -----------------
> > >> > > > > > http://davsclaus.com @davsclaus
> > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > >> > > > >
> > >>
> > >
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Guillaume Nodet-2
Would you please try again ? I've pushed a change which will hopefully fix
the problem.

Le lun. 17 févr. 2020 à 21:14, Gregor Zurowski <[hidden email]> a
écrit :

> You can reproduce the problem by simply running the following (dry
> run) command on the current master branch: "./mvnw release:prepare
> -DdryRun -Prelease"
>
>
> On Mon, Feb 17, 2020 at 9:12 PM Gregor Zurowski
> <[hidden email]> wrote:
> >
> > I agree, but I received that message when building version 3.1.0:
> >
> > [INFO] [INFO]
> ------------------------------------------------------------------------
> > [INFO] [INFO] BUILD FAILURE
> > [INFO] [INFO]
> ------------------------------------------------------------------------
> > [INFO] [INFO] Total time:  01:18 min
> > [INFO] [INFO] Finished at: 2020-02-17T11:57:36-08:00
> > [INFO] [INFO]
> ------------------------------------------------------------------------
> > [INFO] [ERROR] Failed to parse plugin descriptor for
> > org.apache.camel:camel-bundle-plugin:3.0.1
> >
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> > No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> > [INFO] [ERROR]
> > [INFO] [ERROR] To see the full stack trace of the errors, re-run Maven
> > with the -e switch.
> > [INFO] [ERROR] Re-run Maven using the -X switch to enable full debug
> logging.
> > [INFO] [ERROR]
> > [INFO] [ERROR] For more information about the errors and possible
> > solutions, please read the following articles:
> > [INFO] [ERROR] [Help 1]
> >
> http://cwiki.apache.org/confluence/display/MAVEN/PluginDescriptorParsingException
> > [INFO]
> ------------------------------------------------------------------------
> > [INFO] Reactor Summary for Camel 3.1.0-SNAPSHOT:
> > [...]
> >
> > On Mon, Feb 17, 2020 at 9:05 PM Andrea Cosentino <[hidden email]>
> wrote:
> > >
> > > It should be the version you're releasing because is part of the 3.1
> release
> > >
> > > Il lun 17 feb 2020, 21:04 Andrea Cosentino <[hidden email]> ha
> scritto:
> > >
> > > > It shouldn't be 3.0.1
> > > >
> > > > Il lun 17 feb 2020, 21:00 Gregor Zurowski <[hidden email]>
> ha
> > > > scritto:
> > > >
> > > >> I've managed to work around the described problem regarding
> > > >> camel-bundle-plugin by removing all explicit "<version>" tags, but
> now
> > > >> getting other problems:
> > > >>
> > > >> ===
> > > >> [INFO] [ERROR] Failed to parse plugin descriptor for
> > > >> org.apache.camel:camel-bundle-plugin:3.0.1
> > > >>
> > > >>
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> > > >> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> > > >> ===
> > > >>
> > > >> Any ideas?
> > > >>
> > > >> Thanks,
> > > >> Gregor
> > > >>
> > > >> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
> > > >> <[hidden email]> wrote:
> > > >> >
> > > >> > I am still working on it, and I believe I have found something to
> fix
> > > >> > it. I'll post an update shortly.
> > > >> >
> > > >> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
> > > >> >
> > > >> >
> > > >> > <[hidden email]> wrote:
> > > >> > >
> > > >> > > Were you able to workaround it for the moment?
> > > >> > >
> > > >> > > --
> > > >> > > Andrea Cosentino
> > > >> > > ----------------------------------
> > > >> > > Apache Camel PMC Chair
> > > >> > > Apache Karaf Committer
> > > >> > > Apache Servicemix PMC Member
> > > >> > > Email: [hidden email]
> > > >> > > Twitter: @oscerd2
> > > >> > > Github: oscerd
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor
> Zurowski <
> > > >> [hidden email]> wrote:
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> > > Yes, that's why I am not sure why the release plugin fails on
> it. I
> > > >> > > believe this worked without issues before the refactoring for
> > > >> > > CAMEL-14444 that added the version tags explicitly to every
> occurrence
> > > >> > > where the camel-bundle-plugin is used.
> > > >> > >
> > > >> > >
> > > >> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <
> [hidden email]>
> > > >> wrote:
> > > >> > > >
> > > >> > > > If you run help:effective-pom the version seems to be correct
> for it
> > > >> > > >
> > > >> > > >
> > > >>
> <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> > > >> > > >
> > > >> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > > >> > > > [hidden email]> ha scritto:
> > > >> > > >
> > > >> > > > > Hi Claus,
> > > >> > > > >
> > > >> > > > > There's an assignment in the parent/pom.xml already:
> > > >> > > > >
> > > >> > > > >
> > > >> > > > >
> > > >>
> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > > >> > > > >
> > > >> > > > > (see
> > > >> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > > >> > > > >
> > > >> > > > > I am wondering why that isn't sufficient.
> > > >> > > > >
> > > >> > > > > Thanks,
> > > >> > > > > Gregor
> > > >> > > > >
> > > >> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <
> > > >> [hidden email]> wrote:
> > > >> > > > > >
> > > >> > > > > > Hi Gregor
> > > >> > > > > >
> > > >> > > > > > Thanks for starting the release.
> > > >> > > > > >
> > > >> > > > > > Yeah doing a git grep on that placeholders shows that its
> never
> > > >> > > > > > assigned a version.
> > > >> > > > > > Since the plugin is part of the release, then it can
> maybe just
> > > >> be
> > > >> > > > > > ${project.version} instead.
> > > >> > > > > >
> > > >> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > >> > > > > > <[hidden email]> wrote:
> > > >> > > > > > >
> > > >> > > > > > > Hi Everyone:
> > > >> > > > > > >
> > > >> > > > > > > I've started validating the branch for a 3.1 release
> but I am
> > > >> getting
> > > >> > > > > > > the following error when preparing the release:
> > > >> > > > > > >
> > > >> > > > > > > [ERROR] Failed to execute goal
> > > >> > > > > > >
> org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > >> > > > > > > (default-cli) on project camel: The version could not be
> > > >> updated:
> > > >> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > >> > > > > > > org.apache.maven.lifecycle.LifecycleExecutionException:
> > > >> Failed to
> > > >> > > > > > > execute goal
> > > >> > > > > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > >> > > > > > > (default-cli) on project camel: The version could not be
> > > >> updated:
> > > >> > > > > > > ${camel-bundle-plugin-version}
> > > >> > > > > > >
> > > >> > > > > > > I know there have been some changes around
> > > >> camel-bundle-plugin in
> > > >> > > > > > >
> > > >> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444,
> but
> > > >> > > > > > > I am not sure what is causing the issues yet.
> > > >> > > > > > >
> > > >> > > > > > > Thanks,
> > > >> > > > > > > Gregor
> > > >> > > > > > >
> > > >> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
> > > >> [hidden email]>
> > > >> > > > > wrote:
> > > >> > > > > > > >
> > > >> > > > > > > > Hi
> > > >> > > > > > > >
> > > >> > > > > > > > Okay it should all be done now. The last bits at
> pushed and
> > > >> the code
> > > >> > > > > > > > base is ready for the release.
> > > >> > > > > > > > The RAT plugin has been run and fixed license issues
> and
> > > >> also CS
> > > >> > > > > > > > should be fixed.
> > > >> > > > > > > >
> > > >> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
> > > >> [hidden email]>
> > > >> > > > > wrote:
> > > >> > > > > > > > >
> > > >> > > > > > > > > Hi
> > > >> > > > > > > > >
> > > >> > > > > > > > > I am still working, running final set of tests
> before
> > > >> pushing.
> > > >> > > > > > > > >
> > > >> > > > > > > > > There were just a few too good optimizations in
> core type
> > > >> converter
> > > >> > > > > > > > > that I couldn't let go without.
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > >> > > > > > > > > <[hidden email]> wrote:
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > Thanks for the heads-up.
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > >> > > > > [hidden email]> wrote:
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > > Hi
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > There are a few things I am working on. I will
> let
> > > >> you know
> > > >> > > > > later
> > > >> > > > > > > > > > > today when its done and the code base should be
> ready
> > > >> for
> > > >> > > > > cutting the
> > > >> > > > > > > > > > > 3.1.0 release.
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea
> Cosentino <
> > > >> > > > > [hidden email]>
> > > >> > > > > > > > > > > wrote:
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I
> can add
> > > >> the other
> > > >> > > > > aws2
> > > >> > > > > > > > > > > > components later
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > >> > > > > [hidden email]> ha
> > > >> > > > > > > > > > > scritto:
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > > So we want an RC right? So we are doing
> rc1? Or
> > > >> do we want
> > > >> > > > > a final
> > > >> > > > > > > > > > > > > release? I still have to finish the aws2
> > > >> components
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > >> > > > > [hidden email]> ha
> > > >> > > > > > > > > > > scritto:
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > >> Hi
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >> I actually think its fine with 3.1.0
> release (eg
> > > >> GA) and
> > > >> > > > > not a RC1 RC2
> > > >> > > > > > > > > > > > >> etc which we did for 3.0.
> > > >> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch
> > > >> release and
> > > >> > > > > encourage users
> > > >> > > > > > > > > > > > >> to upgrade to 3.1.0.
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >> And then we can work on 3.2 and get it
> released
> > > >> within a
> > > >> > > > > couple of
> > > >> > > > > > > > > > > > >> months or so, eg to get innovation out
> quicker
> > > >> to the
> > > >> > > > > community.
> > > >> > > > > > > > > > > > >> Especially now as we have kafka connectors,
> > > >> quarkus,
> > > >> > > > > spring boot as
> > > >> > > > > > > > > > > > >> sub projects and they all need to innovate,
> > > >> especially
> > > >> > > > > the first two.
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea
> Cosentino
> > > >> > > > > > > > > > > > >> <[hidden email]> wrote:
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02, Andrea
> > > >> Cosentino<
> > > >> > > > > > > > > > > [hidden email]>
> > > >> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super fine.
> I
> > > >> thought
> > > >> > > > > about the final
> > > >> > > > > > > > > > > > >> release of 3.1.
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> > Sorry, I misunderstood
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > >> > > > > [hidden email]> ha
> > > >> > > > > > > > > > > > >> scritto:
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >> > > Hi
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > > Oh sorry I think its actually better
> to get
> > > >> an RC cut
> > > >> > > > > this
> > > >> > > > > > > > > > > weekend.
> > > >> > > > > > > > > > > > >> > > The code is ready as-is.
> > > >> > > > > > > > > > > > >> > > Even though I found a little
> optimization I
> > > >> am
> > > >> > > > > currently working
> > > >> > > > > > > > > > > on.
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > > There are end users whom want 3.1 now
> as 3.0
> > > >> is
> > > >> > > > > "using too much
> > > >> > > > > > > > > > > object
> > > >> > > > > > > > > > > > >> > > allocations".
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > > Gregor so if you can find time then
> let us
> > > >> know.
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM Andrea
> > > >> Cosentino <
> > > >> > > > > > > > > > > [hidden email]>
> > > >> > > > > > > > > > > > >> > > wrote:
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > Hello Gregor,
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > There is still some work pending.
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > Probably torwards the end of
> February.
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > Thanks for your time
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor
> Zurowski <
> > > >> > > > > > > > > > > [hidden email]>
> > > >> > > > > > > > > > > > >> ha
> > > >> > > > > > > > > > > > >> > > > scritto:
> > > >> > > > > > > > > > > > >> > > >
> > > >> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC
> this
> > > >> weekend
> > > >> > > > > already?
> > > >> > > > > > > > > > > > >> > > > >
> > > >> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM Claus
> > > >> Ibsen <
> > > >> > > > > > > > > > > [hidden email]>
> > > >> > > > > > > > > > > > >> > > wrote:
> > > >> > > > > > > > > > > > >> > > > >
> > > >> > > > > > > > > > > > >> > > > > > Hi
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has been
> > > >> fixed, it
> > > >> > > > > works now again
> > > >> > > > > > > > > > > for
> > > >> > > > > > > > > > > > >> both
> > > >> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > > Gregor if you are listening,
> then can
> > > >> you let
> > > >> > > > > us know if you
> > > >> > > > > > > > > > > > >> have
> > > >> > > > > > > > > > > > >> > > time
> > > >> > > > > > > > > > > > >> > > > > > in the foreseeable future to
> built the
> > > >> release?
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM
> Claus
> > > >> Ibsen <
> > > >> > > > > > > > > > > > >> [hidden email]>
> > > >> > > > > > > > > > > > >> > > > > wrote:
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > Hi
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > Okay so things are going well.
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > The examples has been migrated.
> > > >> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is
> now
> > > >> online on
> > > >> > > > > the website.
> > > >> > > > > > > > > > > And
> > > >> > > > > > > > > > > > >> the
> > > >> > > > > > > > > > > > >> > > auto
> > > >> > > > > > > > > > > > >> > > > > > > configuration options is
> included in
> > > >> the
> > > >> > > > > component doc of
> > > >> > > > > > > > > > > > >> those
> > > >> > > > > > > > > > > > >> > > whom
> > > >> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > >> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is
> now
> > > >> also online.
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
> > > >> blueprint on
> > > >> > > > > Karaf with JDK8.
> > > >> > > > > > > > > > > > >> This
> > > >> > > > > > > > > > > > >> > > works
> > > >> > > > > > > > > > > > >> > > > > > > with JDK11.
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > As this potentially is a hard
> issue
> > > >> to
> > > >> > > > > resolve, then we
> > > >> > > > > > > > > > > can
> > > >> > > > > > > > > > > > >> add
> > > >> > > > > > > > > > > > >> > > this
> > > >> > > > > > > > > > > > >> > > > > > > as a known issue, and see if
> we can
> > > >> fix it
> > > >> > > > > for 3.1.1, or
> > > >> > > > > > > > > > > > >> worst-case
> > > >> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger
> changes.
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > The CI server looks good. I
> fixed
> > > >> the ES test
> > > >> > > > > errors that
> > > >> > > > > > > > > > > was
> > > >> > > > > > > > > > > > >> > > flaky.
> > > >> > > > > > > > > > > > >> > > > > > > The other test errors were also
> > > >> related to
> > > >> > > > > "port number in
> > > >> > > > > > > > > > > > >> use"
> > > >> > > > > > > > > > > > >> > > etc.
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf test
> > > >> errors related
> > > >> > > > > to SSL
> > > >> > > > > > > > > > > security
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > >
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > >
> > > >> > > > >
> > > >>
> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19
> AM
> > > >> Claus Ibsen <
> > > >> > > > > > > > > > > > >> > > [hidden email]>
> > > >> > > > > > > > > > > > >> > > > > > wrote:
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > Hi
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > Oh we have even more awesome
> > > >> progress now.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > All the work with reflection
> vs
> > > >> source code
> > > >> > > > > generated
> > > >> > > > > > > > > > > > >> > > configurers has
> > > >> > > > > > > > > > > > >> > > > > > bene done.
> > > >> > > > > > > > > > > > >> > > > > > > > And also on the model with
> the
> > > >> property
> > > >> > > > > placeholders.
> > > >> > > > > > > > > > > Thats
> > > >> > > > > > > > > > > > >> a
> > > >> > > > > > > > > > > > >> > > great
> > > >> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200
> > > >> classes and
> > > >> > > > > have about 90kb
> > > >> > > > > > > > > > > map
> > > >> > > > > > > > > > > > >> > > object
> > > >> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest
> object
> > > >> > > > > domination from Camel
> > > >> > > > > > > > > > > > >> > > according to
> > > >> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
> > > >> DefaultCamelContext
> > > >> > > > > again ;)
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue has
> also
> > > >> been
> > > >> > > > > fixed.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > The examples are currently
> being
> > > >> migrated
> > > >> > > > > and its
> > > >> > > > > > > > > > > removed
> > > >> > > > > > > > > > > > >> from
> > > >> > > > > > > > > > > > >> > > the
> > > >> > > > > > > > > > > > >> > > > > > main repo.
> > > >> > > > > > > > > > > > >> > > > > > > > Omar is working on this.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > The spring boot still has
> > > >> outstanding to
> > > >> > > > > have the docs
> > > >> > > > > > > > > > > and
> > > >> > > > > > > > > > > > >> its
> > > >> > > > > > > > > > > > >> > > > > website
> > > >> > > > > > > > > > > > >> > > > > > > > as part of the Camel website.
> > > >> > > > > > > > > > > > >> > > > > > > > Zoran will help with this.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > The etcd component has a
> wrong
> > > >> structure
> > > >> > > > > with
> > > >> > > > > > > > > > > > >> > > endpoints/components.
> > > >> > > > > > > > > > > > >> > > > > > > > I will look into this.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > The snakeyaml component
> needs to be
> > > >> > > > > deprecated, and if
> > > >> > > > > > > > > > > we
> > > >> > > > > > > > > > > > >> have
> > > >> > > > > > > > > > > > >> > > the
> > > >> > > > > > > > > > > > >> > > > > > > > time to add jacksonyaml as a
> new
> > > >> yaml
> > > >> > > > > dataformat and
> > > >> > > > > > > > > > > use it
> > > >> > > > > > > > > > > > >> as
> > > >> > > > > > > > > > > > >> > > > > > > > default.
> > > >> > > > > > > > > > > > >> > > > > > > > And if so remove snakeyaml.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > And then we need to fix test
> > > >> failures on CI
> > > >> > > > > on both
> > > >> > > > > > > > > > > JDK8 and
> > > >> > > > > > > > > > > > >> > > JDK11
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > And I may add a few more
> > > >> optimizations.
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > On Mon, Jan 27, 2020 at
> 11:18 AM
> > > >> Claus
> > > >> > > > > Ibsen <
> > > >> > > > > > > > > > > > >> > > [hidden email]>
> > > >> > > > > > > > > > > > >> > > > > > wrote:
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > Hi
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > I just wanted to start the
> > > >> process of
> > > >> > > > > getting closer
> > > >> > > > > > > > > > > to
> > > >> > > > > > > > > > > > >> Camel
> > > >> > > > > > > > > > > > >> > > 3.1
> > > >> > > > > > > > > > > > >> > > > > > release.
> > > >> > > > > > > > > > > > >> > > > > > > > > Despite 3.0 was released
> only a
> > > >> while
> > > >> > > > > back, then we
> > > >> > > > > > > > > > > have
> > > >> > > > > > > > > > > > >> made
> > > >> > > > > > > > > > > > >> > > great
> > > >> > > > > > > > > > > > >> > > > > > > > > progress on 3.1 that is
> > > >> important to get
> > > >> > > > > in the hands
> > > >> > > > > > > > > > > of
> > > >> > > > > > > > > > > > >> the
> > > >> > > > > > > > > > > > >> > > Camel
> > > >> > > > > > > > > > > > >> > > > > > > > > users. And for Camel users
> that
> > > >> migrate
> > > >> > > > > to 3.x can
> > > >> > > > > > > > > > > then
> > > >> > > > > > > > > > > > >> skip
> > > >> > > > > > > > > > > > >> > > 3.0
> > > >> > > > > > > > > > > > >> > > > > and
> > > >> > > > > > > > > > > > >> > > > > > > > > go straight to 3.1.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > I am working on some
> further
> > > >> > > > > optimizations in the core
> > > >> > > > > > > > > > > > >> for 3.1,
> > > >> > > > > > > > > > > > >> > > > > and I
> > > >> > > > > > > > > > > > >> > > > > > > > > hope to find time to share
> more
> > > >> details
> > > >> > > > > in a blog.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > However to get the other
> work
> > > >> (high
> > > >> > > > > level) done and
> > > >> > > > > > > > > > > ready
> > > >> > > > > > > > > > > > >> for
> > > >> > > > > > > > > > > > >> > > 3.1,
> > > >> > > > > > > > > > > > >> > > > > > > > > then lets discuss them
> here on
> > > >> the @dev
> > > >> > > > > mailing list.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > On top of my head we have
> to do
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > 1)
> > > >> > > > > > > > > > > > >> > > > > > > > > Finish the separation of
> > > >> > > > > camel-spring-boot (there are
> > > >> > > > > > > > > > > some
> > > >> > > > > > > > > > > > >> > > tools
> > > >> > > > > > > > > > > > >> > > > > that
> > > >> > > > > > > > > > > > >> > > > > > > > > update docs and generate
> > > >> component list)
> > > >> > > > > that needs
> > > >> > > > > > > > > > > to be
> > > >> > > > > > > > > > > > >> > > > > completed.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > 2)
> > > >> > > > > > > > > > > > >> > > > > > > > > Generate source code
> configurer
> > > >> for data
> > > >> > > > > formats and
> > > >> > > > > > > > > > > > >> languages
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > 3)
> > > >> > > > > > > > > > > > >> > > > > > > > > The component configuration
> > > >> fluent
> > > >> > > > > builder (would be
> > > >> > > > > > > > > > > nice)
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > 4)
> > > >> > > > > > > > > > > > >> > > > > > > > > More camel AWS SDK2
> components
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > 5)
> > > >> > > > > > > > > > > > >> > > > > > > > > Camel Main to plugin the
> new
> > > >> lightweight
> > > >> > > > > XML route
> > > >> > > > > > > > > > > > >> > > parser/loader
> > > >> > > > > > > > > > > > >> > > > > (for
> > > >> > > > > > > > > > > > >> > > > > > > > > example auto discover on
> > > >> classpath the
> > > >> > > > > JAR and use it
> > > >> > > > > > > > > > > > >> instead
> > > >> > > > > > > > > > > > >> > > of
> > > >> > > > > > > > > > > > >> > > > > > JAXB)
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > There are other things of
> > > >> course, but
> > > >> > > > > these are the
> > > >> > > > > > > > > > > > >> bigger high
> > > >> > > > > > > > > > > > >> > > > > level
> > > >> > > > > > > > > > > > >> > > > > > > > > things I could remember.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > The usual work with new
> > > >> components,
> > > >> > > > > examples, other
> > > >> > > > > > > > > > > > >> > > improvements is
> > > >> > > > > > > > > > > > >> > > > > > of
> > > >> > > > > > > > > > > > >> > > > > > > > > course also ongoing.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > Lets see if we can get
> this done
> > > >> and
> > > >> > > > > release Camel
> > > >> > > > > > > > > > > 3.1 in
> > > >> > > > > > > > > > > > >> > > February.
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > > --
> > > >> > > > > > > > > > > > >> > > > > > > > > Claus Ibsen
> > > >> > > > > > > > > > > > >> > > > > > > > > -----------------
> > > >> > > > > > > > > > > > >> > > > > > > > > http://davsclaus.com
> @davsclaus
> > > >> > > > > > > > > > > > >> > > > > > > > > Camel in Action 2:
> > > >> > > > > https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > > --
> > > >> > > > > > > > > > > > >> > > > > > > > Claus Ibsen
> > > >> > > > > > > > > > > > >> > > > > > > > -----------------
> > > >> > > > > > > > > > > > >> > > > > > > > http://davsclaus.com
> @davsclaus
> > > >> > > > > > > > > > > > >> > > > > > > > Camel in Action 2:
> > > >> > > > > https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > >
> > > >> > > > > > > > > > > > >> > > > > > > --
> > > >> > > > > > > > > > > > >> > > > > > > Claus Ibsen
> > > >> > > > > > > > > > > > >> > > > > > > -----------------
> > > >> > > > > > > > > > > > >> > > > > > > http://davsclaus.com
> @davsclaus
> > > >> > > > > > > > > > > > >> > > > > > > Camel in Action 2:
> > > >> > > > > https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > > > --
> > > >> > > > > > > > > > > > >> > > > > > Claus Ibsen
> > > >> > > > > > > > > > > > >> > > > > > -----------------
> > > >> > > > > > > > > > > > >> > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > > > > > >> > > > > > Camel in Action 2:
> > > >> > > > > https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >> > > > > >
> > > >> > > > > > > > > > > > >> > > > >
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> > > --
> > > >> > > > > > > > > > > > >> > > Claus Ibsen
> > > >> > > > > > > > > > > > >> > > -----------------
> > > >> > > > > > > > > > > > >> > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > > > > > >> > > Camel in Action 2:
> > > >> https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >> > >
> > > >> > > > > > > > > > > > >> >
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >> --
> > > >> > > > > > > > > > > > >> Claus Ibsen
> > > >> > > > > > > > > > > > >> -----------------
> > > >> > > > > > > > > > > > >> http://davsclaus.com @davsclaus
> > > >> > > > > > > > > > > > >> Camel in Action 2:
> > > >> https://www.manning.com/ibsen2
> > > >> > > > > > > > > > > > >>
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > --
> > > >> > > > > > > > > > > Claus Ibsen
> > > >> > > > > > > > > > > -----------------
> > > >> > > > > > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > > > > Camel in Action 2:
> https://www.manning.com/ibsen2
> > > >> > > > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > > --
> > > >> > > > > > > > > Claus Ibsen
> > > >> > > > > > > > > -----------------
> > > >> > > > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > > --
> > > >> > > > > > > > Claus Ibsen
> > > >> > > > > > > > -----------------
> > > >> > > > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > > > --
> > > >> > > > > > Claus Ibsen
> > > >> > > > > > -----------------
> > > >> > > > > > http://davsclaus.com @davsclaus
> > > >> > > > > > Camel in Action 2: https://www.manning.com/ibsen2
> > > >> > > > >
> > > >>
> > > >
>


--
------------------------
Guillaume Nodet
Reply | Threaded
Open this post in threaded view
|

Re: Closing Down on Apache Camel 3.1

Gregor Zurowski-2
Hi Guillaume,

Thanks for your fix, I will try it again in a bit and provide an update.

Thanks again,
Gregor


On Tue, Feb 18, 2020, 7:27 AM Guillaume Nodet <[hidden email]> wrote:

> Would you please try again ? I've pushed a change which will hopefully fix
> the problem.
>
> Le lun. 17 févr. 2020 à 21:14, Gregor Zurowski <[hidden email]>
> a
> écrit :
>
> > You can reproduce the problem by simply running the following (dry
> > run) command on the current master branch: "./mvnw release:prepare
> > -DdryRun -Prelease"
> >
> >
> > On Mon, Feb 17, 2020 at 9:12 PM Gregor Zurowski
> > <[hidden email]> wrote:
> > >
> > > I agree, but I received that message when building version 3.1.0:
> > >
> > > [INFO] [INFO]
> > ------------------------------------------------------------------------
> > > [INFO] [INFO] BUILD FAILURE
> > > [INFO] [INFO]
> > ------------------------------------------------------------------------
> > > [INFO] [INFO] Total time:  01:18 min
> > > [INFO] [INFO] Finished at: 2020-02-17T11:57:36-08:00
> > > [INFO] [INFO]
> > ------------------------------------------------------------------------
> > > [INFO] [ERROR] Failed to parse plugin descriptor for
> > > org.apache.camel:camel-bundle-plugin:3.0.1
> > >
> >
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> > > No plugin descriptor found at META-INF/maven/plugin.xml -> [Help 1]
> > > [INFO] [ERROR]
> > > [INFO] [ERROR] To see the full stack trace of the errors, re-run Maven
> > > with the -e switch.
> > > [INFO] [ERROR] Re-run Maven using the -X switch to enable full debug
> > logging.
> > > [INFO] [ERROR]
> > > [INFO] [ERROR] For more information about the errors and possible
> > > solutions, please read the following articles:
> > > [INFO] [ERROR] [Help 1]
> > >
> >
> http://cwiki.apache.org/confluence/display/MAVEN/PluginDescriptorParsingException
> > > [INFO]
> > ------------------------------------------------------------------------
> > > [INFO] Reactor Summary for Camel 3.1.0-SNAPSHOT:
> > > [...]
> > >
> > > On Mon, Feb 17, 2020 at 9:05 PM Andrea Cosentino <[hidden email]>
> > wrote:
> > > >
> > > > It should be the version you're releasing because is part of the 3.1
> > release
> > > >
> > > > Il lun 17 feb 2020, 21:04 Andrea Cosentino <[hidden email]> ha
> > scritto:
> > > >
> > > > > It shouldn't be 3.0.1
> > > > >
> > > > > Il lun 17 feb 2020, 21:00 Gregor Zurowski <
> [hidden email]>
> > ha
> > > > > scritto:
> > > > >
> > > > >> I've managed to work around the described problem regarding
> > > > >> camel-bundle-plugin by removing all explicit "<version>" tags, but
> > now
> > > > >> getting other problems:
> > > > >>
> > > > >> ===
> > > > >> [INFO] [ERROR] Failed to parse plugin descriptor for
> > > > >> org.apache.camel:camel-bundle-plugin:3.0.1
> > > > >>
> > > > >>
> >
> (/home/camel/.m2/repository/org/apache/camel/camel-bundle-plugin/3.0.1/camel-bundle-plugin-3.0.1.jar):
> > > > >> No plugin descriptor found at META-INF/maven/plugin.xml -> [Help
> 1]
> > > > >> ===
> > > > >>
> > > > >> Any ideas?
> > > > >>
> > > > >> Thanks,
> > > > >> Gregor
> > > > >>
> > > > >> On Mon, Feb 17, 2020 at 8:53 PM Gregor Zurowski
> > > > >> <[hidden email]> wrote:
> > > > >> >
> > > > >> > I am still working on it, and I believe I have found something
> to
> > fix
> > > > >> > it. I'll post an update shortly.
> > > > >> >
> > > > >> > On Mon, Feb 17, 2020 at 7:39 PM Andrea Cosentino
> > > > >> >
> > > > >> >
> > > > >> > <[hidden email]> wrote:
> > > > >> > >
> > > > >> > > Were you able to workaround it for the moment?
> > > > >> > >
> > > > >> > > --
> > > > >> > > Andrea Cosentino
> > > > >> > > ----------------------------------
> > > > >> > > Apache Camel PMC Chair
> > > > >> > > Apache Karaf Committer
> > > > >> > > Apache Servicemix PMC Member
> > > > >> > > Email: [hidden email]
> > > > >> > > Twitter: @oscerd2
> > > > >> > > Github: oscerd
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > > On Monday, February 17, 2020, 07:34:55 PM GMT+1, Gregor
> > Zurowski <
> > > > >> [hidden email]> wrote:
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > >
> > > > >> > > Yes, that's why I am not sure why the release plugin fails on
> > it. I
> > > > >> > > believe this worked without issues before the refactoring for
> > > > >> > > CAMEL-14444 that added the version tags explicitly to every
> > occurrence
> > > > >> > > where the camel-bundle-plugin is used.
> > > > >> > >
> > > > >> > >
> > > > >> > > On Mon, Feb 17, 2020 at 7:06 PM Andrea Cosentino <
> > [hidden email]>
> > > > >> wrote:
> > > > >> > > >
> > > > >> > > > If you run help:effective-pom the version seems to be
> correct
> > for it
> > > > >> > > >
> > > > >> > > >
> > > > >>
> > <camel-bundle-plugin-version>3.1.0-SNAPSHOT</camel-bundle-plugin-version>
> > > > >> > > >
> > > > >> > > > Il giorno lun 17 feb 2020 alle ore 17:42 Gregor Zurowski <
> > > > >> > > > [hidden email]> ha scritto:
> > > > >> > > >
> > > > >> > > > > Hi Claus,
> > > > >> > > > >
> > > > >> > > > > There's an assignment in the parent/pom.xml already:
> > > > >> > > > >
> > > > >> > > > >
> > > > >> > > > >
> > > > >>
> >
> <camel-bundle-plugin-version>${project.version}</camel-bundle-plugin-version>
> > > > >> > > > >
> > > > >> > > > > (see
> > > > >> https://github.com/apache/camel/blob/master/parent/pom.xml#L37)
> > > > >> > > > >
> > > > >> > > > > I am wondering why that isn't sufficient.
> > > > >> > > > >
> > > > >> > > > > Thanks,
> > > > >> > > > > Gregor
> > > > >> > > > >
> > > > >> > > > > On Mon, Feb 17, 2020 at 5:35 PM Claus Ibsen <
> > > > >> [hidden email]> wrote:
> > > > >> > > > > >
> > > > >> > > > > > Hi Gregor
> > > > >> > > > > >
> > > > >> > > > > > Thanks for starting the release.
> > > > >> > > > > >
> > > > >> > > > > > Yeah doing a git grep on that placeholders shows that
> its
> > never
> > > > >> > > > > > assigned a version.
> > > > >> > > > > > Since the plugin is part of the release, then it can
> > maybe just
> > > > >> be
> > > > >> > > > > > ${project.version} instead.
> > > > >> > > > > >
> > > > >> > > > > > On Mon, Feb 17, 2020 at 5:25 PM Gregor Zurowski
> > > > >> > > > > > <[hidden email]> wrote:
> > > > >> > > > > > >
> > > > >> > > > > > > Hi Everyone:
> > > > >> > > > > > >
> > > > >> > > > > > > I've started validating the branch for a 3.1 release
> > but I am
> > > > >> getting
> > > > >> > > > > > > the following error when preparing the release:
> > > > >> > > > > > >
> > > > >> > > > > > > [ERROR] Failed to execute goal
> > > > >> > > > > > >
> > org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > >> > > > > > > (default-cli) on project camel: The version could not
> be
> > > > >> updated:
> > > > >> > > > > > > ${camel-bundle-plugin-version} -> [Help 1]
> > > > >> > > > > > >
> org.apache.maven.lifecycle.LifecycleExecutionException:
> > > > >> Failed to
> > > > >> > > > > > > execute goal
> > > > >> > > > >
> org.apache.maven.plugins:maven-release-plugin:2.4.2:prepare
> > > > >> > > > > > > (default-cli) on project camel: The version could not
> be
> > > > >> updated:
> > > > >> > > > > > > ${camel-bundle-plugin-version}
> > > > >> > > > > > >
> > > > >> > > > > > > I know there have been some changes around
> > > > >> camel-bundle-plugin in
> > > > >> > > > > > >
> > > > >> https://issues.apache.org/jira/projects/CAMEL/issues/CAMEL-14444,
> > but
> > > > >> > > > > > > I am not sure what is causing the issues yet.
> > > > >> > > > > > >
> > > > >> > > > > > > Thanks,
> > > > >> > > > > > > Gregor
> > > > >> > > > > > >
> > > > >> > > > > > > On Sun, Feb 16, 2020 at 5:10 PM Claus Ibsen <
> > > > >> [hidden email]>
> > > > >> > > > > wrote:
> > > > >> > > > > > > >
> > > > >> > > > > > > > Hi
> > > > >> > > > > > > >
> > > > >> > > > > > > > Okay it should all be done now. The last bits at
> > pushed and
> > > > >> the code
> > > > >> > > > > > > > base is ready for the release.
> > > > >> > > > > > > > The RAT plugin has been run and fixed license issues
> > and
> > > > >> also CS
> > > > >> > > > > > > > should be fixed.
> > > > >> > > > > > > >
> > > > >> > > > > > > > On Sun, Feb 16, 2020 at 2:28 PM Claus Ibsen <
> > > > >> [hidden email]>
> > > > >> > > > > wrote:
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > Hi
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > I am still working, running final set of tests
> > before
> > > > >> pushing.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > There were just a few too good optimizations in
> > core type
> > > > >> converter
> > > > >> > > > > > > > > that I couldn't let go without.
> > > > >> > > > > > > > >
> > > > >> > > > > > > > >
> > > > >> > > > > > > > > On Sun, Feb 16, 2020 at 10:28 AM Gregor Zurowski
> > > > >> > > > > > > > > <[hidden email]> wrote:
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > Thanks for the heads-up.
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > On Sun, Feb 16, 2020, 10:02 AM Claus Ibsen <
> > > > >> > > > > [hidden email]> wrote:
> > > > >> > > > > > > > > >
> > > > >> > > > > > > > > > > Hi
> > > > >> > > > > > > > > > >
> > > > >> > > > > > > > > > > There are a few things I am working on. I will
> > let
> > > > >> you know
> > > > >> > > > > later
> > > > >> > > > > > > > > > > today when its done and the code base should
> be
> > ready
> > > > >> for
> > > > >> > > > > cutting the
> > > > >> > > > > > > > > > > 3.1.0 release.
> > > > >> > > > > > > > > > >
> > > > >> > > > > > > > > > > On Sat, Feb 15, 2020 at 8:22 PM Andrea
> > Cosentino <
> > > > >> > > > > [hidden email]>
> > > > >> > > > > > > > > > > wrote:
> > > > >> > > > > > > > > > > >
> > > > >> > > > > > > > > > > > If we want to cut 3.1.0 I'm fine with it I
> > can add
> > > > >> the other
> > > > >> > > > > aws2
> > > > >> > > > > > > > > > > > components later
> > > > >> > > > > > > > > > > >
> > > > >> > > > > > > > > > > > Il sab 15 feb 2020, 20:14 Andrea Cosentino <
> > > > >> > > > > [hidden email]> ha
> > > > >> > > > > > > > > > > scritto:
> > > > >> > > > > > > > > > > >
> > > > >> > > > > > > > > > > > > So we want an RC right? So we are doing
> > rc1? Or
> > > > >> do we want
> > > > >> > > > > a final
> > > > >> > > > > > > > > > > > > release? I still have to finish the aws2
> > > > >> components
> > > > >> > > > > > > > > > > > >
> > > > >> > > > > > > > > > > > > Il sab 15 feb 2020, 19:42 Claus Ibsen <
> > > > >> > > > > [hidden email]> ha
> > > > >> > > > > > > > > > > scritto:
> > > > >> > > > > > > > > > > > >
> > > > >> > > > > > > > > > > > >> Hi
> > > > >> > > > > > > > > > > > >>
> > > > >> > > > > > > > > > > > >> I actually think its fine with 3.1.0
> > release (eg
> > > > >> GA) and
> > > > >> > > > > not a RC1 RC2
> > > > >> > > > > > > > > > > > >> etc which we did for 3.0.
> > > > >> > > > > > > > > > > > >> After 3.1.0 we can do a final 3.0.2 patch
> > > > >> release and
> > > > >> > > > > encourage users
> > > > >> > > > > > > > > > > > >> to upgrade to 3.1.0.
> > > > >> > > > > > > > > > > > >>
> > > > >> > > > > > > > > > > > >> And then we can work on 3.2 and get it
> > released
> > > > >> within a
> > > > >> > > > > couple of
> > > > >> > > > > > > > > > > > >> months or so, eg to get innovation out
> > quicker
> > > > >> to the
> > > > >> > > > > community.
> > > > >> > > > > > > > > > > > >> Especially now as we have kafka
> connectors,
> > > > >> quarkus,
> > > > >> > > > > spring boot as
> > > > >> > > > > > > > > > > > >> sub projects and they all need to
> innovate,
> > > > >> especially
> > > > >> > > > > the first two.
> > > > >> > > > > > > > > > > > >>
> > > > >> > > > > > > > > > > > >>
> > > > >> > > > > > > > > > > > >> On Sat, Feb 15, 2020 at 6:11 PM Andrea
> > Cosentino
> > > > >> > > > > > > > > > > > >> <[hidden email]> wrote:
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> > I didn't read RC.. I'm getting old
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> > Inviato da Yahoo Mail su Android
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> >  Il sab, 15 feb, 2020 alle 18:02,
> Andrea
> > > > >> Cosentino<
> > > > >> > > > > > > > > > > [hidden email]>
> > > > >> > > > > > > > > > > > >> ha scritto:  Ah yeah, an RC is super
> fine.
> > I
> > > > >> thought
> > > > >> > > > > about the final
> > > > >> > > > > > > > > > > > >> release of 3.1.
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> > Sorry, I misunderstood
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> > Il sab 15 feb 2020, 17:50 Claus Ibsen <
> > > > >> > > > > [hidden email]> ha
> > > > >> > > > > > > > > > > > >> scritto:
> > > > >> > > > > > > > > > > > >> >
> > > > >> > > > > > > > > > > > >> > > Hi
> > > > >> > > > > > > > > > > > >> > >
> > > > >> > > > > > > > > > > > >> > > Oh sorry I think its actually better
> > to get
> > > > >> an RC cut
> > > > >> > > > > this
> > > > >> > > > > > > > > > > weekend.
> > > > >> > > > > > > > > > > > >> > > The code is ready as-is.
> > > > >> > > > > > > > > > > > >> > > Even though I found a little
> > optimization I
> > > > >> am
> > > > >> > > > > currently working
> > > > >> > > > > > > > > > > on.
> > > > >> > > > > > > > > > > > >> > >
> > > > >> > > > > > > > > > > > >> > > There are end users whom want 3.1 now
> > as 3.0
> > > > >> is
> > > > >> > > > > "using too much
> > > > >> > > > > > > > > > > object
> > > > >> > > > > > > > > > > > >> > > allocations".
> > > > >> > > > > > > > > > > > >> > >
> > > > >> > > > > > > > > > > > >> > > Gregor so if you can find time then
> > let us
> > > > >> know.
> > > > >> > > > > > > > > > > > >> > >
> > > > >> > > > > > > > > > > > >> > > On Sat, Feb 15, 2020 at 5:34 PM
> Andrea
> > > > >> Cosentino <
> > > > >> > > > > > > > > > > [hidden email]>
> > > > >> > > > > > > > > > > > >> > > wrote:
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > Hello Gregor,
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > There is still some work pending.
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > Probably torwards the end of
> > February.
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > Thanks for your time
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > Il sab 15 feb 2020, 17:26 Gregor
> > Zurowski <
> > > > >> > > > > > > > > > > [hidden email]>
> > > > >> > > > > > > > > > > > >> ha
> > > > >> > > > > > > > > > > > >> > > > scritto:
> > > > >> > > > > > > > > > > > >> > > >
> > > > >> > > > > > > > > > > > >> > > > > Absolutely, should we cut an RC
> > this
> > > > >> weekend
> > > > >> > > > > already?
> > > > >> > > > > > > > > > > > >> > > > >
> > > > >> > > > > > > > > > > > >> > > > > On Fri, Feb 14, 2020, 6:53 PM
> Claus
> > > > >> Ibsen <
> > > > >> > > > > > > > > > > [hidden email]>
> > > > >> > > > > > > > > > > > >> > > wrote:
> > > > >> > > > > > > > > > > > >> > > > >
> > > > >> > > > > > > > > > > > >> > > > > > Hi
> > > > >> > > > > > > > > > > > >> > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > The OSGi blueprint issue has
> been
> > > > >> fixed, it
> > > > >> > > > > works now again
> > > > >> > > > > > > > > > > for
> > > > >> > > > > > > > > > > > >> both
> > > > >> > > > > > > > > > > > >> > > > > > JDK8 and 11 on Karaf.
> > > > >> > > > > > > > > > > > >> > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > Gregor if you are listening,
> > then can
> > > > >> you let
> > > > >> > > > > us know if you
> > > > >> > > > > > > > > > > > >> have
> > > > >> > > > > > > > > > > > >> > > time
> > > > >> > > > > > > > > > > > >> > > > > > in the foreseeable future to
> > built the
> > > > >> release?
> > > > >> > > > > > > > > > > > >> > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > On Fri, Feb 14, 2020 at 1:09 PM
> > Claus
> > > > >> Ibsen <
> > > > >> > > > > > > > > > > > >> [hidden email]>
> > > > >> > > > > > > > > > > > >> > > > > wrote:
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > Hi
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > Okay so things are going
> well.
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > The examples has been
> migrated.
> > > > >> > > > > > > > > > > > >> > > > > > > Spring Boot documentation is
> > now
> > > > >> online on
> > > > >> > > > > the website.
> > > > >> > > > > > > > > > > And
> > > > >> > > > > > > > > > > > >> the
> > > > >> > > > > > > > > > > > >> > > auto
> > > > >> > > > > > > > > > > > >> > > > > > > configuration options is
> > included in
> > > > >> the
> > > > >> > > > > component doc of
> > > > >> > > > > > > > > > > > >> those
> > > > >> > > > > > > > > > > > >> > > whom
> > > > >> > > > > > > > > > > > >> > > > > > > support SB (see bottom).
> > > > >> > > > > > > > > > > > >> > > > > > > Camel Kafka Connector doc is
> > now
> > > > >> also online.
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > There is one issue with OSGi
> > > > >> blueprint on
> > > > >> > > > > Karaf with JDK8.
> > > > >> > > > > > > > > > > > >> This
> > > > >> > > > > > > > > > > > >> > > works
> > > > >> > > > > > > > > > > > >> > > > > > > with JDK11.
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > https://issues.apache.org/jira/browse/CAMEL-14561
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > As this potentially is a hard
> > issue
> > > > >> to
> > > > >> > > > > resolve, then we
> > > > >> > > > > > > > > > > can
> > > > >> > > > > > > > > > > > >> add
> > > > >> > > > > > > > > > > > >> > > this
> > > > >> > > > > > > > > > > > >> > > > > > > as a known issue, and see if
> > we can
> > > > >> fix it
> > > > >> > > > > for 3.1.1, or
> > > > >> > > > > > > > > > > > >> worst-case
> > > > >> > > > > > > > > > > > >> > > > > > > for 3.2 if we need bigger
> > changes.
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > The CI server looks good. I
> > fixed
> > > > >> the ES test
> > > > >> > > > > errors that
> > > > >> > > > > > > > > > > was
> > > > >> > > > > > > > > > > > >> > > flaky.
> > > > >> > > > > > > > > > > > >> > > > > > > The other test errors were
> also
> > > > >> related to
> > > > >> > > > > "port number in
> > > > >> > > > > > > > > > > > >> use"
> > > > >> > > > > > > > > > > > >> > > etc.
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > For JDK11 there are 2 cxf
> test
> > > > >> errors related
> > > > >> > > > > to SSL
> > > > >> > > > > > > > > > > security
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > >
> > > > >> > > > > > > > > > > > >> > > > >
> > > > >> > > > > > > > > > > > >> > >
> > > > >> > > > > > > > > > > > >>
> > > > >> > > > > > > > > > >
> > > > >> > > > >
> > > > >>
> >
> https://builds.apache.org/job/Camel%20JDK11/job/master/lastCompletedBuild/testReport/
> > > > >> > > > > > > > > > > > >> > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > On Wed, Feb 12, 2020 at 10:19
> > AM
> > > > >> Claus Ibsen <
> > > > >> > > > > > > > > > > > >> > > [hidden email]>
> > > > >> > > > > > > > > > > > >> > > > > > wrote:
> > > > >> > > > > > > > > > > > >> > > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > > Hi
> > > > >> > > > > > > > > > > > >> > > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > > Oh we have even more
> awesome
> > > > >> progress now.
> > > > >> > > > > > > > > > > > >> > > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > > All the work with
> reflection
> > vs
> > > > >> source code
> > > > >> > > > > generated
> > > > >> > > > > > > > > > > > >> > > configurers has
> > > > >> > > > > > > > > > > > >> > > > > > bene done.
> > > > >> > > > > > > > > > > > >> > > > > > > > And also on the model with
> > the
> > > > >> property
> > > > >> > > > > placeholders.
> > > > >> > > > > > > > > > > Thats
> > > > >> > > > > > > > > > > > >> a
> > > > >> > > > > > > > > > > > >> > > great
> > > > >> > > > > > > > > > > > >> > > > > > > > win as we avoid loading 200
> > > > >> classes and
> > > > >> > > > > have about 90kb
> > > > >> > > > > > > > > > > map
> > > > >> > > > > > > > > > > > >> > > object
> > > > >> > > > > > > > > > > > >> > > > > > > > instance in memory (biggest
> > object
> > > > >> > > > > domination from Camel
> > > > >> > > > > > > > > > > > >> > > according to
> > > > >> > > > > > > > > > > > >> > > > > > > > the profiler. Now its
> > > > >> DefaultCamelContext
> > > > >> > > > > again ;)
> > > > >> > > > > > > > > > > > >> > > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > > The OSGi blueprint issue
> has
> > also
> > > > >> been
> > > > >> > > > > fixed.
> > > > >> > > > > > > > > > > > >> > > > > > > >
> > > > >> > > > > > > > > > > > >> > > > > > > > The examples are currently
> > being
> > > > >> migrated
> > > > >> > > > > and its
> > > > >> > > > > > > > > > > removed
> > > > >> > > > > > > > > > > > >> from
> > > > >> > > > > > > > &g